freescale: Move the Freescale drivers

Move the Freescale drivers into drivers/net/ethernet/freescale/ and
make the necessary Kconfig and Makefile changes.

CC: Sandeep Gopalpet <sandeep.kumar@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
CC: Shlomi Gridish <gridish@freescale.com>
CC: Li Yang <leoli@freescale.com>
CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: Dan Malek <dmalek@jlc.net>
CC: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 494 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
new file mode 100644
index 000000000000..52f4e8ad48e7
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -0,0 +1,494 @@
+/*
+ * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Andy Fleming <afleming@freescale.com>
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
+ *
+ * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/ucc.h>
+
+#include "gianfar.h"
+#include "fsl_pq_mdio.h"
+
+struct fsl_pq_mdio_priv {
+	void __iomem *map;
+	struct fsl_pq_mdio __iomem *regs;
+};
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus attached to the local interface, which may be different from the
+ * generic mdio bus (tied to a single interface), waiting until the write is
+ * done before returning. This is helpful in programming interfaces like
+ * the TBI which control interfaces like onchip SERDES and are always tied to
+ * the local mdio pins, which may not be the same as system mdio bus, used for
+ * controlling the external PHYs, for example.
+ */
+int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
+		int regnum, u16 value)
+{
+	/* Set the PHY address and the register address we want to write */
+	out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+	/* Write out the value we want */
+	out_be32(&regs->miimcon, value);
+
+	/* Wait for the transaction to finish */
+	while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+		cpu_relax();
+
+	return 0;
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.  All PHY operation
+ * done on the bus attached to the local interface,
+ * which may be different from the generic mdio bus
+ * This is helpful in programming interfaces like
+ * the TBI which, in turn, control interfaces like onchip SERDES
+ * and are always tied to the local mdio pins, which may not be the
+ * same as system mdio bus, used for controlling the external PHYs, for eg.
+ */
+int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
+		int mii_id, int regnum)
+{
+	u16 value;
+
+	/* Set the PHY address and the register address we want to read */
+	out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+	/* Clear miimcom, and then initiate a read */
+	out_be32(&regs->miimcom, 0);
+	out_be32(&regs->miimcom, MII_READ_COMMAND);
+
+	/* Wait for the transaction to finish */
+	while (in_be32(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+		cpu_relax();
+
+	/* Grab the value of the register from miimstat */
+	value = in_be32(&regs->miimstat);
+
+	return value;
+}
+
+static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
+{
+	struct fsl_pq_mdio_priv *priv = bus->priv;
+
+	return priv->regs;
+}
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ */
+int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
+
+	/* Write to the local MII regs */
+	return fsl_pq_local_mdio_write(regs, mii_id, regnum, value);
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.
+ */
+int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
+
+	/* Read the local MII regs */
+	return fsl_pq_local_mdio_read(regs, mii_id, regnum);
+}
+
+/* Reset the MIIM registers, and wait for the bus to free */
+static int fsl_pq_mdio_reset(struct mii_bus *bus)
+{
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
+	int timeout = PHY_INIT_TIMEOUT;
+
+	mutex_lock(&bus->mdio_lock);
+
+	/* Reset the management interface */
+	out_be32(&regs->miimcfg, MIIMCFG_RESET);
+
+	/* Setup the MII Mgmt clock speed */
+	out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+	/* Wait until the bus is free */
+	while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
+		cpu_relax();
+
+	mutex_unlock(&bus->mdio_lock);
+
+	if (timeout < 0) {
+		printk(KERN_ERR "%s: The MII Bus is stuck!\n",
+				bus->name);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
+{
+	const u32 *addr;
+	u64 taddr = OF_BAD_ADDR;
+
+	addr = of_get_address(np, 0, NULL, NULL);
+	if (addr)
+		taddr = of_translate_address(np, addr);
+
+	snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
+		(unsigned long long)taddr);
+}
+EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
+
+/* Scan the bus in reverse, looking for an empty spot */
+static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
+{
+	int i;
+
+	for (i = PHY_MAX_ADDR; i > 0; i--) {
+		u32 phy_id;
+
+		if (get_phy_id(new_bus, i, &phy_id))
+			return -1;
+
+		if (phy_id == 0xffffffff)
+			break;
+	}
+
+	return i;
+}
+
+
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
+static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
+{
+	struct gfar __iomem *enet_regs;
+
+	/*
+	 * This is mildly evil, but so is our hardware for doing this.
+	 * Also, we have to cast back to struct gfar because of
+	 * definition weirdness done in gianfar.h.
+	 */
+	if(of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+		of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+		of_device_is_compatible(np, "gianfar")) {
+		enet_regs = (struct gfar __iomem *)regs;
+		return &enet_regs->tbipa;
+	} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi")) {
+		return of_iomap(np, 1);
+	} else
+		return NULL;
+}
+#endif
+
+
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
+static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
+{
+	struct device_node *np = NULL;
+	int err = 0;
+
+	for_each_compatible_node(np, NULL, "ucc_geth") {
+		struct resource tempres;
+
+		err = of_address_to_resource(np, 0, &tempres);
+		if (err)
+			continue;
+
+		/* if our mdio regs fall within this UCC regs range */
+		if ((start >= tempres.start) && (end <= tempres.end)) {
+			/* Find the id of the UCC */
+			const u32 *id;
+
+			id = of_get_property(np, "cell-index", NULL);
+			if (!id) {
+				id = of_get_property(np, "device-id", NULL);
+				if (!id)
+					continue;
+			}
+
+			*ucc_id = *id;
+
+			return 0;
+		}
+	}
+
+	if (err)
+		return err;
+	else
+		return -EINVAL;
+}
+#endif
+
+
+static int fsl_pq_mdio_probe(struct platform_device *ofdev)
+{
+	struct device_node *np = ofdev->dev.of_node;
+	struct device_node *tbi;
+	struct fsl_pq_mdio_priv *priv;
+	struct fsl_pq_mdio __iomem *regs = NULL;
+	void __iomem *map;
+	u32 __iomem *tbipa;
+	struct mii_bus *new_bus;
+	int tbiaddr = -1;
+	const u32 *addrp;
+	u64 addr = 0, size = 0;
+	int err;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	new_bus = mdiobus_alloc();
+	if (!new_bus) {
+		err = -ENOMEM;
+		goto err_free_priv;
+	}
+
+	new_bus->name = "Freescale PowerQUICC MII Bus",
+	new_bus->read = &fsl_pq_mdio_read,
+	new_bus->write = &fsl_pq_mdio_write,
+	new_bus->reset = &fsl_pq_mdio_reset,
+	new_bus->priv = priv;
+	fsl_pq_mdio_bus_name(new_bus->id, np);
+
+	addrp = of_get_address(np, 0, &size, NULL);
+	if (!addrp) {
+		err = -EINVAL;
+		goto err_free_bus;
+	}
+
+	/* Set the PHY base address */
+	addr = of_translate_address(np, addrp);
+	if (addr == OF_BAD_ADDR) {
+		err = -EINVAL;
+		goto err_free_bus;
+	}
+
+	map = ioremap(addr, size);
+	if (!map) {
+		err = -ENOMEM;
+		goto err_free_bus;
+	}
+	priv->map = map;
+
+	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+			of_device_is_compatible(np, "fsl,ucc-mdio") ||
+			of_device_is_compatible(np, "ucc_geth_phy"))
+		map -= offsetof(struct fsl_pq_mdio, miimcfg);
+	regs = map;
+	priv->regs = regs;
+
+	new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+
+	if (NULL == new_bus->irq) {
+		err = -ENOMEM;
+		goto err_unmap_regs;
+	}
+
+	new_bus->parent = &ofdev->dev;
+	dev_set_drvdata(&ofdev->dev, new_bus);
+
+	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+			of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi") ||
+			of_device_is_compatible(np, "gianfar")) {
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
+		tbipa = get_gfar_tbipa(regs, np);
+		if (!tbipa) {
+			err = -EINVAL;
+			goto err_free_irqs;
+		}
+#else
+		err = -ENODEV;
+		goto err_free_irqs;
+#endif
+	} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
+			of_device_is_compatible(np, "ucc_geth_phy")) {
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
+		u32 id;
+		static u32 mii_mng_master;
+
+		tbipa = &regs->utbipar;
+
+		if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
+			goto err_free_irqs;
+
+		if (!mii_mng_master) {
+			mii_mng_master = id;
+			ucc_set_qe_mux_mii_mng(id - 1);
+		}
+#else
+		err = -ENODEV;
+		goto err_free_irqs;
+#endif
+	} else {
+		err = -ENODEV;
+		goto err_free_irqs;
+	}
+
+	for_each_child_of_node(np, tbi) {
+		if (!strncmp(tbi->type, "tbi-phy", 8))
+			break;
+	}
+
+	if (tbi) {
+		const u32 *prop = of_get_property(tbi, "reg", NULL);
+
+		if (prop)
+			tbiaddr = *prop;
+	}
+
+	if (tbiaddr == -1) {
+		out_be32(tbipa, 0);
+
+		tbiaddr = fsl_pq_mdio_find_free(new_bus);
+	}
+
+	/*
+	 * We define TBIPA at 0 to be illegal, opting to fail for boards that
+	 * have PHYs at 1-31, rather than change tbipa and rescan.
+	 */
+	if (tbiaddr == 0) {
+		err = -EBUSY;
+
+		goto err_free_irqs;
+	}
+
+	out_be32(tbipa, tbiaddr);
+
+	err = of_mdiobus_register(new_bus, np);
+	if (err) {
+		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+				new_bus->name);
+		goto err_free_irqs;
+	}
+
+	return 0;
+
+err_free_irqs:
+	kfree(new_bus->irq);
+err_unmap_regs:
+	iounmap(priv->map);
+err_free_bus:
+	kfree(new_bus);
+err_free_priv:
+	kfree(priv);
+	return err;
+}
+
+
+static int fsl_pq_mdio_remove(struct platform_device *ofdev)
+{
+	struct device *device = &ofdev->dev;
+	struct mii_bus *bus = dev_get_drvdata(device);
+	struct fsl_pq_mdio_priv *priv = bus->priv;
+
+	mdiobus_unregister(bus);
+
+	dev_set_drvdata(device, NULL);
+
+	iounmap(priv->map);
+	bus->priv = NULL;
+	mdiobus_free(bus);
+	kfree(priv);
+
+	return 0;
+}
+
+static struct of_device_id fsl_pq_mdio_match[] = {
+	{
+		.type = "mdio",
+		.compatible = "ucc_geth_phy",
+	},
+	{
+		.type = "mdio",
+		.compatible = "gianfar",
+	},
+	{
+		.compatible = "fsl,ucc-mdio",
+	},
+	{
+		.compatible = "fsl,gianfar-tbi",
+	},
+	{
+		.compatible = "fsl,gianfar-mdio",
+	},
+	{
+		.compatible = "fsl,etsec2-tbi",
+	},
+	{
+		.compatible = "fsl,etsec2-mdio",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
+
+static struct platform_driver fsl_pq_mdio_driver = {
+	.driver = {
+		.name = "fsl-pq_mdio",
+		.owner = THIS_MODULE,
+		.of_match_table = fsl_pq_mdio_match,
+	},
+	.probe = fsl_pq_mdio_probe,
+	.remove = fsl_pq_mdio_remove,
+};
+
+int __init fsl_pq_mdio_init(void)
+{
+	return platform_driver_register(&fsl_pq_mdio_driver);
+}
+module_init(fsl_pq_mdio_init);
+
+void fsl_pq_mdio_exit(void)
+{
+	platform_driver_unregister(&fsl_pq_mdio_driver);
+}
+module_exit(fsl_pq_mdio_exit);
+MODULE_LICENSE("GPL");