Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...

1 files changed, 113 insertions, 0 deletions

diff --git a/drivers/net/ethernet/google/gve/gve_desc.h b/drivers/net/ethernet/google/gve/gve_desc.h
new file mode 100644
index 000000000000..54779871d52e
--- /dev/null
+++ b/drivers/net/ethernet/google/gve/gve_desc.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ * Google virtual Ethernet (gve) driver
+ *
+ * Copyright (C) 2015-2019 Google, Inc.
+ */
+
+/* GVE Transmit Descriptor formats */
+
+#ifndef _GVE_DESC_H_
+#define _GVE_DESC_H_
+
+#include <linux/build_bug.h>
+
+/* A note on seg_addrs
+ *
+ * Base addresses encoded in seg_addr are not assumed to be physical
+ * addresses. The ring format assumes these come from some linear address
+ * space. This could be physical memory, kernel virtual memory, user virtual
+ * memory. gVNIC uses lists of registered pages. Each queue is assumed
+ * to be associated with a single such linear address space to ensure a
+ * consistent meaning for seg_addrs posted to its rings.
+ */
+
+struct gve_tx_pkt_desc {
+	u8	type_flags;  /* desc type is lower 4 bits, flags upper */
+	u8	l4_csum_offset;  /* relative offset of L4 csum word */
+	u8	l4_hdr_offset;  /* Offset of start of L4 headers in packet */
+	u8	desc_cnt;  /* Total descriptors for this packet */
+	__be16	len;  /* Total length of this packet (in bytes) */
+	__be16	seg_len;  /* Length of this descriptor's segment */
+	__be64	seg_addr;  /* Base address (see note) of this segment */
+} __packed;
+
+struct gve_tx_seg_desc {
+	u8	type_flags;	/* type is lower 4 bits, flags upper	*/
+	u8	l3_offset;	/* TSO: 2 byte units to start of IPH	*/
+	__be16	reserved;
+	__be16	mss;		/* TSO MSS				*/
+	__be16	seg_len;
+	__be64	seg_addr;
+} __packed;
+
+/* GVE Transmit Descriptor Types */
+#define	GVE_TXD_STD		(0x0 << 4) /* Std with Host Address	*/
+#define	GVE_TXD_TSO		(0x1 << 4) /* TSO with Host Address	*/
+#define	GVE_TXD_SEG		(0x2 << 4) /* Seg with Host Address	*/
+
+/* GVE Transmit Descriptor Flags for Std Pkts */
+#define	GVE_TXF_L4CSUM	BIT(0)	/* Need csum offload */
+#define	GVE_TXF_TSTAMP	BIT(2)	/* Timestamp required */
+
+/* GVE Transmit Descriptor Flags for TSO Segs */
+#define	GVE_TXSF_IPV6	BIT(1)	/* IPv6 TSO */
+
+/* GVE Receive Packet Descriptor */
+/* The start of an ethernet packet comes 2 bytes into the rx buffer.
+ * gVNIC adds this padding so that both the DMA and the L3/4 protocol header
+ * access is aligned.
+ */
+#define GVE_RX_PAD 2
+
+struct gve_rx_desc {
+	u8	padding[48];
+	__be32	rss_hash;  /* Receive-side scaling hash (Toeplitz for gVNIC) */
+	__be16	mss;
+	__be16	reserved;  /* Reserved to zero */
+	u8	hdr_len;  /* Header length (L2-L4) including padding */
+	u8	hdr_off;  /* 64-byte-scaled offset into RX_DATA entry */
+	__sum16	csum;  /* 1's-complement partial checksum of L3+ bytes */
+	__be16	len;  /* Length of the received packet */
+	__be16	flags_seq;  /* Flags [15:3] and sequence number [2:0] (1-7) */
+} __packed;
+static_assert(sizeof(struct gve_rx_desc) == 64);
+
+/* As with the Tx ring format, the qpl_offset entries below are offsets into an
+ * ordered list of registered pages.
+ */
+struct gve_rx_data_slot {
+	/* byte offset into the rx registered segment of this slot */
+	__be64 qpl_offset;
+};
+
+/* GVE Recive Packet Descriptor Seq No */
+#define GVE_SEQNO(x) (be16_to_cpu(x) & 0x7)
+
+/* GVE Recive Packet Descriptor Flags */
+#define GVE_RXFLG(x)	cpu_to_be16(1 << (3 + (x)))
+#define	GVE_RXF_FRAG	GVE_RXFLG(3)	/* IP Fragment			*/
+#define	GVE_RXF_IPV4	GVE_RXFLG(4)	/* IPv4				*/
+#define	GVE_RXF_IPV6	GVE_RXFLG(5)	/* IPv6				*/
+#define	GVE_RXF_TCP	GVE_RXFLG(6)	/* TCP Packet			*/
+#define	GVE_RXF_UDP	GVE_RXFLG(7)	/* UDP Packet			*/
+#define	GVE_RXF_ERR	GVE_RXFLG(8)	/* Packet Error Detected	*/
+
+/* GVE IRQ */
+#define GVE_IRQ_ACK	BIT(31)
+#define GVE_IRQ_MASK	BIT(30)
+#define GVE_IRQ_EVENT	BIT(29)
+
+static inline bool gve_needs_rss(__be16 flag)
+{
+	if (flag & GVE_RXF_FRAG)
+		return false;
+	if (flag & (GVE_RXF_IPV4 | GVE_RXF_IPV6))
+		return true;
+	return false;
+}
+
+static inline u8 gve_next_seqno(u8 seq)
+{
+	return (seq + 1) == 8 ? 1 : seq + 1;
+}
+#endif /* _GVE_DESC_H_ */