i40evf: add ndo_setup_tc callback to i40evf

This patch introduces the callback to the ndo_setup_tc function
in the VF driver. We add a wrapper function to make room for the
upcoming cloud filter patches which add calls to different functions
from setup_tc.

First, we add support for capability exchange for ADQ between the
PF and VF. Next, we add support to take in the mqprio configuration
and configure queues as per the traffic classes, rate limit and the
priorities specified by the user. This is done by passing the channel
config to the PF driver through a virtchannel message.

The flags and bits added, track if ADq is enabled, set max number of
traffic classes to 4 and provide ability to negotiate capability with
the PF.

Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 154 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 0776b07477a2..099d4f59e445 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1732,6 +1732,17 @@ static void i40evf_watchdog_task(struct work_struct *work)
 		i40evf_set_promiscuous(adapter, 0);
 		goto watchdog_done;
 	}
+
+	if (adapter->aq_required & I40EVF_FLAG_AQ_ENABLE_CHANNELS) {
+		i40evf_enable_channels(adapter);
+		goto watchdog_done;
+	}
+
+	if (adapter->aq_required & I40EVF_FLAG_AQ_DISABLE_CHANNELS) {
+		i40evf_disable_channels(adapter);
+		goto watchdog_done;
+	}
+
 	schedule_delayed_work(&adapter->client_task, msecs_to_jiffies(5));
 
 	if (adapter->state == __I40EVF_RUNNING)
@@ -2212,6 +2223,148 @@ void i40evf_free_all_rx_resources(struct i40evf_adapter *adapter)
 }
 
 /**
+ * i40evf_validate_channel_config - validate queue mapping info
+ * @adapter: board private structure
+ * @mqprio_qopt: queue parameters
+ *
+ * This function validates if the config provided by the user to
+ * configure queue channels is valid or not. Returns 0 on a valid
+ * config.
+ **/
+static int i40evf_validate_ch_config(struct i40evf_adapter *adapter,
+				     struct tc_mqprio_qopt_offload *mqprio_qopt)
+{
+	int i, num_qps = 0;
+
+	if (mqprio_qopt->qopt.num_tc > I40EVF_MAX_TRAFFIC_CLASS ||
+	    mqprio_qopt->qopt.num_tc < 1)
+		return -EINVAL;
+
+	for (i = 0; i <= mqprio_qopt->qopt.num_tc - 1; i++) {
+		if (!mqprio_qopt->qopt.count[i] ||
+		    mqprio_qopt->min_rate[i] ||
+		    mqprio_qopt->max_rate[i] ||
+		    mqprio_qopt->qopt.offset[i] != num_qps)
+			return -EINVAL;
+		num_qps += mqprio_qopt->qopt.count[i];
+	}
+	if (num_qps > MAX_QUEUES)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * __i40evf_setup_tc - configure multiple traffic classes
+ * @netdev: network interface device structure
+ * @type_date: tc offload data
+ *
+ * This function processes the config information provided by the
+ * user to configure traffic classes/queue channels and packages the
+ * information to request the PF to setup traffic classes.
+ *
+ * Returns 0 on success.
+ **/
+static int __i40evf_setup_tc(struct net_device *netdev, void *type_data)
+{
+	struct tc_mqprio_qopt_offload *mqprio_qopt = type_data;
+	struct i40evf_adapter *adapter = netdev_priv(netdev);
+	struct virtchnl_vf_resource *vfres = adapter->vf_res;
+	u8 num_tc = 0, total_qps = 0;
+	int ret = 0, netdev_tc = 0;
+	u16 mode;
+	int i;
+
+	num_tc = mqprio_qopt->qopt.num_tc;
+	mode = mqprio_qopt->mode;
+
+	/* delete queue_channel */
+	if (!mqprio_qopt->qopt.hw) {
+		if (adapter->ch_config.state == __I40EVF_TC_RUNNING) {
+			/* reset the tc configuration */
+			netdev_reset_tc(netdev);
+			adapter->num_tc = 0;
+			netif_tx_stop_all_queues(netdev);
+			netif_tx_disable(netdev);
+			adapter->aq_required = I40EVF_FLAG_AQ_DISABLE_CHANNELS;
+			goto exit;
+		} else {
+			return -EINVAL;
+		}
+	}
+
+	/* add queue channel */
+	if (mode == TC_MQPRIO_MODE_CHANNEL) {
+		if (!(vfres->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_ADQ)) {
+			dev_err(&adapter->pdev->dev, "ADq not supported\n");
+			return -EOPNOTSUPP;
+		}
+		if (adapter->ch_config.state != __I40EVF_TC_INVALID) {
+			dev_err(&adapter->pdev->dev, "TC configuration already exists\n");
+			return -EINVAL;
+		}
+
+		ret = i40evf_validate_ch_config(adapter, mqprio_qopt);
+		if (ret)
+			return ret;
+		/* Return if same TC config is requested */
+		if (adapter->num_tc == num_tc)
+			return 0;
+		adapter->num_tc = num_tc;
+
+		for (i = 0; i < I40EVF_MAX_TRAFFIC_CLASS; i++) {
+			if (i < num_tc) {
+				adapter->ch_config.ch_info[i].count =
+					mqprio_qopt->qopt.count[i];
+				adapter->ch_config.ch_info[i].offset =
+					mqprio_qopt->qopt.offset[i];
+				total_qps += mqprio_qopt->qopt.count[i];
+			} else {
+				adapter->ch_config.ch_info[i].count = 1;
+				adapter->ch_config.ch_info[i].offset = 0;
+			}
+		}
+		adapter->ch_config.total_qps = total_qps;
+		netif_tx_stop_all_queues(netdev);
+		netif_tx_disable(netdev);
+		adapter->aq_required |= I40EVF_FLAG_AQ_ENABLE_CHANNELS;
+		netdev_reset_tc(netdev);
+		/* Report the tc mapping up the stack */
+		netdev_set_num_tc(adapter->netdev, num_tc);
+		for (i = 0; i < I40EVF_MAX_TRAFFIC_CLASS; i++) {
+			u16 qcount = mqprio_qopt->qopt.count[i];
+			u16 qoffset = mqprio_qopt->qopt.offset[i];
+
+			if (i < num_tc)
+				netdev_set_tc_queue(netdev, netdev_tc++, qcount,
+						    qoffset);
+		}
+	}
+exit:
+	return ret;
+}
+
+/**
+ * i40evf_setup_tc - configure multiple traffic classes
+ * @netdev: network interface device structure
+ * @type: type of offload
+ * @type_date: tc offload data
+ *
+ * This function is the callback to ndo_setup_tc in the
+ * netdev_ops.
+ *
+ * Returns 0 on success
+ **/
+static int i40evf_setup_tc(struct net_device *netdev, enum tc_setup_type type,
+			   void *type_data)
+{
+	if (type != TC_SETUP_QDISC_MQPRIO)
+		return -EOPNOTSUPP;
+
+	return __i40evf_setup_tc(netdev, type_data);
+}
+
+/**
  * i40evf_open - Called when a network interface is made active
  * @netdev: network interface device structure
  *
@@ -2478,6 +2631,7 @@ static const struct net_device_ops i40evf_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= i40evf_netpoll,
 #endif
+	.ndo_setup_tc		= i40evf_setup_tc,
 };
 
 /**