diff options
| author |   Jesse Brandeburg <jesse.brandeburg@intel.com> | 2022-07-27 09:24:05 +0200 |
|---|---|---|
| committer |   Tony Nguyen <anthony.l.nguyen@intel.com> | 2022-08-18 08:08:23 -0700 |
| commit | dddd406d9dbe4a94919b377a84b696e97f709379 (patch) | |
| tree | 8bc58b69f58b12d208372c4ec168e4bb899cf66d /drivers/net/ethernet/intel/ice/ice_ethtool.c | |
| parent | stmmac: intel: remove unused 'has_crossts' flag (diff) | |
| download | linux-dev-dddd406d9dbe4a94919b377a84b696e97f709379.tar.xz linux-dev-dddd406d9dbe4a94919b377a84b696e97f709379.zip | |
ice: Implement control of FCS/CRC stripping
The driver can allow the user to configure whether the CRC aka the FCS
(Frame Check Sequence) is DMA'd to the host as part of the receive
buffer. The driver usually wants this feature disabled so that the
hardware checks the FCS and strips it in order to save PCI bandwidth.
Control the reception of FCS to the host using the command:
ethtool -K eth0 rx-fcs <on|off>
The default shown in ethtool -k eth0 | grep fcs; should be "off", as the
hardware will drop any frame with a bad checksum, and DMA of the
checksum is useless overhead especially for small packets.
Testing Hints:
test the FCS/CRC arrives with received packets using
tcpdump -nnpi eth0 -xxxx
and it should show crc data as the last 4 bytes of the packet. Can also
use wireshark to turn on CRC checking and check the data is correct.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Co-developed-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ice/ice_ethtool.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ice/ice_ethtool.c | 5 |
1 files changed, 1 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 0f0faa8dc7fb..ad6cffb2d3e0 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -1289,10 +1289,7 @@ static int ice_set_priv_flags(struct net_device *netdev, u32 flags) } if (test_bit(ICE_FLAG_LEGACY_RX, change_flags)) { /* down and up VSI so that changes of Rx cfg are reflected. */ - if (!test_and_set_bit(ICE_VSI_DOWN, vsi->state)) { - ice_down(vsi); - ice_up(vsi); - } + ice_down_up(vsi); } /* don't allow modification of this flag when a single VF is in * promiscuous mode because it's not supported |