diff options
author | Alexander Duyck <alexander.h.duyck@intel.com> | 2018-07-20 18:29:34 -0400 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2018-07-26 09:04:06 -0700 |
commit | 1918e937ca3b4270181e6f05734d5240306bd2cf (patch) | |
tree | 15ef9c57304c13e9cc078db5d4606c01be0724d1 /drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | |
parent | ixgbe: Reorder Tx/Rx shutdown to reduce time needed to stop device (diff) | |
download | linux-dev-1918e937ca3b4270181e6f05734d5240306bd2cf.tar.xz linux-dev-1918e937ca3b4270181e6f05734d5240306bd2cf.zip |
ixgbe: Refactor queue disable logic to take completion time into account
This change is meant to allow us to take completion time into account when
disabling queues. Previously we were just working with hard coded values
for how long we should wait. This worked fine for the standard case where
completion timeout was operating in the 50us to 50ms range, however on
platforms that have higher completion timeout times this was resulting in
Rx queues disable messages being displayed as we weren't waiting long
enough for outstanding Rx DMA completions.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 32 |
1 files changed, 7 insertions, 25 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 1d688840cd6c..e5a8461fe6a9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1698,35 +1698,17 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter) { - struct ixgbe_ring *tx_ring = &adapter->test_tx_ring; - struct ixgbe_ring *rx_ring = &adapter->test_rx_ring; - struct ixgbe_hw *hw = &adapter->hw; - u32 reg_ctl; - - /* shut down the DMA engines now so they can be reinitialized later */ + /* Shut down the DMA engines now so they can be reinitialized later, + * since the test rings and normally used rings should overlap on + * queue 0 we can just use the standard disable Rx/Tx calls and they + * will take care of disabling the test rings for us. + */ /* first Rx */ - hw->mac.ops.disable_rx(hw); - ixgbe_disable_rx_queue(adapter, rx_ring); + ixgbe_disable_rx(adapter); /* now Tx */ - reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx)); - reg_ctl &= ~IXGBE_TXDCTL_ENABLE; - IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl); - - switch (hw->mac.type) { - case ixgbe_mac_82599EB: - case ixgbe_mac_X540: - case ixgbe_mac_X550: - case ixgbe_mac_X550EM_x: - case ixgbe_mac_x550em_a: - reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); - reg_ctl &= ~IXGBE_DMATXCTL_TE; - IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl); - break; - default: - break; - } + ixgbe_disable_tx(adapter); ixgbe_reset(adapter); |