net/mlx5: FPGA, Add basic support for Innova

Mellanox Innova is a NIC with ConnectX and an FPGA on the same
board. The FPGA is a bump-on-the-wire and thus affects operation of
the mlx5_core driver on the ConnectX ASIC.

Add basic support for Innova in mlx5_core.

This allows using the Innova card as a regular NIC, by detecting
the FPGA capability bit, and verifying its load state before
initializing ConnectX interfaces.

Also detect FPGA fatal runtime failures and enter error state if
they ever happen.

All new FPGA-related logic is placed in its own subdirectory 'fpga',
which may be built by selecting CONFIG_MLX5_FPGA.
This prepares for further support of various Innova features in later
patchsets.
Additional details about hardware architecture will be provided as
more features get submitted.

Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1 files changed, 10 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index fc52d742b7f7..28cf88483ca4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -11,6 +11,16 @@ config MLX5_CORE
 	  Core driver for low level functionality of the ConnectX-4 and
 	  Connect-IB cards by Mellanox Technologies.
 
+config MLX5_FPGA
+        bool "Mellanox Technologies Innova support"
+        depends on MLX5_CORE
+        ---help---
+          Build support for the Innova family of network cards by Mellanox
+          Technologies. Innova network cards are comprised of a ConnectX chip
+          and an FPGA chip on one board. If you select this option, the
+          mlx5_core driver will include the Innova FPGA core and allow building
+          sandbox-specific client drivers.
+
 config MLX5_CORE_EN
 	bool "Mellanox Technologies ConnectX-4 Ethernet support"
 	depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE