Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Merge mlx5-next shared branched into net-next,

From Bodong Wang:
1) Introduction of ECPF (Embedded CPU Physical Function), and low level
bits for mlx5 SmartNic capabilities support.
2) Vport enumeration refactoring that affect mlx5_ib and mlx5_core

From Aya Levin,
3) Add support for 50Gbps per lane link modes in the Port Type and Speed
register (PTYS)
4) Refactor low level query functions for PTYS register
5) Add support for 50Gbps per lane link modes to mlx5_ib

Note: due to a change in API in mlx5/core and a later patch from net-next,
a fixup was squashed with this merge commit that replaces FDB_UPLINK_VPORT
with MLX5_VPORT_UPLINK which exists only in upstream net-next.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1 files changed, 11 insertions, 17 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 3bbccead2f63..769c3c74bbcb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -695,13 +695,14 @@ static void get_speed_duplex(struct net_device *netdev,
 			     u32 eth_proto_oper,
 			     struct ethtool_link_ksettings *link_ksettings)
 {
+	struct mlx5e_priv *priv = netdev_priv(netdev);
 	u32 speed = SPEED_UNKNOWN;
 	u8 duplex = DUPLEX_UNKNOWN;
 
 	if (!netif_carrier_ok(netdev))
 		goto out;
 
-	speed = mlx5e_port_ptys2speed(eth_proto_oper);
+	speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper);
 	if (!speed) {
 		speed = SPEED_UNKNOWN;
 		goto out;
@@ -885,7 +886,7 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
 				     const struct ethtool_link_ksettings *link_ksettings)
 {
 	struct mlx5_core_dev *mdev = priv->mdev;
-	u32 eth_proto_cap, eth_proto_admin;
+	struct mlx5e_port_eth_proto eproto;
 	bool an_changes = false;
 	u8 an_disable_admin;
 	u8 an_disable_cap;
@@ -899,16 +900,16 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
 
 	link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ?
 		mlx5e_ethtool2ptys_adver_link(link_ksettings->link_modes.advertising) :
-		mlx5e_port_speed2linkmodes(speed);
+		mlx5e_port_speed2linkmodes(mdev, speed);
 
-	err = mlx5_query_port_proto_cap(mdev, &eth_proto_cap, MLX5_PTYS_EN);
+	err = mlx5_port_query_eth_proto(mdev, 1, false, &eproto);
 	if (err) {
-		netdev_err(priv->netdev, "%s: query port eth proto cap failed: %d\n",
+		netdev_err(priv->netdev, "%s: query port eth proto failed: %d\n",
 			   __func__, err);
 		goto out;
 	}
 
-	link_modes = link_modes & eth_proto_cap;
+	link_modes = link_modes & eproto.cap;
 	if (!link_modes) {
 		netdev_err(priv->netdev, "%s: Not supported link mode(s) requested",
 			   __func__);
@@ -916,24 +917,17 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
 		goto out;
 	}
 
-	err = mlx5_query_port_proto_admin(mdev, &eth_proto_admin, MLX5_PTYS_EN);
-	if (err) {
-		netdev_err(priv->netdev, "%s: query port eth proto admin failed: %d\n",
-			   __func__, err);
-		goto out;
-	}
-
-	mlx5_query_port_autoneg(mdev, MLX5_PTYS_EN, &an_status,
-				&an_disable_cap, &an_disable_admin);
+	mlx5_port_query_eth_autoneg(mdev, &an_status, &an_disable_cap,
+				    &an_disable_admin);
 
 	an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE;
 	an_changes = ((!an_disable && an_disable_admin) ||
 		      (an_disable && !an_disable_admin));
 
-	if (!an_changes && link_modes == eth_proto_admin)
+	if (!an_changes && link_modes == eproto.admin)
 		goto out;
 
-	mlx5_set_port_ptys(mdev, an_disable, link_modes, MLX5_PTYS_EN);
+	mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, false);
 	mlx5_toggle_port_link(mdev);
 
 out: