net/mlx5e: Query minimum required header copy during xmit

Add support for query the minimum inline mode from the Firmware.
It is required for correct TX steering according to L3/L4 packet
headers.

Each send queue (SQ) has inline mode that defines the minimal required
headers that needs to be copied into the SQ WQE.
The driver asks the Firmware for the wqe_inline_mode device capability
value.  In case the device capability defined as "vport context" the
driver must check the reported min inline mode from the vport context
before creating its SQs.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 24 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index bdcb699fe63e..870bea37c57c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -56,6 +56,7 @@ struct mlx5e_sq_param {
 	u32                        sqc[MLX5_ST_SZ_DW(sqc)];
 	struct mlx5_wq_param       wq;
 	u16                        max_inline;
+	u8                         min_inline_mode;
 	bool                       icosq;
 };
 
@@ -649,6 +650,9 @@ static int mlx5e_create_sq(struct mlx5e_channel *c,
 	}
 	sq->bf_buf_size = (1 << MLX5_CAP_GEN(mdev, log_bf_reg_size)) / 2;
 	sq->max_inline  = param->max_inline;
+	sq->min_inline_mode =
+		MLX5_CAP_ETH(mdev, wqe_inline_mode) == MLX5E_INLINE_MODE_VPORT_CONTEXT ?
+		param->min_inline_mode : 0;
 
 	err = mlx5e_alloc_sq_db(sq, cpu_to_node(c->cpu));
 	if (err)
@@ -731,6 +735,7 @@ static int mlx5e_enable_sq(struct mlx5e_sq *sq, struct mlx5e_sq_param *param)
 
 	MLX5_SET(sqc,  sqc, tis_num_0, param->icosq ? 0 : priv->tisn[sq->tc]);
 	MLX5_SET(sqc,  sqc, cqn,		sq->cq.mcq.cqn);
+	MLX5_SET(sqc,  sqc, min_wqe_inline_mode, sq->min_inline_mode);
 	MLX5_SET(sqc,  sqc, state,		MLX5_SQC_STATE_RST);
 	MLX5_SET(sqc,  sqc, tis_lst_sz,		param->icosq ? 0 : 1);
 	MLX5_SET(sqc,  sqc, flush_in_error_en,	1);
@@ -1343,6 +1348,7 @@ static void mlx5e_build_sq_param(struct mlx5e_priv *priv,
 	MLX5_SET(wq, wq, log_wq_sz,     priv->params.log_sq_size);
 
 	param->max_inline = priv->params.tx_max_inline;
+	param->min_inline_mode = priv->params.tx_min_inline_mode;
 }
 
 static void mlx5e_build_common_cq_param(struct mlx5e_priv *priv,
@@ -2978,6 +2984,23 @@ void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode)
 			MLX5E_PARAMS_DEFAULT_RX_CQ_MODERATION_USEC_FROM_CQE;
 }
 
+static void mlx5e_query_min_inline(struct mlx5_core_dev *mdev,
+				   u8 *min_inline_mode)
+{
+	switch (MLX5_CAP_ETH(mdev, wqe_inline_mode)) {
+	case MLX5E_INLINE_MODE_L2:
+		*min_inline_mode = MLX5_INLINE_MODE_L2;
+		break;
+	case MLX5E_INLINE_MODE_VPORT_CONTEXT:
+		mlx5_query_nic_vport_min_inline(mdev,
+						min_inline_mode);
+		break;
+	case MLX5_INLINE_MODE_NOT_REQUIRED:
+		*min_inline_mode = MLX5_INLINE_MODE_NONE;
+		break;
+	}
+}
+
 static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
 					struct net_device *netdev,
 					const struct mlx5e_profile *profile,
@@ -3043,6 +3066,7 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
 	priv->params.tx_cq_moderation.pkts =
 		MLX5E_PARAMS_DEFAULT_TX_CQ_MODERATION_PKTS;
 	priv->params.tx_max_inline         = mlx5e_get_max_inline_cap(mdev);
+	mlx5e_query_min_inline(mdev, &priv->params.tx_min_inline_mode);
 	priv->params.num_tc                = 1;
 	priv->params.rss_hfunc             = ETH_RSS_HASH_XOR;