net/mlx5: Add fast unload support in shutdown flow

Adding a support to flush all HW resources with one FW command and
skip all the heavy unload flows of the driver on kernel shutdown.
There's no need to free all the SW context since a new fresh kernel
will be loaded afterwards.

Regarding the FW resources, they should be closed, otherwise we will
have leakage in the FW. To accelerate this flow, we execute one command
in the beginning that tells the FW that the driver isn't going to close
any of the FW resources and asks the FW to clean up everything.
Once the commands complete, it's safe to close the PCI resources and
finish the routine.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1 files changed, 28 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
index 1bc14d0fded8..e9489e8d08bb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
@@ -195,3 +195,31 @@ int mlx5_cmd_teardown_hca(struct mlx5_core_dev *dev)
 	MLX5_SET(teardown_hca_in, in, opcode, MLX5_CMD_OP_TEARDOWN_HCA);
 	return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
 }
+
+int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
+{
+	u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {0};
+	u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {0};
+	int force_state;
+	int ret;
+
+	if (!MLX5_CAP_GEN(dev, force_teardown)) {
+		mlx5_core_dbg(dev, "force teardown is not supported in the firmware\n");
+		return -EOPNOTSUPP;
+	}
+
+	MLX5_SET(teardown_hca_in, in, opcode, MLX5_CMD_OP_TEARDOWN_HCA);
+	MLX5_SET(teardown_hca_in, in, profile, MLX5_TEARDOWN_HCA_IN_PROFILE_FORCE_CLOSE);
+
+	ret = mlx5_cmd_exec_polling(dev, in, sizeof(in), out, sizeof(out));
+	if (ret)
+		return ret;
+
+	force_state = MLX5_GET(teardown_hca_out, out, force_state);
+	if (force_state == MLX5_TEARDOWN_HCA_OUT_FORCE_STATE_FAIL) {
+		mlx5_core_err(dev, "teardown with force mode failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}