mlxsw: spectrum_buffers: Support two headroom modes

There are two interfaces to configure ETS: qdiscs and DCB. Historically,
DCB ETS configuration was projected to ingress as well, and configured port
buffers. Qdisc was not.

So as not to break clients that today use DCB ETS and PFC and rely on
getting a reasonable ingress buffer priomap, keep the ETS mirroring in
effect.

Since qdiscs have not done this mirroring historically, it is reasonable
not to introduce it, but rather permit manual ingress configuration through
dcbnl_setbuffer only in the qdisc mode.

This will require a toggle to indicate whether buffer sizes should be
autocomputed or taken from dcbnl_setbuffer, and likewise for priomaps.
Introduce such and initialize it, and guard port buffer size configuration
as appropriate. The toggle is currently left in the DCB position. In a
following patch, qdisc code will switch it.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 19 insertions, 3 deletions

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c
index 68286cd70c33..37ff29a1686e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c
@@ -304,8 +304,16 @@ void mlxsw_sp_hdroom_prios_reset_buf_idx(struct mlxsw_sp_hdroom *hdroom)
 {
 	int prio;
 
-	for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; prio++)
-		hdroom->prios.prio[prio].buf_idx = hdroom->prios.prio[prio].ets_buf_idx;
+	for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; prio++) {
+		switch (hdroom->mode) {
+		case MLXSW_SP_HDROOM_MODE_DCB:
+			hdroom->prios.prio[prio].buf_idx = hdroom->prios.prio[prio].ets_buf_idx;
+			break;
+		case MLXSW_SP_HDROOM_MODE_TC:
+			hdroom->prios.prio[prio].buf_idx = hdroom->prios.prio[prio].set_buf_idx;
+			break;
+		}
+	}
 }
 
 void mlxsw_sp_hdroom_bufs_reset_lossiness(struct mlxsw_sp_hdroom *hdroom)
@@ -411,7 +419,14 @@ void mlxsw_sp_hdroom_bufs_reset_sizes(struct mlxsw_sp_port *mlxsw_sp_port,
 		delay_cells = mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, delay_cells);
 
 		buf->thres_cells = thres_cells;
-		buf->size_cells = thres_cells + delay_cells;
+		if (hdroom->mode == MLXSW_SP_HDROOM_MODE_DCB) {
+			buf->size_cells = thres_cells + delay_cells;
+		} else {
+			/* Do not allow going below the minimum size, even if
+			 * the user requested it.
+			 */
+			buf->size_cells = max(buf->set_size_cells, buf->thres_cells);
+		}
 	}
 }
 
@@ -575,6 +590,7 @@ static int mlxsw_sp_port_headroom_init(struct mlxsw_sp_port *mlxsw_sp_port)
 	int prio;
 
 	hdroom.mtu = mlxsw_sp_port->dev->mtu;
+	hdroom.mode = MLXSW_SP_HDROOM_MODE_DCB;
 	for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; prio++)
 		hdroom.prios.prio[prio].lossy = true;