Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 150 insertions, 1 deletions

diff --git a/drivers/net/ethernet/micrel/ks8851.h b/drivers/net/ethernet/micrel/ks8851.h
index 8f834aef8e32..2b319e451121 100644
--- a/drivers/net/ethernet/micrel/ks8851.h
+++ b/drivers/net/ethernet/micrel/ks8851.h
@@ -7,6 +7,11 @@
  * KS8851 register definitions
 */
 
+#ifndef __KS8851_H__
+#define __KS8851_H__
+
+#include <linux/eeprom_93cx6.h>
+
 #define KS_CCR					0x08
 #define CCR_LE					(1 << 10)   /* KSZ8851-16MLL */
 #define CCR_EEPROM				(1 << 9)
@@ -19,7 +24,7 @@
 #define CCR_32PIN				(1 << 0)    /* KSZ8851SNL    */
 
 /* MAC address registers */
-#define KS_MAR(_m)				(0x15 - (_m))
+#define KS_MAR(_m)				(0x14 - (_m))
 #define KS_MARL					0x10
 #define KS_MARM					0x12
 #define KS_MARH					0x14
@@ -300,3 +305,147 @@
 #define TXFR_TXIC				(1 << 15)
 #define TXFR_TXFID_MASK				(0x3f << 0)
 #define TXFR_TXFID_SHIFT			(0)
+
+/**
+ * struct ks8851_rxctrl - KS8851 driver rx control
+ * @mchash: Multicast hash-table data.
+ * @rxcr1: KS_RXCR1 register setting
+ * @rxcr2: KS_RXCR2 register setting
+ *
+ * Representation of the settings needs to control the receive filtering
+ * such as the multicast hash-filter and the receive register settings. This
+ * is used to make the job of working out if the receive settings change and
+ * then issuing the new settings to the worker that will send the necessary
+ * commands.
+ */
+struct ks8851_rxctrl {
+	u16	mchash[4];
+	u16	rxcr1;
+	u16	rxcr2;
+};
+
+/**
+ * union ks8851_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks8851_tx_hdr {
+	u8	txb[6];
+	__le16	txw[3];
+};
+
+/**
+ * struct ks8851_net - KS8851 driver private data
+ * @netdev: The network device we're bound to
+ * @statelock: Lock on this structure for tx list.
+ * @mii: The MII state information for the mii calls.
+ * @rxctrl: RX settings for @rxctrl_work.
+ * @rxctrl_work: Work queue for updating RX mode and multicast lists
+ * @txq: Queue of packets for transmission.
+ * @txh: Space for generating packet TX header in DMA-able data
+ * @rxd: Space for receiving SPI data, in DMA-able space.
+ * @txd: Space for transmitting SPI data, in DMA-able space.
+ * @msg_enable: The message flags controlling driver output (see ethtool).
+ * @fid: Incrementing frame id tag.
+ * @rc_ier: Cached copy of KS_IER.
+ * @rc_ccr: Cached copy of KS_CCR.
+ * @rc_rxqcr: Cached copy of KS_RXQCR.
+ * @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM.
+ * @vdd_reg:	Optional regulator supplying the chip
+ * @vdd_io: Optional digital power supply for IO
+ * @gpio: Optional reset_n gpio
+ * @lock: Bus access lock callback
+ * @unlock: Bus access unlock callback
+ * @rdreg16: 16bit register read callback
+ * @wrreg16: 16bit register write callback
+ * @rdfifo: FIFO read callback
+ * @wrfifo: FIFO write callback
+ * @start_xmit: start_xmit() implementation callback
+ * @rx_skb: rx_skb() implementation callback
+ * @flush_tx_work: flush_tx_work() implementation callback
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ * We align the buffers we may use for rx/tx to ensure that if the SPI driver
+ * wants to DMA map them, it will not have any problems with data the driver
+ * modifies.
+ */
+struct ks8851_net {
+	struct net_device	*netdev;
+	spinlock_t		statelock;
+
+	union ks8851_tx_hdr	txh ____cacheline_aligned;
+	u8			rxd[8];
+	u8			txd[8];
+
+	u32			msg_enable ____cacheline_aligned;
+	u16			tx_space;
+	u8			fid;
+
+	u16			rc_ier;
+	u16			rc_rxqcr;
+	u16			rc_ccr;
+
+	struct mii_if_info	mii;
+	struct ks8851_rxctrl	rxctrl;
+
+	struct work_struct	rxctrl_work;
+
+	struct sk_buff_head	txq;
+
+	struct eeprom_93cx6	eeprom;
+	struct regulator	*vdd_reg;
+	struct regulator	*vdd_io;
+	int			gpio;
+
+	void			(*lock)(struct ks8851_net *ks,
+					unsigned long *flags);
+	void			(*unlock)(struct ks8851_net *ks,
+					  unsigned long *flags);
+	unsigned int		(*rdreg16)(struct ks8851_net *ks,
+					   unsigned int reg);
+	void			(*wrreg16)(struct ks8851_net *ks,
+					   unsigned int reg, unsigned int val);
+	void			(*rdfifo)(struct ks8851_net *ks, u8 *buff,
+					  unsigned int len);
+	void			(*wrfifo)(struct ks8851_net *ks,
+					  struct sk_buff *txp, bool irq);
+	netdev_tx_t		(*start_xmit)(struct sk_buff *skb,
+					      struct net_device *dev);
+	void			(*rx_skb)(struct ks8851_net *ks,
+					  struct sk_buff *skb);
+	void			(*flush_tx_work)(struct ks8851_net *ks);
+};
+
+int ks8851_probe_common(struct net_device *netdev, struct device *dev,
+			int msg_en);
+int ks8851_remove_common(struct device *dev);
+int ks8851_suspend(struct device *dev);
+int ks8851_resume(struct device *dev);
+
+static __maybe_unused SIMPLE_DEV_PM_OPS(ks8851_pm_ops,
+					ks8851_suspend, ks8851_resume);
+
+/**
+ * ks8851_done_tx - update and then free skbuff after transmitting
+ * @ks: The device state
+ * @txb: The buffer transmitted
+ */
+static void __maybe_unused ks8851_done_tx(struct ks8851_net *ks,
+					  struct sk_buff *txb)
+{
+	struct net_device *dev = ks->netdev;
+
+	dev->stats.tx_bytes += txb->len;
+	dev->stats.tx_packets++;
+
+	dev_kfree_skb(txb);
+}
+
+#endif /* __KS8851_H__ */