aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/smsc/smc9194.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-13 17:40:34 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-13 17:40:34 +0900
commit42a2d923cc349583ebf6fdd52a7d35e1c2f7e6bd (patch)
tree2b2b0c03b5389c1301800119333967efafd994ca /drivers/net/ethernet/smsc/smc9194.c
parentMerge branch 'akpm' (patches from Andrew Morton) (diff)
parentMerge branch 'prandom' (diff)
downloadlinux-dev-42a2d923cc349583ebf6fdd52a7d35e1c2f7e6bd.tar.xz
linux-dev-42a2d923cc349583ebf6fdd52a7d35e1c2f7e6bd.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) The addition of nftables. No longer will we need protocol aware firewall filtering modules, it can all live in userspace. At the core of nftables is a, for lack of a better term, virtual machine that executes byte codes to inspect packet or metadata (arriving interface index, etc.) and make verdict decisions. Besides support for loading packet contents and comparing them, the interpreter supports lookups in various datastructures as fundamental operations. For example sets are supports, and therefore one could create a set of whitelist IP address entries which have ACCEPT verdicts attached to them, and use the appropriate byte codes to do such lookups. Since the interpreted code is composed in userspace, userspace can do things like optimize things before giving it to the kernel. Another major improvement is the capability of atomically updating portions of the ruleset. In the existing netfilter implementation, one has to update the entire rule set in order to make a change and this is very expensive. Userspace tools exist to create nftables rules using existing netfilter rule sets, but both kernel implementations will need to co-exist for quite some time as we transition from the old to the new stuff. Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have worked so hard on this. 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements to our pseudo-random number generator, mostly used for things like UDP port randomization and netfitler, amongst other things. In particular the taus88 generater is updated to taus113, and test cases are added. 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet and Yang Yingliang. 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin Sujir. 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet, Neal Cardwell, and Yuchung Cheng. 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary control message data, much like other socket option attributes. From Francesco Fusco. 7) Allow applications to specify a cap on the rate computed automatically by the kernel for pacing flows, via a new SO_MAX_PACING_RATE socket option. From Eric Dumazet. 8) Make the initial autotuned send buffer sizing in TCP more closely reflect actual needs, from Eric Dumazet. 9) Currently early socket demux only happens for TCP sockets, but we can do it for connected UDP sockets too. Implementation from Shawn Bohrer. 10) Refactor inet socket demux with the goal of improving hash demux performance for listening sockets. With the main goals being able to use RCU lookups on even request sockets, and eliminating the listening lock contention. From Eric Dumazet. 11) The bonding layer has many demuxes in it's fast path, and an RCU conversion was started back in 3.11, several changes here extend the RCU usage to even more locations. From Ding Tianhong and Wang Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav Falico. 12) Allow stackability of segmentation offloads to, in particular, allow segmentation offloading over tunnels. From Eric Dumazet. 13) Significantly improve the handling of secret keys we input into the various hash functions in the inet hashtables, TCP fast open, as well as syncookies. From Hannes Frederic Sowa. The key fundamental operation is "net_get_random_once()" which uses static keys. Hannes even extended this to ipv4/ipv6 fragmentation handling and our generic flow dissector. 14) The generic driver layer takes care now to set the driver data to NULL on device removal, so it's no longer necessary for drivers to explicitly set it to NULL any more. Many drivers have been cleaned up in this way, from Jingoo Han. 15) Add a BPF based packet scheduler classifier, from Daniel Borkmann. 16) Improve CRC32 interfaces and generic SKB checksum iterators so that SCTP's checksumming can more cleanly be handled. Also from Daniel Borkmann. 17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces using the interface MTU value. This helps avoid PMTU attacks, particularly on DNS servers. From Hannes Frederic Sowa. 18) Use generic XPS for transmit queue steering rather than internal (re-)implementation in virtio-net. From Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) random32: add test cases for taus113 implementation random32: upgrade taus88 generator to taus113 from errata paper random32: move rnd_state to linux/random.h random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized random32: add periodic reseeding random32: fix off-by-one in seeding requirement PHY: Add RTL8201CP phy_driver to realtek xtsonic: add missing platform_set_drvdata() in xtsonic_probe() macmace: add missing platform_set_drvdata() in mace_probe() ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe() ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh vlan: Implement vlan_dev_get_egress_qos_mask as an inline. ixgbe: add warning when max_vfs is out of range. igb: Update link modes display in ethtool netfilter: push reasm skb through instead of original frag skbs ip6_output: fragment outgoing reassembled skb properly MAINTAINERS: mv643xx_eth: take over maintainership from Lennart net_sched: tbf: support of 64bit rates ixgbe: deleting dfwd stations out of order can cause null ptr deref ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS ...
Diffstat (limited to 'drivers/net/ethernet/smsc/smc9194.c')
-rw-r--r--drivers/net/ethernet/smsc/smc9194.c56
1 files changed, 26 insertions, 30 deletions
diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index afd9873e9bdb..67d9fdeedd86 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -55,7 +55,7 @@
----------------------------------------------------------------------------*/
static const char version[] =
- "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
+ "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
#include <linux/module.h>
#include <linux/kernel.h>
@@ -597,7 +597,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
packet_no = inb( ioaddr + PNR_ARR + 1 );
if ( packet_no & 0x80 ) {
/* or isn't there? BAD CHIP! */
- printk(KERN_DEBUG CARDNAME": Memory allocation failed.\n");
+ netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
dev_kfree_skb_any(skb);
lp->saved_skb = NULL;
netif_wake_queue(dev);
@@ -610,7 +610,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
/* point to the beginning of the packet */
outw( PTR_AUTOINC , ioaddr + POINTER );
- PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
+ PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length));
#if SMC_DEBUG > 2
print_packet( buf, length );
#endif
@@ -846,7 +846,6 @@ static const struct net_device_ops smc_netdev_ops = {
static int __init smc_probe(struct net_device *dev, int ioaddr)
{
int i, memory, retval;
- static unsigned version_printed;
unsigned int bank;
const char *version_string;
@@ -913,8 +912,7 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
It might be prudent to check a listing of MAC addresses
against the hardware address, or do some other tests. */
- if (version_printed++ == 0)
- printk("%s", version);
+ pr_info_once("%s\n", version);
/* fill in some of the fields */
dev->base_addr = ioaddr;
@@ -1003,21 +1001,21 @@ static int __init smc_probe(struct net_device *dev, int ioaddr)
/* now, print out the card info, in a short format.. */
- printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
- version_string, revision_register & 0xF, ioaddr, dev->irq,
- if_string, memory );
+ netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ",
+ version_string, revision_register & 0xF, ioaddr, dev->irq,
+ if_string, memory);
/*
. Print the Ethernet address
*/
- printk("ADDR: %pM\n", dev->dev_addr);
+ netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
/* Grab the IRQ */
- retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
- if (retval) {
- printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
- dev->irq, retval);
- goto err_out;
- }
+ retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
+ if (retval) {
+ netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
+ DRV_NAME, dev->irq, retval);
+ goto err_out;
+ }
dev->netdev_ops = &smc_netdev_ops;
dev->watchdog_timeo = HZ/20;
@@ -1037,30 +1035,32 @@ static void print_packet( byte * buf, int length )
int remainder;
int lines;
- printk("Packet of length %d\n", length);
+ pr_dbg("Packet of length %d\n", length);
lines = length / 16;
remainder = length % 16;
for ( i = 0; i < lines ; i ++ ) {
int cur;
+ printk(KERN_DEBUG);
for ( cur = 0; cur < 8; cur ++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
- printk("%02x%02x ", a, b );
+ pr_cont("%02x%02x ", a, b);
}
- printk("\n");
+ pr_cont("\n");
}
+ printk(KERN_DEBUG);
for ( i = 0; i < remainder/2 ; i++ ) {
byte a, b;
a = *(buf ++ );
b = *(buf ++ );
- printk("%02x%02x ", a, b );
+ pr_cont("%02x%02x ", a, b);
}
- printk("\n");
+ pr_cont("\n");
#endif
}
#endif
@@ -1127,9 +1127,8 @@ static void smc_timeout(struct net_device *dev)
{
/* If we get here, some higher level has decided we are broken.
There should really be a "kick me" function call instead. */
- printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
- tx_done(dev) ? "IRQ conflict" :
- "network cable problem");
+ netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
+ tx_done(dev) ? "IRQ conflict" : "network cable problem");
/* "kick" the adaptor */
smc_reset( dev->base_addr );
smc_enable( dev->base_addr );
@@ -1299,8 +1298,7 @@ static void smc_tx( struct net_device * dev )
dev->stats.tx_errors++;
if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
if ( tx_status & TS_LATCOL ) {
- printk(KERN_DEBUG CARDNAME
- ": Late collision occurred on last xmit.\n");
+ netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n");
dev->stats.tx_window_errors++;
}
#if 0
@@ -1308,7 +1306,7 @@ static void smc_tx( struct net_device * dev )
#endif
if ( tx_status & TS_SUCCESS ) {
- printk(CARDNAME": Successful packet caused interrupt\n");
+ netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
}
/* re-enable transmit */
SMC_SELECT_BANK( 0 );
@@ -1547,9 +1545,7 @@ int __init init_module(void)
/* copy the parameters from insmod into the device structure */
devSMC9194 = smc_init(-1);
- if (IS_ERR(devSMC9194))
- return PTR_ERR(devSMC9194);
- return 0;
+ return PTR_ERR_OR_ZERO(devSMC9194);
}
void __exit cleanup_module(void)