diff options
| author |   Niklas Cassel <niklas.cassel@axis.com> | 2016-12-07 15:20:07 +0100 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2016-12-08 13:07:10 -0500 |
| commit | 89caaa2d80b7bf9bd8632cd3137254f8c685e5db (patch) | |
| tree | 214c26ccdb8a9a5bb8f289ea6747e41944594d44 /drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | |
| parent | net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK (diff) | |
| download | linux-dev-89caaa2d80b7bf9bd8632cd3137254f8c685e5db.tar.xz linux-dev-89caaa2d80b7bf9bd8632cd3137254f8c685e5db.zip | |
net: stmmac: add support for independent DMA pbl for tx/rx
GMAC and newer supports independent programmable burst lengths for
DMA tx/rx. Add new optional devicetree properties representing this.
To be backwards compatible, snps,pbl will still be valid, but
snps,txpbl/snps,rxpbl will override the value in snps,pbl if set.
If the IP is synthesized to use the AXI interface, there is a register
and a matching DT property inside the optional stmmac-axi-config DT node
for controlling burst lengths, named snps,blen.
However, using this register, it is not possible to control tx and rx
independently. Also, this register is not available if the IP was
synthesized with, e.g., the AHB interface.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 318ae9f10104..99b8040af592 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -89,20 +89,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, u32 dma_tx, u32 dma_rx, int atds) { u32 value = readl(ioaddr + DMA_BUS_MODE); + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; /* * Set the DMA PBL (Programmable Burst Length) mode. * * Note: before stmmac core 3.50 this mode bit was 4xPBL, and * post 3.5 mode bit acts as 8*PBL. - * - * This configuration doesn't take care about the Separate PBL - * so only the bits: 13-8 are programmed with the PBL passed from the - * platform. */ value |= DMA_BUS_MODE_MAXPBL; - value &= ~DMA_BUS_MODE_PBL_MASK; - value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT); + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); /* Set the Fixed burst mode */ if (dma_cfg->fixed_burst) |