diff options
| author |   Auke Kok <auke-jan.h.kok@intel.com> | 2007-10-31 15:22:10 -0700 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2008-01-28 15:03:44 -0800 |
| commit | 3957d63da0067ad6a7dc8261b7eeb824f9dc42b4 (patch) | |
| tree | 6566a29315969cb531f204d3a5c4ebcb8a1fc311 /drivers/net/ixgbe/ixgbe_common.c | |
| parent | e1000/e1000e: Move PCI-Express device IDs over to e1000e (diff) | |
| download | linux-dev-3957d63da0067ad6a7dc8261b7eeb824f9dc42b4.tar.xz linux-dev-3957d63da0067ad6a7dc8261b7eeb824f9dc42b4.zip | |
ixgbe: Fix copper PHY initialization code
While cleaning up the internal API focussing on Fiber and CX4 code
we found that I had broken the copper PHY initialization code. This
patch restores the PHY-specific code. This is mostly uninteresting
since no copper PHY boards are yet available. The changes have been
tested against Fiber only as I do not even have copper PHY versions
of 82598 macs.
This change actually cleans up the API code a bit more and we
lose some initialization code. A few PHY link detection helper
lines of code have been snuck into this patch, as well as a
read flush where it was suspected that this might cause issues.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 512e3b22ed08..9c10c0584edf 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -74,7 +74,7 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw) ixgbe_clear_vfta(hw); /* Set up link */ - hw->phy.ops.setup(hw); + hw->mac.ops.setup_link(hw); /* Clear statistics registers */ ixgbe_clear_hw_cntrs(hw); @@ -83,6 +83,7 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw) ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + IXGBE_WRITE_FLUSH(hw); /* Clear adapter stopped flag */ hw->adapter_stopped = false; @@ -297,6 +298,7 @@ s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) led_reg &= ~IXGBE_LED_MODE_MASK(index); led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); return 0; } @@ -314,6 +316,7 @@ s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) led_reg &= ~IXGBE_LED_MODE_MASK(index); led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); return 0; } @@ -496,6 +499,7 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + IXGBE_WRITE_FLUSH(hw); } /** @@ -1132,7 +1136,7 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) } /** - * ixgbe_read_analog_reg8- Reads 8 bit 82598 Atlas analog register + * ixgbe_read_analog_reg8 - Reads 8 bit Atlas analog register * @hw: pointer to hardware structure * @reg: analog register to read * @val: read value @@ -1154,7 +1158,7 @@ s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) } /** - * ixgbe_write_analog_reg8- Writes 8 bit Atlas analog register + * ixgbe_write_analog_reg8 - Writes 8 bit Atlas analog register * @hw: pointer to hardware structure * @reg: atlas register to write * @val: value to write |