diff options
| author |   Mark Brown <broonie@sirena.org.uk> | 2007-02-19 20:15:40 +0000 |
|---|---|---|
| committer |   Jeff Garzik <jeff@garzik.org> | 2007-02-20 11:18:13 -0500 |
| commit | 6aab44475a1355365f0a24abe6f8eb32185a701e (patch) | |
| tree | 084fab50438559617142445b80059d901fc81cb8 /drivers/net/natsemi.c | |
| parent | natsemi: Add support for using MII port with no PHY (diff) | |
| download | linux-dev-6aab44475a1355365f0a24abe6f8eb32185a701e.tar.xz linux-dev-6aab44475a1355365f0a24abe6f8eb32185a701e.zip | |
natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII<->MII connection with no
PHY. This patch adds a new device table entry supporting these cards.
Signed-Off-By: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/natsemi.c')
| -rw-r--r-- | drivers/net/natsemi.c | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 4e21f5510b90..adf29dd66798 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -244,6 +244,9 @@ enum { MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */ }; +enum { + NATSEMI_FLAG_IGNORE_PHY = 0x1, +}; /* array of board data directly indexed by pci_tbl[x].driver_data */ static const struct { @@ -251,10 +254,12 @@ static const struct { unsigned long flags; unsigned int eeprom_size; } natsemi_pci_info[] __devinitdata = { + { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 }, { "NatSemi DP8381[56]", 0, 24 }, }; static const struct pci_device_id natsemi_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_NS, 0x0020, 0x12d9, 0x000c, 0, 0, 0 }, { PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { } /* terminate list */ }; @@ -811,7 +816,10 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, np->hands_off = 0; np->intr_status = 0; np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size; - np->ignore_phy = 0; + if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY) + np->ignore_phy = 1; + else + np->ignore_phy = 0; /* Initial port: * - If configured to ignore the PHY set up for external. |