diff options
| author |   Dominik Brodowski <linux@dominikbrodowski.net> | 2010-07-24 17:23:51 +0200 |
|---|---|---|
| committer | Dominik Brodowski <linux@dominikbrodowski.net> | 2010-08-03 09:04:11 +0200 |
| commit | 90abdc3b973229bae98dd96649d9f7106cc177a4 (patch) | |
| tree | 5c1a7a131b65560dd73b5103118d8c7631bd76a4 /drivers/net/pcmcia/3c589_cs.c | |
| parent | pcmcia: do not use io_req_t after call to pcmcia_request_io() (diff) | |
| download | linux-dev-90abdc3b973229bae98dd96649d9f7106cc177a4.tar.xz linux-dev-90abdc3b973229bae98dd96649d9f7106cc177a4.zip | |
pcmcia: do not use io_req_t when calling pcmcia_request_io()
Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/pcmcia/3c589_cs.c')
| -rw-r--r-- | drivers/net/pcmcia/3c589_cs.c | 11 |
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 122ef4a9488c..61f9cf2100ff 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link) "3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); + link->io_lines = 16; + /* For the 3c562, the base address must be xx00-xx7f */ - link->io.IOAddrLines = 16; for (i = j = 0; j < 0x400; j += 0x10) { if (multi && (j & 0x80)) continue; - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } |