net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-lib

Add 'struct bcm_ptp_private' to bcm54xx_phy_priv which points to
an optional PTP structure attached to the PHY.  This is allocated
on probe if PHY PTP support is configured, and if the driver supports
PTP for the specified PHY.

Add the bcm_ptp_probe(), bcm_ptp_config_init() and bcn_ptp_stop()
API functions to the bcm-phy library.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 29 insertions, 4 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index e36809aa6d30..876bc45ede60 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -27,6 +27,11 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
+struct bcm54xx_phy_priv {
+	u64	*stats;
+	struct bcm_ptp_private *ptp;
+};
+
 static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 {
 	int rc, val;
@@ -313,6 +318,22 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 		bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
 }
 
+static void bcm54xx_ptp_stop(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	if (priv->ptp)
+		bcm_ptp_stop(priv->ptp);
+}
+
+static void bcm54xx_ptp_config_init(struct phy_device *phydev)
+{
+	struct bcm54xx_phy_priv *priv = phydev->priv;
+
+	if (priv->ptp)
+		bcm_ptp_config_init(phydev);
+}
+
 static int bcm54xx_config_init(struct phy_device *phydev)
 {
 	int reg, err, val;
@@ -390,6 +411,8 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 		bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
 	}
 
+	bcm54xx_ptp_config_init(phydev);
+
 	return 0;
 }
 
@@ -418,6 +441,8 @@ static int bcm54xx_suspend(struct phy_device *phydev)
 {
 	int ret;
 
+	bcm54xx_ptp_stop(phydev);
+
 	/* We cannot use a read/modify/write here otherwise the PHY gets into
 	 * a bad state where its LEDs keep flashing, thus defeating the purpose
 	 * of low power mode.
@@ -741,10 +766,6 @@ static irqreturn_t brcm_fet_handle_interrupt(struct phy_device *phydev)
 	return IRQ_HANDLED;
 }
 
-struct bcm54xx_phy_priv {
-	u64	*stats;
-};
-
 static int bcm54xx_phy_probe(struct phy_device *phydev)
 {
 	struct bcm54xx_phy_priv *priv;
@@ -761,6 +782,10 @@ static int bcm54xx_phy_probe(struct phy_device *phydev)
 	if (!priv->stats)
 		return -ENOMEM;
 
+	priv->ptp = bcm_ptp_probe(phydev);
+	if (IS_ERR(priv->ptp))
+		return PTR_ERR(priv->ptp);
+
 	return 0;
 }