diff options
| author |   Maxime Chevallier <maxime.chevallier@bootlin.com> | 2019-02-11 15:25:29 +0100 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2019-02-13 19:17:53 -0500 |
| commit | 7fd8afa8933a095a97995885740999f174e61b60 (patch) | |
| tree | 455338f2966ed5d607042406f4990b2038a09662 /drivers/net/phy/phy-c45.c | |
| parent | net: phy: Extract genphy_c45_pma_read_abilities from marvell10g (diff) | |
| download | linux-dev-7fd8afa8933a095a97995885740999f174e61b60.tar.xz linux-dev-7fd8afa8933a095a97995885740999f174e61b60.zip | |
net: phy: Add generic support for 2.5GBaseT and 5GBaseT
The 802.3bz specification, based on previous by the NBASET alliance,
defines the 2.5GBaseT and 5GBaseT link modes for ethernet traffic on
cat5e, cat6 and cat7 cables.
These mode integrate with the already defined C45 MDIO PMA/PMD registers
set that added 10G support, by defining some previously reserved bits,
and adding a new register (2.5G/5G Extended abilities).
This commit adds the required definitions in include/uapi/linux/mdio.h
to support these modes, and detect when a link-partner advertises them.
It also adds support for these mode in the generic C45 PHY
infrastructure.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/phy-c45.c')
| -rw-r--r-- | drivers/net/phy/phy-c45.c | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 6f028de4dae1..7af5fa81daf6 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -47,6 +47,16 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev) /* Assume 1000base-T */ ctrl2 |= MDIO_PMA_CTRL2_1000BT; break; + case SPEED_2500: + ctrl1 |= MDIO_CTRL1_SPEED2_5G; + /* Assume 2.5Gbase-T */ + ctrl2 |= MDIO_PMA_CTRL2_2_5GBT; + break; + case SPEED_5000: + ctrl1 |= MDIO_CTRL1_SPEED5G; + /* Assume 5Gbase-T */ + ctrl2 |= MDIO_PMA_CTRL2_5GBT; + break; case SPEED_10000: ctrl1 |= MDIO_CTRL1_SPEED10G; /* Assume 10Gbase-T */ @@ -194,6 +204,12 @@ int genphy_c45_read_lpa(struct phy_device *phydev) if (val < 0) return val; + if (val & MDIO_AN_10GBT_STAT_LP2_5G) + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->lp_advertising); + if (val & MDIO_AN_10GBT_STAT_LP5G) + linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->lp_advertising); if (val & MDIO_AN_10GBT_STAT_LP10G) linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->lp_advertising); @@ -224,6 +240,12 @@ int genphy_c45_read_pma(struct phy_device *phydev) case MDIO_PMA_CTRL1_SPEED1000: phydev->speed = SPEED_1000; break; + case MDIO_CTRL1_SPEED2_5G: + phydev->speed = SPEED_2500; + break; + case MDIO_CTRL1_SPEED5G: + phydev->speed = SPEED_5000; + break; case MDIO_CTRL1_SPEED10G: phydev->speed = SPEED_10000; break; @@ -339,6 +361,21 @@ int genphy_c45_pma_read_abilities(struct phy_device *phydev) linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10BT); + + if (val & MDIO_PMA_EXTABLE_NBT) { + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, + MDIO_PMA_NG_EXTABLE); + if (val < 0) + return val; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->supported, + val & MDIO_PMA_NG_EXTABLE_2_5GBT); + + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->supported, + val & MDIO_PMA_NG_EXTABLE_5GBT); + } } return 0; |