aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorDavid Daney <ddaney@caviumnetworks.com>2009-10-14 12:04:38 -0700
committerRalf Baechle <ralf@linux-mips.org>2009-12-17 01:56:58 +0000
commit25d967b72a92d72b6e0263a0337dfc940bd6c044 (patch)
tree97900b2e687d8d868bd61ba7bc9d3acd3ce8b11a /drivers/net/phy
parentMIPS: Octeon: Add platform device for MDIO buses. (diff)
downloadlinux-dev-25d967b72a92d72b6e0263a0337dfc940bd6c044.tar.xz
linux-dev-25d967b72a92d72b6e0263a0337dfc940bd6c044.zip
NET: Add driver for Octeon MDIO buses.
The Octeon SOC has two types of Ethernet ports, each type with its own driver. However, the PHYs for all the ports are controlled by a common MDIO bus. Because the mdio driver is not associated with a particular driver, but is instead a system level resource, we create s stand-alone driver for it. As for the driver, we put the register definitions in arch/mips/include/asm/octeon where most of the other Octeon register definitions live. This is a platform driver with the platform device for "mdio-octeon" being registered in the platform startup code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig11
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/mdio-octeon.c180
3 files changed, 192 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d5d8e1c5bc91..fc5938ba3d78 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -115,4 +115,15 @@ config MDIO_GPIO
To compile this driver as a module, choose M here: the module
will be called mdio-gpio.
+config MDIO_OCTEON
+ tristate "Support for MDIO buses on Octeon SOCs"
+ depends on CPU_CAVIUM_OCTEON
+ default y
+ help
+
+ This module provides a driver for the Octeon MDIO busses.
+ It is required by the Octeon Ethernet device drivers.
+
+ If in doubt, say Y.
+
endif # PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index edfaac48cbd5..1342585af381 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
+obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
new file mode 100644
index 000000000000..61a4461cbda5
--- /dev/null
+++ b/drivers/net/phy/mdio-octeon.c
@@ -0,0 +1,180 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-smix-defs.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver"
+
+struct octeon_mdiobus {
+ struct mii_bus *mii_bus;
+ int unit;
+ int phy_irq[PHY_MAX_ADDR];
+};
+
+static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct octeon_mdiobus *p = bus->priv;
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_rd_dat smi_rd;
+ int timeout = 1000;
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+
+ do {
+ /*
+ * Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ cvmx_wait(1000);
+ smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit));
+ } while (smi_rd.s.pending && --timeout);
+
+ if (smi_rd.s.val)
+ return smi_rd.s.dat;
+ else
+ return -EIO;
+}
+
+static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ struct octeon_mdiobus *p = bus->priv;
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = val;
+ cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+
+ do {
+ /*
+ * Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ cvmx_wait(1000);
+ smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit));
+ } while (smi_wr.s.pending && --timeout);
+
+ if (timeout <= 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int __init octeon_mdiobus_probe(struct platform_device *pdev)
+{
+ struct octeon_mdiobus *bus;
+ int i;
+ int err = -ENOENT;
+
+ bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+
+ /* The platform_device id is our unit number. */
+ bus->unit = pdev->id;
+
+ bus->mii_bus = mdiobus_alloc();
+
+ if (!bus->mii_bus)
+ goto err;
+
+ /*
+ * Standard Octeon evaluation boards don't support phy
+ * interrupts, we need to poll.
+ */
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bus->phy_irq[i] = PHY_POLL;
+
+ bus->mii_bus->priv = bus;
+ bus->mii_bus->irq = bus->phy_irq;
+ bus->mii_bus->name = "mdio-octeon";
+ snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%x", bus->unit);
+ bus->mii_bus->parent = &pdev->dev;
+
+ bus->mii_bus->read = octeon_mdiobus_read;
+ bus->mii_bus->write = octeon_mdiobus_write;
+
+ dev_set_drvdata(&pdev->dev, bus);
+
+ err = mdiobus_register(bus->mii_bus);
+ if (err)
+ goto err_register;
+
+ dev_info(&pdev->dev, "Version " DRV_VERSION "\n");
+
+ return 0;
+err_register:
+ mdiobus_free(bus->mii_bus);
+
+err:
+ devm_kfree(&pdev->dev, bus);
+ return err;
+}
+
+static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
+{
+ struct octeon_mdiobus *bus;
+
+ bus = dev_get_drvdata(&pdev->dev);
+
+ mdiobus_unregister(bus->mii_bus);
+ mdiobus_free(bus->mii_bus);
+ return 0;
+}
+
+static struct platform_driver octeon_mdiobus_driver = {
+ .driver = {
+ .name = "mdio-octeon",
+ .owner = THIS_MODULE,
+ },
+ .probe = octeon_mdiobus_probe,
+ .remove = __exit_p(octeon_mdiobus_remove),
+};
+
+void octeon_mdiobus_force_mod_depencency(void)
+{
+ /* Let ethernet drivers force us to be loaded. */
+}
+EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency);
+
+static int __init octeon_mdiobus_mod_init(void)
+{
+ return platform_driver_register(&octeon_mdiobus_driver);
+}
+
+static void __exit octeon_mdiobus_mod_exit(void)
+{
+ platform_driver_unregister(&octeon_mdiobus_driver);
+}
+
+module_init(octeon_mdiobus_mod_init);
+module_exit(octeon_mdiobus_mod_exit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");