aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2019-08-19 11:54:03 -0700
committerDavid S. Miller <davem@davemloft.net>2019-08-19 11:54:03 -0700
commit446bf64b613c4433dac4b15f4eaf326beaad3c8e (patch)
treeb20b9457234f6f9a5d7464213ef6d10f95f3eed3 /drivers/net/phy
parentnet: hns: add phy_attached_info() to the hns driver (diff)
parentMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net (diff)
downloadlinux-dev-446bf64b613c4433dac4b15f4eaf326beaad3c8e.tar.xz
linux-dev-446bf64b613c4433dac4b15f4eaf326beaad3c8e.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/at803x.c32
-rw-r--r--drivers/net/phy/phy-c45.c14
-rw-r--r--drivers/net/phy/phy_device.c12
3 files changed, 33 insertions, 25 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d98aa56710a9..2aa7b2e60046 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -253,36 +253,20 @@ static int at803x_config_init(struct phy_device *phydev)
* after HW reset: RX delay enabled and TX delay disabled
* after SW reset: RX delay enabled, while TX delay retains the
* value before reset.
- *
- * So let's first disable the RX and TX delays in PHY and enable
- * them based on the mode selected (this also takes care of RGMII
- * mode where we expect delays to be disabled)
*/
-
- ret = at803x_disable_rx_delay(phydev);
- if (ret < 0)
- return ret;
- ret = at803x_disable_tx_delay(phydev);
- if (ret < 0)
- return ret;
-
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
- /* If RGMII_ID or RGMII_RXID are specified enable RX delay,
- * otherwise keep it disabled
- */
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
ret = at803x_enable_rx_delay(phydev);
- if (ret < 0)
- return ret;
- }
+ else
+ ret = at803x_disable_rx_delay(phydev);
+ if (ret < 0)
+ return ret;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
- /* If RGMII_ID or RGMII_TXID are specified enable TX delay,
- * otherwise keep it disabled
- */
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
ret = at803x_enable_tx_delay(phydev);
- }
+ else
+ ret = at803x_disable_tx_delay(phydev);
return ret;
}
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index b9d4145781ca..58bb25e4af10 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -219,6 +219,20 @@ int genphy_c45_read_link(struct phy_device *phydev)
int val, devad;
bool link = true;
+ if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+ if (val < 0)
+ return val;
+
+ /* Autoneg is being started, therefore disregard current
+ * link status and report link as down.
+ */
+ if (val & MDIO_AN_CTRL1_RESTART) {
+ phydev->link = 0;
+ return 0;
+ }
+ }
+
while (mmd_mask && link) {
devad = __ffs(mmd_mask);
mmd_mask &= ~BIT(devad);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d5db7604d7c4..d347ddcac45b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1741,7 +1741,17 @@ EXPORT_SYMBOL(genphy_aneg_done);
*/
int genphy_update_link(struct phy_device *phydev)
{
- int status;
+ int status = 0, bmcr;
+
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ /* Autoneg is being started, therefore disregard BMSR value and
+ * report link as down.
+ */
+ if (bmcr & BMCR_ANRESTART)
+ goto done;
/* The link state is latched low so that momentary link
* drops can be detected. Do not double-read the status