aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/seeq8005.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2007-10-03 17:41:50 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:51:16 -0700
commit09f75cd7bf13720738e6a196cc0107ce9a5bd5a0 (patch)
tree4c85b0b395abe7f88c87162fc22570e5de255cb1 /drivers/net/seeq8005.c
parentdrivers/net/: all drivers/net/ cleanup with ARRAY_SIZE (diff)
downloadlinux-dev-09f75cd7bf13720738e6a196cc0107ce9a5bd5a0.tar.xz
linux-dev-09f75cd7bf13720738e6a196cc0107ce9a5bd5a0.zip
[NET] drivers/net: statistics cleanup #1 -- save memory and shrink code
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/seeq8005.c')
-rw-r--r--drivers/net/seeq8005.c33
1 files changed, 10 insertions, 23 deletions
diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 4bce7c4f373c..8ef94028cba5 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -67,7 +67,6 @@ static unsigned int net_debug = NET_DEBUG;
/* Information that need to be kept for each board. */
struct net_local {
- struct net_device_stats stats;
unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */
long open_time; /* Useless example local info. */
};
@@ -86,7 +85,6 @@ static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t seeq8005_interrupt(int irq, void *dev_id);
static void seeq8005_rx(struct net_device *dev);
static int seeq8005_close(struct net_device *dev);
-static struct net_device_stats *seeq8005_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
/* Example routines you must write ;->. */
@@ -338,7 +336,6 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
dev->hard_start_xmit = seeq8005_send_packet;
dev->tx_timeout = seeq8005_timeout;
dev->watchdog_timeo = HZ/20;
- dev->get_stats = seeq8005_get_stats;
dev->set_multicast_list = set_multicast_list;
dev->flags &= ~IFF_MULTICAST;
@@ -391,7 +388,6 @@ static void seeq8005_timeout(struct net_device *dev)
static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
{
- struct net_local *lp = netdev_priv(dev);
short length = skb->len;
unsigned char *buf;
@@ -407,7 +403,7 @@ static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
hardware_send_packet(dev, buf, length);
dev->trans_start = jiffies;
- lp->stats.tx_bytes += length;
+ dev->stats.tx_bytes += length;
dev_kfree_skb (skb);
/* You might need to clean up and record Tx statistics here. */
@@ -463,7 +459,7 @@ static irqreturn_t seeq8005_interrupt(int irq, void *dev_id)
if (status & SEEQSTAT_TX_INT) {
handled = 1;
outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
- lp->stats.tx_packets++;
+ dev->stats.tx_packets++;
netif_wake_queue(dev); /* Inform upper layers. */
}
if (status & SEEQSTAT_RX_INT) {
@@ -531,11 +527,11 @@ static void seeq8005_rx(struct net_device *dev)
}
if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */
- lp->stats.rx_errors++;
- if (pkt_hdr & SEEQPKTS_SHORT) lp->stats.rx_frame_errors++;
- if (pkt_hdr & SEEQPKTS_DRIB) lp->stats.rx_frame_errors++;
- if (pkt_hdr & SEEQPKTS_OVERSIZE) lp->stats.rx_over_errors++;
- if (pkt_hdr & SEEQPKTS_CRC_ERR) lp->stats.rx_crc_errors++;
+ dev->stats.rx_errors++;
+ if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++;
+ if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++;
+ if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++;
+ if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++;
/* skip over this packet */
outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA);
@@ -547,7 +543,7 @@ static void seeq8005_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len);
if (skb == NULL) {
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- lp->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
break;
}
skb_reserve(skb, 2); /* align data on 16 byte */
@@ -567,8 +563,8 @@ static void seeq8005_rx(struct net_device *dev)
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
}
} while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN));
@@ -599,15 +595,6 @@ static int seeq8005_close(struct net_device *dev)
}
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *seeq8005_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- return &lp->stats;
-}
-
/* Set or clear the multicast filter for this adaptor.
num_addrs == -1 Promiscuous mode, receive all packets
num_addrs == 0 Normal mode, clear multicast list