stmmac: rework normal and enhanced descriptors

Currently the driver assumes that the mac10/100 can only use the
normal descriptor structure and the gmac can only use the
enhanced structures.
This patch removes the descriptor's code from the dma files
and adds two new files just for handling the normal and enhanced
descriptors.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 13 insertions, 14 deletions

diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/stmmac/dwmac1000_core.c
index f9c7c1cbda93..0aa89ae9b8e9 100644
--- a/drivers/net/stmmac/dwmac1000_core.c
+++ b/drivers/net/stmmac/dwmac1000_core.c
@@ -83,8 +83,8 @@ static void dwmac1000_set_filter(struct net_device *dev)
 	unsigned long ioaddr = dev->base_addr;
 	unsigned int value = 0;
 
-	DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
-	    __func__, netdev_mc_count(dev), netdev_uc_count(dev));
+	CHIP_DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
+		 __func__, netdev_mc_count(dev), netdev_uc_count(dev));
 
 	if (dev->flags & IFF_PROMISC)
 		value = GMAC_FRAME_FILTER_PR;
@@ -136,7 +136,7 @@ static void dwmac1000_set_filter(struct net_device *dev)
 #endif
 	writel(value, ioaddr + GMAC_FRAME_FILTER);
 
-	DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
+	CHIP_DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
 	    "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
 	    readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
 
@@ -148,18 +148,18 @@ static void dwmac1000_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
 {
 	unsigned int flow = 0;
 
-	DBG(KERN_DEBUG "GMAC Flow-Control:\n");
+	CHIP_DBG(KERN_DEBUG "GMAC Flow-Control:\n");
 	if (fc & FLOW_RX) {
-		DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
+		CHIP_DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
 		flow |= GMAC_FLOW_CTRL_RFE;
 	}
 	if (fc & FLOW_TX) {
-		DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
+		CHIP_DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
 		flow |= GMAC_FLOW_CTRL_TFE;
 	}
 
 	if (duplex) {
-		DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
+		CHIP_DBG(KERN_DEBUG "\tduplex mode: PAUSE %d\n", pause_time);
 		flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
 	}
 
@@ -172,10 +172,10 @@ static void dwmac1000_pmt(unsigned long ioaddr, unsigned long mode)
 	unsigned int pmt = 0;
 
 	if (mode == WAKE_MAGIC) {
-		DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
+		CHIP_DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
 		pmt |= power_down | magic_pkt_en;
 	} else if (mode == WAKE_UCAST) {
-		DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
+		CHIP_DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
 		pmt |= global_unicast;
 	}
 
@@ -190,16 +190,16 @@ static void dwmac1000_irq_status(unsigned long ioaddr)
 
 	/* Not used events (e.g. MMC interrupts) are not handled. */
 	if ((intr_status & mmc_tx_irq))
-		DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+		CHIP_DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_TX_INTR));
 	if (unlikely(intr_status & mmc_rx_irq))
-		DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+		CHIP_DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_RX_INTR));
 	if (unlikely(intr_status & mmc_rx_csum_offload_irq))
-		DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+		CHIP_DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
 		    readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
 	if (unlikely(intr_status & pmt_irq)) {
-		DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+		CHIP_DBG(KERN_DEBUG "GMAC: received Magic frame\n");
 		/* clear the PMT bits 5 and 6 by reading the PMT
 		 * status register. */
 		readl(ioaddr + GMAC_PMT);
@@ -230,7 +230,6 @@ struct mac_device_info *dwmac1000_setup(unsigned long ioaddr)
 	mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
 
 	mac->mac = &dwmac1000_ops;
-	mac->desc = &dwmac1000_desc_ops;
 	mac->dma = &dwmac1000_dma_ops;
 
 	mac->pmt = PMT_SUPPORTED;