vxge: Pass correct number of VFs value to pci_sriov_enable().

-  max_config_dev loadable parameter is set to 0xFF by default. Pass correct
   number of VFs value to pci_sriov_enable() if max_config_dev is set to its 
   default value.
 
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 54 insertions, 10 deletions

diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index eceb6922c809..f7482eb9c669 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -3965,6 +3965,36 @@ static void vxge_io_resume(struct pci_dev *pdev)
 	netif_device_attach(netdev);
 }
 
+static inline u32 vxge_get_num_vfs(u64 function_mode)
+{
+	u32 num_functions = 0;
+
+	switch (function_mode) {
+	case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
+	case VXGE_HW_FUNCTION_MODE_SRIOV_8:
+		num_functions = 8;
+		break;
+	case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
+		num_functions = 1;
+		break;
+	case VXGE_HW_FUNCTION_MODE_SRIOV:
+	case VXGE_HW_FUNCTION_MODE_MRIOV:
+	case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17:
+		num_functions = 17;
+		break;
+	case VXGE_HW_FUNCTION_MODE_SRIOV_4:
+		num_functions = 4;
+		break;
+	case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2:
+		num_functions = 2;
+		break;
+	case VXGE_HW_FUNCTION_MODE_MRIOV_8:
+		num_functions = 8; /* TODO */
+		break;
+	}
+	return num_functions;
+}
+
 /**
  * vxge_probe
  * @pdev : structure containing the PCI related information of the device.
@@ -3992,14 +4022,19 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 	u8 *macaddr;
 	struct vxge_mac_addrs *entry;
 	static int bus = -1, device = -1;
+	u32 host_type;
 	u8 new_device = 0;
+	enum vxge_hw_status is_privileged;
+	u32 function_mode;
+	u32 num_vfs = 0;
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 	attr.pdev = pdev;
 
-	if (bus != pdev->bus->number)
-		new_device = 1;
-	if (device != PCI_SLOT(pdev->devfn))
+	/* In SRIOV-17 mode, functions of the same adapter
+	 * can be deployed on different buses */
+	if ((!pdev->is_virtfn) && ((bus != pdev->bus->number) ||
+		(device != PCI_SLOT(pdev->devfn))))
 		new_device = 1;
 
 	bus = pdev->bus->number;
@@ -4133,6 +4168,11 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		"%s:%d  Vpath mask = %llx", __func__, __LINE__,
 		(unsigned long long)vpath_mask);
 
+	function_mode = ll_config.device_hw_info.function_mode;
+	host_type = ll_config.device_hw_info.host_type;
+	is_privileged = __vxge_hw_device_is_privilaged(host_type,
+		ll_config.device_hw_info.func_id);
+
 	/* Check how many vpaths are available */
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 		if (!((vpath_mask) & vxge_mBIT(i)))
@@ -4140,14 +4180,18 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		max_vpath_supported++;
 	}
 
+	if (new_device)
+		num_vfs = vxge_get_num_vfs(function_mode) - 1;
+
 	/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
-	if ((VXGE_HW_FUNCTION_MODE_SRIOV ==
-		ll_config.device_hw_info.function_mode) &&
-		(max_config_dev > 1) && (pdev->is_physfn)) {
-			ret = pci_enable_sriov(pdev, max_config_dev - 1);
-			if (ret)
-				vxge_debug_ll_config(VXGE_ERR,
-					"Failed to enable SRIOV: %d\n", ret);
+	if (is_sriov(function_mode) && (max_config_dev > 1) &&
+		(ll_config.intr_type != INTA) &&
+		(is_privileged == VXGE_HW_OK)) {
+		ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs)
+			? (max_config_dev - 1) : num_vfs);
+		if (ret)
+			vxge_debug_ll_config(VXGE_ERR,
+				"Failed in enabling SRIOV mode: %d\n", ret);
 	}
 
 	/*