ath10k: add board data download from target

The QCA9887 stores its calibration data (board.bin) inside the EEPROM of
the target. This has to be downloaded manually to allow the device to
initialize correctly.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
[kvalo@qca.qualcomm.com: handle -EOPNOTSUPP and s/fetch_board_data/fetch_cal_eeprom]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 41 insertions, 1 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index ed4e52e5d133..1e88251ca6d0 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/firmware.h>
 #include <linux/of.h>
+#include <asm/byteorder.h>
 
 #include "core.h"
 #include "mac.h"
@@ -573,6 +574,35 @@ out:
 	return ret;
 }
 
+static int ath10k_download_cal_eeprom(struct ath10k *ar)
+{
+	size_t data_len;
+	void *data = NULL;
+	int ret;
+
+	ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len);
+	if (ret) {
+		if (ret != -EOPNOTSUPP)
+			ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n",
+				    ret);
+		goto out_free;
+	}
+
+	ret = ath10k_download_board_data(ar, data, data_len);
+	if (ret) {
+		ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n",
+			    ret);
+		goto out_free;
+	}
+
+	ret = 0;
+
+out_free:
+	kfree(data);
+
+	return ret;
+}
+
 static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
 {
 	u32 result, address;
@@ -1335,7 +1365,17 @@ static int ath10k_download_cal_data(struct ath10k *ar)
 	}
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT,
-		   "boot did not find DT entry, try OTP next: %d\n",
+		   "boot did not find DT entry, try target EEPROM next: %d\n",
+		   ret);
+
+	ret = ath10k_download_cal_eeprom(ar);
+	if (ret == 0) {
+		ar->cal_mode = ATH10K_CAL_MODE_EEPROM;
+		goto done;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT,
+		   "boot did not find target EEPROM entry, try OTP next: %d\n",
 		   ret);
 
 	ret = ath10k_download_and_run_otp(ar);