diff options
| author |   Rajkumar Manoharan <rmanohar@qti.qualcomm.com> | 2016-09-02 19:46:09 +0300 |
|---|---|---|
| committer |   Kalle Valo <kvalo@qca.qualcomm.com> | 2016-09-09 14:49:47 +0300 |
| commit | 3c97f5de1f282492335a6aec1f94b77f7f899b8c (patch) | |
| tree | 82ebf604a8ce1975f98b43ddb64e02c6a6d94ab2 /drivers/net/wireless/ath/ath10k/pci.h | |
| parent | ath9k: mark ath_fill_led_pin() static (diff) | |
| download | linux-dev-3c97f5de1f282492335a6aec1f94b77f7f899b8c.tar.xz linux-dev-3c97f5de1f282492335a6aec1f94b77f7f899b8c.zip | |
ath10k: implement NAPI support
Add NAPI support for rx and tx completion. NAPI poll is scheduled
from interrupt handler. The design is as below
- on interrupt
- schedule napi and mask interrupts
- on poll
- process all pipes (no actual Tx/Rx)
- process Rx within budget
- if quota exceeds budget reschedule napi poll by returning budget
- process Tx completions and update budget if necessary
- process Tx fetch indications (pull-push)
- push any other pending Tx (if possible)
- before resched or napi completion replenish htt rx ring buffer
- if work done < budget, complete napi poll and unmask interrupts
This change also get rid of two tasklets (intr_tq and txrx_compl_task).
Measured peak throughput with NAPI on IPQ4019 platform in controlled
environment. No noticeable reduction in throughput is seen and also
observed improvements in CPU usage. Approx. 15% CPU usage got reduced
in UDP uplink case.
DL: AP DUT Tx
UL: AP DUT Rx
IPQ4019 (avg. cpu usage %)
========
TOT +NAPI
=========== =============
TCP DL 644 Mbps (42%) 645 Mbps (36%)
TCP UL 673 Mbps (30%) 675 Mbps (26%)
UDP DL 682 Mbps (49%) 680 Mbps (49%)
UDP UL 720 Mbps (28%) 717 Mbps (11%)
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/pci.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/pci.h | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 6eca1df2ce60..9854ad56b2de 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -177,8 +177,6 @@ struct ath10k_pci { /* Operating interrupt mode */ enum ath10k_pci_irq_mode oper_irq_mode; - struct tasklet_struct intr_tq; - struct ath10k_pci_pipe pipe_info[CE_COUNT_MAX]; /* Copy Engine used for Diagnostic Accesses */ @@ -294,8 +292,7 @@ void ath10k_pci_free_pipes(struct ath10k *ar); void ath10k_pci_free_pipes(struct ath10k *ar); void ath10k_pci_rx_replenish_retry(unsigned long ptr); void ath10k_pci_ce_deinit(struct ath10k *ar); -void ath10k_pci_init_irq_tasklets(struct ath10k *ar); -void ath10k_pci_kill_tasklet(struct ath10k *ar); +void ath10k_pci_init_napi(struct ath10k *ar); int ath10k_pci_init_pipes(struct ath10k *ar); int ath10k_pci_init_config(struct ath10k *ar); void ath10k_pci_rx_post(struct ath10k *ar); @@ -303,6 +300,7 @@ void ath10k_pci_flush(struct ath10k *ar); void ath10k_pci_enable_legacy_irq(struct ath10k *ar); bool ath10k_pci_irq_pending(struct ath10k *ar); void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar); +void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar); int ath10k_pci_wait_for_target_init(struct ath10k *ar); int ath10k_pci_setup_resource(struct ath10k *ar); void ath10k_pci_release_resource(struct ath10k *ar); |