Add ath6kl cleaned up driver

Last May we started working on cleaning up ath6kl driver which is
currently in staging. The work has happened in a separate
ath6kl-cleanup tree:

http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary

After over 1100 (!) patches we have now reached a state where I would
like to start discussing about pushing the driver to the wireless
trees and replacing the staging driver.

The driver is now a lot smaller and looks like a proper Linux driver.
The size of the driver (measured with simple wc -l) dropped from 49
kLOC to 18 kLOC and the number of the .c and .h files dropped from 107
to 22. Most importantly the number of subdirectories reduced from 26
to zero :)

There are two remaining checkpatch warnings in the driver which we
decided to omit for now:

drivers/net/wireless/ath/ath6kl/debug.c:31:
  WARNING: printk() should include KERN_ facility level
drivers/net/wireless/ath/ath6kl/sdio.c:527:
  WARNING: msleep < 20ms can sleep for up to 20ms;
  see Documentation/timers/timers-howto.txt

The driver has endian annotations for all the hardware specific
structures and there are no sparse errors. Unfortunately I don't have
any big endian hardware to test that right now.

We have been testing the driver both on x86 and arm platforms. The
code is also compiled with sparc and parisc cross compilers.

Notable missing features compared to the current staging driver are:

o HCI over SDIO support
o nl80211 testmode
o firmware logging
o suspend support

Testmode, firmware logging and suspend support will be added soon. HCI
over SDIO support will be more difficult as the HCI driver needs to
share code with the wifi driver. This is something we need to research
more.

Also I want to point out the changes I did for signed endian support.
As I wasn't able to find any support for signed endian annotations I
decided to follow what NTFS has done and added my own. Grep for sle16
and sle32, especially from wmi.h.

Various people have been working on the cleanup, the hall of
fame based on number of patches is:

   543  Vasanthakumar Thiagarajan
   403  Raja Mani
   252  Kalle Valo
    16  Vivek Natarajan
    12  Suraj Sumangala
     3  Joe Perches
     2  Jouni Malinen

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com>
Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 692 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c
new file mode 100644
index 000000000000..84676697d7eb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/bmi.c
@@ -0,0 +1,692 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "hif-ops.h"
+#include "target.h"
+#include "debug.h"
+
+static int ath6kl_get_bmi_cmd_credits(struct ath6kl *ar)
+{
+	u32 addr;
+	unsigned long timeout;
+	int ret;
+
+	ar->bmi.cmd_credits = 0;
+
+	/* Read the counter register to get the command credits */
+	addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
+
+		/*
+		 * Hit the credit counter with a 4-byte access, the first byte
+		 * read will hit the counter and cause a decrement, while the
+		 * remaining 3 bytes has no effect. The rationale behind this
+		 * is to make all HIF accesses 4-byte aligned.
+		 */
+		ret = hif_read_write_sync(ar, addr,
+					 (u8 *)&ar->bmi.cmd_credits, 4,
+					 HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("Unable to decrement the command credit count register: %d\n",
+				   ret);
+			return ret;
+		}
+
+		/* The counter is only 8 bits.
+		 * Ignore anything in the upper 3 bytes
+		 */
+		ar->bmi.cmd_credits &= 0xFF;
+	}
+
+	if (!ar->bmi.cmd_credits) {
+		ath6kl_err("bmi communication timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar, bool need_timeout)
+{
+	unsigned long timeout;
+	u32 rx_word = 0;
+	int ret = 0;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while ((!need_timeout || time_before(jiffies, timeout)) && !rx_word) {
+		ret = hif_read_write_sync(ar, RX_LOOKAHEAD_VALID_ADDRESS,
+					  (u8 *)&rx_word, sizeof(rx_word),
+					  HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
+			return ret;
+		}
+
+		 /* all we really want is one bit */
+		rx_word &= (1 << ENDPOINT1);
+	}
+
+	if (!rx_word) {
+		ath6kl_err("bmi_recv_buf FIFO empty\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int ath6kl_bmi_send_buf(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	int ret;
+	u32 addr;
+
+	ret = ath6kl_get_bmi_cmd_credits(ar);
+	if (ret)
+		return ret;
+
+	addr = ar->mbox_info.htc_addr;
+
+	ret = hif_read_write_sync(ar, addr, buf, len,
+				  HIF_WR_SYNC_BYTE_INC);
+	if (ret)
+		ath6kl_err("unable to send the bmi data to the device\n");
+
+	return ret;
+}
+
+static int ath6kl_bmi_recv_buf(struct ath6kl *ar,
+			u8 *buf, u32 len, bool want_timeout)
+{
+	int ret;
+	u32 addr;
+
+	/*
+	 * During normal bootup, small reads may be required.
+	 * Rather than issue an HIF Read and then wait as the Target
+	 * adds successive bytes to the FIFO, we wait here until
+	 * we know that response data is available.
+	 *
+	 * This allows us to cleanly timeout on an unexpected
+	 * Target failure rather than risk problems at the HIF level.
+	 * In particular, this avoids SDIO timeouts and possibly garbage
+	 * data on some host controllers.  And on an interconnect
+	 * such as Compact Flash (as well as some SDIO masters) which
+	 * does not provide any indication on data timeout, it avoids
+	 * a potential hang or garbage response.
+	 *
+	 * Synchronization is more difficult for reads larger than the
+	 * size of the MBOX FIFO (128B), because the Target is unable
+	 * to push the 129th byte of data until AFTER the Host posts an
+	 * HIF Read and removes some FIFO data.  So for large reads the
+	 * Host proceeds to post an HIF Read BEFORE all the data is
+	 * actually available to read.  Fortunately, large BMI reads do
+	 * not occur in practice -- they're supported for debug/development.
+	 *
+	 * So Host/Target BMI synchronization is divided into these cases:
+	 *  CASE 1: length < 4
+	 *        Should not happen
+	 *
+	 *  CASE 2: 4 <= length <= 128
+	 *        Wait for first 4 bytes to be in FIFO
+	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
+	 *        a BMI command credit, which indicates that the ENTIRE
+	 *        response is available in the the FIFO
+	 *
+	 *  CASE 3: length > 128
+	 *        Wait for the first 4 bytes to be in FIFO
+	 *
+	 * For most uses, a small timeout should be sufficient and we will
+	 * usually see a response quickly; but there may be some unusual
+	 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
+	 * For now, we use an unbounded busy loop while waiting for
+	 * BMI_EXECUTE.
+	 *
+	 * If BMI_EXECUTE ever needs to support longer-latency execution,
+	 * especially in production, this code needs to be enhanced to sleep
+	 * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently
+	 * a function of Host processor speed.
+	 */
+	if (len >= 4) { /* NB: Currently, always true */
+		ret = ath6kl_bmi_get_rx_lkahd(ar, want_timeout);
+		if (ret)
+			return ret;
+	}
+
+	addr = ar->mbox_info.htc_addr;
+	ret = hif_read_write_sync(ar, addr, buf, len,
+				  HIF_RD_SYNC_BYTE_INC);
+	if (ret) {
+		ath6kl_err("Unable to read the bmi data from the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_done(struct ath6kl *ar)
+{
+	int ret;
+	u32 cid = BMI_DONE;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_dbg(ATH6KL_DBG_BMI, "bmi done skipped\n");
+		return 0;
+	}
+
+	ar->bmi.done_sent = true;
+
+	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+	if (ret) {
+		ath6kl_err("Unable to send bmi done: %d\n", ret);
+		return ret;
+	}
+
+	ath6kl_bmi_cleanup(ar);
+
+	return 0;
+}
+
+int ath6kl_bmi_get_target_info(struct ath6kl *ar,
+			       struct ath6kl_bmi_target_info *targ_info)
+{
+	int ret;
+	u32 cid = BMI_GET_TARGET_INFO;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+	if (ret) {
+		ath6kl_err("Unable to send get target info: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath6kl_bmi_recv_buf(ar, (u8 *)&targ_info->version,
+			sizeof(targ_info->version), true);
+	if (ret) {
+		ath6kl_err("Unable to recv target info: %d\n", ret);
+		return ret;
+	}
+
+	if (le32_to_cpu(targ_info->version) == TARGET_VERSION_SENTINAL) {
+		/* Determine how many bytes are in the Target's targ_info */
+		ret = ath6kl_bmi_recv_buf(ar,
+				   (u8 *)&targ_info->byte_count,
+				   sizeof(targ_info->byte_count),
+				   true);
+		if (ret) {
+			ath6kl_err("unable to read target info byte count: %d\n",
+				   ret);
+			return ret;
+		}
+
+		/*
+		 * The target's targ_info doesn't match the host's targ_info.
+		 * We need to do some backwards compatibility to make this work.
+		 */
+		if (le32_to_cpu(targ_info->byte_count) != sizeof(*targ_info)) {
+			WARN_ON(1);
+			return -EINVAL;
+		}
+
+		/* Read the remainder of the targ_info */
+		ret = ath6kl_bmi_recv_buf(ar,
+				   ((u8 *)targ_info) +
+				   sizeof(targ_info->byte_count),
+				   sizeof(*targ_info) -
+				   sizeof(targ_info->byte_count),
+				   true);
+
+		if (ret) {
+			ath6kl_err("Unable to read target info (%d bytes): %d\n",
+				   targ_info->byte_count, ret);
+			return ret;
+		}
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_BMI, "target info (ver: 0x%x type: 0x%x)\n",
+		targ_info->version, targ_info->type);
+
+	return 0;
+}
+
+int ath6kl_bmi_read(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
+{
+	u32 cid = BMI_READ_MEMORY;
+	int ret;
+	u32 offset;
+	u32 len_remain, rx_len;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = BMI_DATASZ_MAX + sizeof(cid) + sizeof(addr) + sizeof(len);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI,
+		   "bmi read memory: device: addr: 0x%x, len: %d\n",
+		   addr, len);
+
+	len_remain = len;
+
+	while (len_remain) {
+		rx_len = (len_remain < BMI_DATASZ_MAX) ?
+					len_remain : BMI_DATASZ_MAX;
+		offset = 0;
+		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+		offset += sizeof(cid);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+		offset += sizeof(addr);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &rx_len, sizeof(rx_len));
+		offset += sizeof(len);
+
+		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		if (ret) {
+			ath6kl_err("Unable to write to the device: %d\n",
+				   ret);
+			return ret;
+		}
+		ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, rx_len, true);
+		if (ret) {
+			ath6kl_err("Unable to read from the device: %d\n",
+				   ret);
+			return ret;
+		}
+		memcpy(&buf[len - len_remain], ar->bmi.cmd_buf, rx_len);
+		len_remain -= rx_len; addr += rx_len;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_write(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
+{
+	u32 cid = BMI_WRITE_MEMORY;
+	int ret;
+	u32 offset;
+	u32 len_remain, tx_len;
+	const u32 header = sizeof(cid) + sizeof(addr) + sizeof(len);
+	u8 aligned_buf[BMI_DATASZ_MAX];
+	u8 *src;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	if ((BMI_DATASZ_MAX + header) > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	memset(ar->bmi.cmd_buf, 0, BMI_DATASZ_MAX + header);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI,
+		  "bmi write memory: addr: 0x%x, len: %d\n", addr, len);
+
+	len_remain = len;
+	while (len_remain) {
+		src = &buf[len - len_remain];
+
+		if (len_remain < (BMI_DATASZ_MAX - header)) {
+			if (len_remain & 3) {
+				/* align it with 4 bytes */
+				len_remain = len_remain +
+					     (4 - (len_remain & 3));
+				memcpy(aligned_buf, src, len_remain);
+				src = aligned_buf;
+			}
+			tx_len = len_remain;
+		} else {
+			tx_len = (BMI_DATASZ_MAX - header);
+		}
+
+		offset = 0;
+		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+		offset += sizeof(cid);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+		offset += sizeof(addr);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &tx_len, sizeof(tx_len));
+		offset += sizeof(tx_len);
+		memcpy(&(ar->bmi.cmd_buf[offset]), src, tx_len);
+		offset += tx_len;
+
+		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		if (ret) {
+			ath6kl_err("Unable to write to the device: %d\n",
+				   ret);
+			return ret;
+		}
+		len_remain -= tx_len; addr += tx_len;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param)
+{
+	u32 cid = BMI_EXECUTE;
+	int ret;
+	u32 offset;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = sizeof(cid) + sizeof(addr) + sizeof(param);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi execute: addr: 0x%x, param: %d)\n",
+		   addr, *param);
+
+	offset = 0;
+	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+	offset += sizeof(cid);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+	offset += sizeof(addr);
+	memcpy(&(ar->bmi.cmd_buf[offset]), param, sizeof(*param));
+	offset += sizeof(*param);
+
+	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	if (ret) {
+		ath6kl_err("Unable to write to the device: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param), false);
+	if (ret) {
+		ath6kl_err("Unable to read from the device: %d\n", ret);
+		return ret;
+	}
+
+	memcpy(param, ar->bmi.cmd_buf, sizeof(*param));
+
+	return 0;
+}
+
+int ath6kl_bmi_set_app_start(struct ath6kl *ar, u32 addr)
+{
+	u32 cid = BMI_SET_APP_START;
+	int ret;
+	u32 offset;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = sizeof(cid) + sizeof(addr);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi set app start: addr: 0x%x\n", addr);
+
+	offset = 0;
+	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+	offset += sizeof(cid);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+	offset += sizeof(addr);
+
+	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	if (ret) {
+		ath6kl_err("Unable to write to the device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_reg_read(struct ath6kl *ar, u32 addr, u32 *param)
+{
+	u32 cid = BMI_READ_SOC_REGISTER;
+	int ret;
+	u32 offset;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = sizeof(cid) + sizeof(addr);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi read SOC reg: addr: 0x%x\n", addr);
+
+	offset = 0;
+	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+	offset += sizeof(cid);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+	offset += sizeof(addr);
+
+	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	if (ret) {
+		ath6kl_err("Unable to write to the device: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param), true);
+	if (ret) {
+		ath6kl_err("Unable to read from the device: %d\n", ret);
+		return ret;
+	}
+	memcpy(param, ar->bmi.cmd_buf, sizeof(*param));
+
+	return 0;
+}
+
+int ath6kl_bmi_reg_write(struct ath6kl *ar, u32 addr, u32 param)
+{
+	u32 cid = BMI_WRITE_SOC_REGISTER;
+	int ret;
+	u32 offset;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = sizeof(cid) + sizeof(addr) + sizeof(param);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI,
+		   "bmi write SOC reg: addr: 0x%x, param: %d\n",
+		    addr, param);
+
+	offset = 0;
+	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+	offset += sizeof(cid);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+	offset += sizeof(addr);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &param, sizeof(param));
+	offset += sizeof(param);
+
+	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	if (ret) {
+		ath6kl_err("Unable to write to the device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_lz_data(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	u32 cid = BMI_LZ_DATA;
+	int ret;
+	u32 offset;
+	u32 len_remain, tx_len;
+	const u32 header = sizeof(cid) + sizeof(len);
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = BMI_DATASZ_MAX + header;
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi send LZ data: len: %d)\n",
+		   len);
+
+	len_remain = len;
+	while (len_remain) {
+		tx_len = (len_remain < (BMI_DATASZ_MAX - header)) ?
+			  len_remain : (BMI_DATASZ_MAX - header);
+
+		offset = 0;
+		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+		offset += sizeof(cid);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &tx_len, sizeof(tx_len));
+		offset += sizeof(tx_len);
+		memcpy(&(ar->bmi.cmd_buf[offset]), &buf[len - len_remain],
+			tx_len);
+		offset += tx_len;
+
+		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		if (ret) {
+			ath6kl_err("Unable to write to the device: %d\n",
+				   ret);
+			return ret;
+		}
+
+		len_remain -= tx_len;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_lz_stream_start(struct ath6kl *ar, u32 addr)
+{
+	u32 cid = BMI_LZ_STREAM_START;
+	int ret;
+	u32 offset;
+	u16 size;
+
+	if (ar->bmi.done_sent) {
+		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);
+		return -EACCES;
+	}
+
+	size = sizeof(cid) + sizeof(addr);
+	if (size > MAX_BMI_CMDBUF_SZ) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	memset(ar->bmi.cmd_buf, 0, size);
+
+	ath6kl_dbg(ATH6KL_DBG_BMI,
+		   "bmi LZ stream start: addr: 0x%x)\n",
+		    addr);
+
+	offset = 0;
+	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));
+	offset += sizeof(cid);
+	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
+	offset += sizeof(addr);
+
+	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	if (ret) {
+		ath6kl_err("Unable to start LZ stream to the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ath6kl_bmi_fast_download(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
+{
+	int ret;
+	u32 last_word = 0;
+	u32 last_word_offset = len & ~0x3;
+	u32 unaligned_bytes = len & 0x3;
+
+	ret = ath6kl_bmi_lz_stream_start(ar, addr);
+	if (ret)
+		return ret;
+
+	if (unaligned_bytes) {
+		/* copy the last word into a zero padded buffer */
+		memcpy(&last_word, &buf[last_word_offset], unaligned_bytes);
+	}
+
+	ret = ath6kl_bmi_lz_data(ar, buf, last_word_offset);
+	if (ret)
+		return ret;
+
+	if (unaligned_bytes)
+		ret = ath6kl_bmi_lz_data(ar, (u8 *)&last_word, 4);
+
+	if (!ret) {
+		/* Close compressed stream and open a new (fake) one.
+		 * This serves mainly to flush Target caches. */
+		ret = ath6kl_bmi_lz_stream_start(ar, 0x00);
+	}
+	return ret;
+}
+
+int ath6kl_bmi_init(struct ath6kl *ar)
+{
+	ar->bmi.cmd_buf = kzalloc(MAX_BMI_CMDBUF_SZ, GFP_ATOMIC);
+
+	if (!ar->bmi.cmd_buf)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void ath6kl_bmi_cleanup(struct ath6kl *ar)
+{
+	kfree(ar->bmi.cmd_buf);
+	ar->bmi.cmd_buf = NULL;
+}