diff options
| author |   Felix Fietkau <nbd@openwrt.org> | 2012-12-10 14:03:17 +0100 |
|---|---|---|
| committer |   John W. Linville <linville@tuxdriver.com> | 2012-12-10 15:49:54 -0500 |
| commit | b7c0c238898d200e80487516e2b67aba2a522cc0 (patch) | |
| tree | 21ac93c97d933eb26fb4f07f08d57f5e1cd67eb8 /drivers/net/wireless/ath/ath9k/calib.c | |
| parent | bcma: mips: fix clearing device IRQ (diff) | |
| download | linux-dev-b7c0c238898d200e80487516e2b67aba2a522cc0.tar.xz linux-dev-b7c0c238898d200e80487516e2b67aba2a522cc0.zip | |
ath9k_hw: Fix signal strength / channel noise reporting
While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor
for a chip measured in clean air, it refers to the lowest expected reading.
Depending on the frequency, this measurement can vary by about 6db, thus
causing a higher reported channel noise and signal strength.
Factor in the 6db offset when converting internal noisefloor to channel noise.
This patch makes the reported values more accurate for all chips without
affecting NF calibration behavior.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/calib.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/calib.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index f3448a032e6f..1e8508530e98 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -69,6 +69,7 @@ s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan) if (chan && chan->noisefloor) { s8 delta = chan->noisefloor - + ATH9K_NF_CAL_NOISE_THRESH - ath9k_hw_get_default_nf(ah, chan); if (delta > 0) noise += delta; |