diff options
| author |   Lior David <qca_liord@qca.qualcomm.com> | 2017-04-05 14:58:06 +0300 |
|---|---|---|
| committer |   Kalle Valo <kvalo@qca.qualcomm.com> | 2017-04-13 15:45:48 +0300 |
| commit | 52a457020a89158f4eb886544165dc162ca9a35e (patch) | |
| tree | 6bea09ead401dde53419b3ad7b941d9d8554c3ad /drivers/net/wireless/ath/wil6210/txrx.c | |
| parent | wil6210: restore power save state after internal FW reset (diff) | |
| download | linux-dev-52a457020a89158f4eb886544165dc162ca9a35e.tar.xz linux-dev-52a457020a89158f4eb886544165dc162ca9a35e.zip | |
wil6210: support 8KB RX buffers
The 11ad spec requires 11ad devices to be able to receive 8KB
packets over the air. Currently this is only possible by
loading the driver with mtu_max=7912 but this also forces
a smaller block ACK window size which reduces performance
for stations which transmit normal sized packets (<2KB).
Fix this problem as follows:
1. Add a module parameter rx_large_buf that when set,
will allocate 8KB RX buffers regardless of mtu_max
setting.
2. When receiving block ACK request agree to any window
size not above our maximum, regardless of the mtu_max setting.
This means if the other side transmits small packets (2KB)
it can still set up block ACK with a large window size,
and get better performance.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/txrx.c')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/txrx.c | 24 |
1 files changed, 22 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 67f50ae17cd3..edab4c0a900f 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -37,6 +37,10 @@ bool rx_align_2; module_param(rx_align_2, bool, 0444); MODULE_PARM_DESC(rx_align_2, " align Rx buffers on 4*n+2, default - no"); +bool rx_large_buf; +module_param(rx_large_buf, bool, 0444); +MODULE_PARM_DESC(rx_large_buf, " allocate 8KB RX buffers, default - no"); + static inline uint wil_rx_snaplen(void) { return rx_align_2 ? 6 : 0; @@ -255,7 +259,7 @@ static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring, u32 i, int headroom) { struct device *dev = wil_to_dev(wil); - unsigned int sz = mtu_max + ETH_HLEN + wil_rx_snaplen(); + unsigned int sz = wil->rx_buf_len + ETH_HLEN + wil_rx_snaplen(); struct vring_rx_desc dd, *d = ⅆ volatile struct vring_rx_desc *_d = &vring->va[i].rx; dma_addr_t pa; @@ -419,7 +423,7 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, struct sk_buff *skb; dma_addr_t pa; unsigned int snaplen = wil_rx_snaplen(); - unsigned int sz = mtu_max + ETH_HLEN + snaplen; + unsigned int sz = wil->rx_buf_len + ETH_HLEN + snaplen; u16 dmalen; u8 ftype; int cid; @@ -780,6 +784,20 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota) wil_rx_refill(wil, v->size); } +static void wil_rx_buf_len_init(struct wil6210_priv *wil) +{ + wil->rx_buf_len = rx_large_buf ? + WIL_MAX_ETH_MTU : TXRX_BUF_LEN_DEFAULT - WIL_MAX_MPDU_OVERHEAD; + if (mtu_max > wil->rx_buf_len) { + /* do not allow RX buffers to be smaller than mtu_max, for + * backward compatibility (mtu_max parameter was also used + * to support receiving large packets) + */ + wil_info(wil, "Override RX buffer to mtu_max(%d)\n", mtu_max); + wil->rx_buf_len = mtu_max; + } +} + int wil_rx_init(struct wil6210_priv *wil, u16 size) { struct vring *vring = &wil->vring_rx; @@ -792,6 +810,8 @@ int wil_rx_init(struct wil6210_priv *wil, u16 size) return -EINVAL; } + wil_rx_buf_len_init(wil); + vring->size = size; rc = wil_vring_alloc(wil, vring); if (rc) |