Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 452 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c b/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c
new file mode 100644
index 000000000000..b662cf35b033
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/ucode.c
@@ -0,0 +1,452 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2015 Intel Deutschland GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+
+#include "iwl-io.h"
+#include "iwl-agn-hw.h"
+#include "iwl-trans.h"
+#include "iwl-fh.h"
+#include "iwl-op-mode.h"
+
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static inline const struct fw_img *
+iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type)
+{
+	if (ucode_type >= IWL_UCODE_TYPE_MAX)
+		return NULL;
+
+	return &priv->fw->img[ucode_type];
+}
+
+/*
+ *  Calibration
+ */
+static int iwl_set_Xtal_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_xtal_freq_cmd cmd;
+	__le16 *xtal_calib = priv->nvm_data->xtal_calib;
+
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
+	cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+	cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset = priv->nvm_data->raw_temperature;
+	if (!(cmd.radio_sensor_offset))
+		cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset));
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_v2_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset_high = priv->nvm_data->kelvin_temperature;
+	cmd.radio_sensor_offset_low = priv->nvm_data->raw_temperature;
+	if (!cmd.radio_sensor_offset_low) {
+		IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
+		cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
+		cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
+	}
+	cmd.burntVoltageRef = priv->nvm_data->calib_voltage;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_high));
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_low));
+	IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
+			le16_to_cpu(cmd.burntVoltageRef));
+
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_send_calib_cfg(struct iwl_priv *priv)
+{
+	struct iwl_calib_cfg_cmd calib_cfg_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = CALIBRATION_CFG_CMD,
+		.len = { sizeof(struct iwl_calib_cfg_cmd), },
+		.data = { &calib_cfg_cmd, },
+	};
+
+	memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
+	calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.flags =
+		IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK;
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+int iwl_init_alive_start(struct iwl_priv *priv)
+{
+	int ret;
+
+	if (priv->lib->bt_params &&
+	    priv->lib->bt_params->advanced_bt_coexist) {
+		/*
+		 * Tell uCode we are ready to perform calibration
+		 * need to perform this before any calibration
+		 * no need to close the envlope since we are going
+		 * to load the runtime uCode later.
+		 */
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+			BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+
+	}
+
+	ret = iwl_send_calib_cfg(priv);
+	if (ret)
+		return ret;
+
+	/**
+	 * temperature offset calibration is only needed for runtime ucode,
+	 * so prepare the value now.
+	 */
+	if (priv->lib->need_temp_offset_calib) {
+		if (priv->lib->temp_offset_v2)
+			return iwl_set_temperature_offset_calib_v2(priv);
+		else
+			return iwl_set_temperature_offset_calib(priv);
+	}
+
+	return 0;
+}
+
+static int iwl_send_wimax_coex(struct iwl_priv *priv)
+{
+	struct iwl_wimax_coex_cmd coex_cmd;
+
+	/* coexistence is disabled */
+	memset(&coex_cmd, 0, sizeof(coex_cmd));
+
+	return iwl_dvm_send_cmd_pdu(priv,
+				COEX_PRIORITY_TABLE_CMD, 0,
+				sizeof(coex_cmd), &coex_cmd);
+}
+
+static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	0, 0, 0, 0, 0, 0, 0
+};
+
+void iwl_send_prio_tbl(struct iwl_priv *priv)
+{
+	struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
+
+	memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl,
+		sizeof(iwl_bt_prio_tbl));
+	if (iwl_dvm_send_cmd_pdu(priv,
+				REPLY_BT_COEX_PRIO_TABLE, 0,
+				sizeof(prio_tbl_cmd), &prio_tbl_cmd))
+		IWL_ERR(priv, "failed to send BT prio tbl command\n");
+}
+
+int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+{
+	struct iwl_bt_coex_prot_env_cmd env_cmd;
+	int ret;
+
+	env_cmd.action = action;
+	env_cmd.type = type;
+	ret = iwl_dvm_send_cmd_pdu(priv,
+			       REPLY_BT_COEX_PROT_ENV, 0,
+			       sizeof(env_cmd), &env_cmd);
+	if (ret)
+		IWL_ERR(priv, "failed to send BT env command\n");
+	return ret;
+}
+
+static const u8 iwlagn_default_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+};
+
+static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+	IWL_TX_FIFO_BK_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_UNUSED,
+	IWL_TX_FIFO_AUX,
+};
+
+static int iwl_alive_notify(struct iwl_priv *priv)
+{
+	const u8 *queue_to_txf;
+	u8 n_queues;
+	int ret;
+	int i;
+
+	iwl_trans_fw_alive(priv->trans, 0);
+
+	if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN &&
+	    priv->nvm_data->sku_cap_ipan_enable) {
+		n_queues = ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_ipan_queue_to_tx_fifo;
+	} else {
+		n_queues = ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
+		queue_to_txf = iwlagn_default_queue_to_tx_fifo;
+	}
+
+	for (i = 0; i < n_queues; i++)
+		if (queue_to_txf[i] != IWL_TX_FIFO_UNUSED)
+			iwl_trans_ac_txq_enable(priv->trans, i,
+						queue_to_txf[i], 0);
+
+	priv->passive_no_rx = false;
+	priv->transport_queue_stop = 0;
+
+	ret = iwl_send_wimax_coex(priv);
+	if (ret)
+		return ret;
+
+	if (!priv->lib->no_xtal_calib) {
+		ret = iwl_set_Xtal_calib(priv);
+		if (ret)
+			return ret;
+	}
+
+	return iwl_send_calib_results(priv);
+}
+
+struct iwl_alive_data {
+	bool valid;
+	u8 subtype;
+};
+
+static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
+			 struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv =
+		container_of(notif_wait, struct iwl_priv, notif_wait);
+	struct iwl_alive_data *alive_data = data;
+	struct iwl_alive_resp *palive;
+
+	palive = (void *)pkt->data;
+
+	IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	priv->device_pointers.error_event_table =
+		le32_to_cpu(palive->error_event_table_ptr);
+	priv->device_pointers.log_event_table =
+		le32_to_cpu(palive->log_event_table_ptr);
+
+	alive_data->subtype = palive->ver_subtype;
+	alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+
+	return true;
+}
+
+#define UCODE_ALIVE_TIMEOUT	HZ
+#define UCODE_CALIB_TIMEOUT	(2*HZ)
+
+int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
+				 enum iwl_ucode_type ucode_type)
+{
+	struct iwl_notification_wait alive_wait;
+	struct iwl_alive_data alive_data;
+	const struct fw_img *fw;
+	int ret;
+	enum iwl_ucode_type old_type;
+	static const u16 alive_cmd[] = { REPLY_ALIVE };
+
+	fw = iwl_get_ucode_image(priv, ucode_type);
+	if (WARN_ON(!fw))
+		return -EINVAL;
+
+	old_type = priv->cur_ucode;
+	priv->cur_ucode = ucode_type;
+	priv->ucode_loaded = false;
+
+	iwl_init_notification_wait(&priv->notif_wait, &alive_wait,
+				   alive_cmd, ARRAY_SIZE(alive_cmd),
+				   iwl_alive_fn, &alive_data);
+
+	ret = iwl_trans_start_fw(priv->trans, fw, false);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		iwl_remove_notification(&priv->notif_wait, &alive_wait);
+		return ret;
+	}
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the ALIVE notification here.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &alive_wait,
+					UCODE_ALIVE_TIMEOUT);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	if (!alive_data.valid) {
+		IWL_ERR(priv, "Loaded ucode is not valid!\n");
+		priv->cur_ucode = old_type;
+		return -EIO;
+	}
+
+	priv->ucode_loaded = true;
+
+	if (ucode_type != IWL_UCODE_WOWLAN) {
+		/* delay a bit to give rfkill time to run */
+		msleep(5);
+	}
+
+	ret = iwl_alive_notify(priv);
+	if (ret) {
+		IWL_WARN(priv,
+			"Could not complete ALIVE transition: %d\n", ret);
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	return 0;
+}
+
+static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait,
+			      struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv = data;
+	struct iwl_calib_hdr *hdr;
+
+	if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) {
+		WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION);
+		return true;
+	}
+
+	hdr = (struct iwl_calib_hdr *)pkt->data;
+
+	if (iwl_calib_set(priv, hdr, iwl_rx_packet_payload_len(pkt)))
+		IWL_ERR(priv, "Failed to record calibration data %d\n",
+			hdr->op_code);
+
+	return false;
+}
+
+int iwl_run_init_ucode(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	static const u16 calib_complete[] = {
+		CALIBRATION_RES_NOTIFICATION,
+		CALIBRATION_COMPLETE_NOTIFICATION
+	};
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* No init ucode required? Curious, but maybe ok */
+	if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len)
+		return 0;
+
+	iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
+				   calib_complete, ARRAY_SIZE(calib_complete),
+				   iwlagn_wait_calib, priv);
+
+	/* Will also start the device */
+	ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
+	if (ret)
+		goto error;
+
+	ret = iwl_init_alive_start(priv);
+	if (ret)
+		goto error;
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the calibration complete notification.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
+					UCODE_CALIB_TIMEOUT);
+
+	goto out;
+
+ error:
+	iwl_remove_notification(&priv->notif_wait, &calib_wait);
+ out:
+	/* Whatever happened, stop the device */
+	iwl_trans_stop_device(priv->trans);
+	priv->ucode_loaded = false;
+
+	return ret;
+}