Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless

John W. Linville says:

====================
This is a big pull request for new features intended for the 3.10
stream...

Regarding mac80211, Johannes says:

"First, I merged mac80211/master to avoid some conflicts. This brings in
a bunch of fixes you're already familiar with. For real -next material,
I have a whole bunch of minstrel work, minstrel_ht from Felix and legacy
minstrel from Thomas (Huehn). The other Thomas (Pedersen) did a number
of changes in mesh to allow userspace peering management even when the
mesh isn't secured. Stanislaw changes suspend/resume to always
disconnect the networks. This is typically already done by
network-manager so won't make a huge difference for most users, but
fixes a number problems, particularly with USB drivers that can easily
disconnect while suspended. Ilan has a small change to allow mac80211
drivers to differentiate remain-on-channel reasons, and Jouni extends
nl80211 to allow fast roaming with full-MAC devices. I have a fairly
large number of patches as well, many of them fairly simple cleanups,
but also allowing split wiphy dumps and adding back the full wiphy
information in nl80211, station entry change checking and more VHT work
including VHT capability overrides (mostly for testing purposes)."

And for iwlwifi, Johannes says:

"Here, I also merged iwlwifi-fixes to avoid conflicts, and otherwise have
various cleanups and improvements on the MVM driver, along with a few
throughout the driver. Other than Bluetooth Coexistence from Emmanuel
there's no over-arching theme, so listing them would pretty much
reproduce the shortlog."

Regarding NFC, Samuel says:

"The 2 features we have with this one are:

- An LLCP Service Name Lookup (SNL) netlink interface for querying LLCP
  service availability from user space.
  Along the way, Thierry also improved the existing SNL interface for
  aggregating SNL responses.

- An initial LLCP socket options implementation, for setting the Receive
  Window (RW) and the Maximum Information Unit Extension (MIUX) per socket.
  This is need for the LLCP validation tests.

We also have a microread MEI build failure here: I am not sending this one to
3.9 because the MEI bus code is not there yet, so it won't break for anyone
else than me."

And for ath6kl, Kalle says:

"I added tracing support to ath6kl, along with a new Kconfig option. Now
there's also a workaround to reset USB devices when the firmware upload
fails, this happened when host was warm rebooted. There are also quite a
few small fixes or cleanup."

On top of all that, there is the usual bundle of driver updates
with new features, new hardware support and the like mixed-in.
The ath9k, b43, brcmfmac, mwifiex, rt2800, and wil6210 drivers
are all well-represented, and a few other drivers are hit as well.
I also pulled-in the wireless fixes tree in order to resolve some
pending merge conflicts.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 179 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
new file mode 100644
index 000000000000..403f3f224bf6
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -0,0 +1,179 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+#include "iwl-csr.h"
+
+/* Highest firmware API version supported */
+#define IWL5000_UCODE_API_MAX 5
+#define IWL5150_UCODE_API_MAX 2
+
+/* Oldest version we won't warn about */
+#define IWL5000_UCODE_API_OK 5
+#define IWL5150_UCODE_API_OK 2
+
+/* Lowest firmware API version supported */
+#define IWL5000_UCODE_API_MIN 1
+#define IWL5150_UCODE_API_MIN 1
+
+/* EEPROM versions */
+#define EEPROM_5000_TX_POWER_VERSION	(4)
+#define EEPROM_5000_EEPROM_VERSION	(0x11A)
+#define EEPROM_5050_TX_POWER_VERSION	(4)
+#define EEPROM_5050_EEPROM_VERSION	(0x21E)
+
+#define IWL5000_FW_PRE "iwlwifi-5000-"
+#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode"
+
+#define IWL5150_FW_PRE "iwlwifi-5150-"
+#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode"
+
+static const struct iwl_base_params iwl5000_base_params = {
+	.eeprom_size = IWLAGN_EEPROM_IMG_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.led_compensation = 51,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.wd_timeout = IWL_WATCHDOG_DISABLED,
+	.max_event_log_size = 512,
+	.no_idle_support = true,
+};
+
+static const struct iwl_ht_params iwl5000_ht_params = {
+	.ht_greenfield_support = true,
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+static const struct iwl_eeprom_params iwl5000_eeprom_params = {
+	.regulatory_bands = {
+		EEPROM_REG_BAND_1_CHANNELS,
+		EEPROM_REG_BAND_2_CHANNELS,
+		EEPROM_REG_BAND_3_CHANNELS,
+		EEPROM_REG_BAND_4_CHANNELS,
+		EEPROM_REG_BAND_5_CHANNELS,
+		EEPROM_REG_BAND_24_HT40_CHANNELS,
+		EEPROM_REG_BAND_52_HT40_CHANNELS
+	},
+};
+
+#define IWL_DEVICE_5000						\
+	.fw_name_pre = IWL5000_FW_PRE,				\
+	.ucode_api_max = IWL5000_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL5000_UCODE_API_OK,			\
+	.ucode_api_min = IWL5000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_5000,		\
+	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
+	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_5000_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_5000_TX_POWER_VERSION,	\
+	.base_params = &iwl5000_base_params,			\
+	.eeprom_params = &iwl5000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK
+
+const struct iwl_cfg iwl5300_agn_cfg = {
+	.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
+	IWL_DEVICE_5000,
+	/* at least EEPROM 0x11A has wrong info */
+	.valid_tx_ant = ANT_ABC,	/* .cfg overwrite */
+	.valid_rx_ant = ANT_ABC,	/* .cfg overwrite */
+	.ht_params = &iwl5000_ht_params,
+};
+
+const struct iwl_cfg iwl5100_bgn_cfg = {
+	.name = "Intel(R) WiFi Link 5100 BGN",
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
+	.ht_params = &iwl5000_ht_params,
+};
+
+const struct iwl_cfg iwl5100_abg_cfg = {
+	.name = "Intel(R) WiFi Link 5100 ABG",
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
+};
+
+const struct iwl_cfg iwl5100_agn_cfg = {
+	.name = "Intel(R) WiFi Link 5100 AGN",
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
+	.ht_params = &iwl5000_ht_params,
+};
+
+const struct iwl_cfg iwl5350_agn_cfg = {
+	.name = "Intel(R) WiMAX/WiFi Link 5350 AGN",
+	.fw_name_pre = IWL5000_FW_PRE,
+	.ucode_api_max = IWL5000_UCODE_API_MAX,
+	.ucode_api_ok = IWL5000_UCODE_API_OK,
+	.ucode_api_min = IWL5000_UCODE_API_MIN,
+	.device_family = IWL_DEVICE_FAMILY_5000,
+	.max_inst_size = IWLAGN_RTC_INST_SIZE,
+	.max_data_size = IWLAGN_RTC_DATA_SIZE,
+	.nvm_ver = EEPROM_5050_EEPROM_VERSION,
+	.nvm_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.base_params = &iwl5000_base_params,
+	.eeprom_params = &iwl5000_eeprom_params,
+	.ht_params = &iwl5000_ht_params,
+	.led_mode = IWL_LED_BLINK,
+	.internal_wimax_coex = true,
+};
+
+#define IWL_DEVICE_5150						\
+	.fw_name_pre = IWL5150_FW_PRE,				\
+	.ucode_api_max = IWL5150_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL5150_UCODE_API_OK,			\
+	.ucode_api_min = IWL5150_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_5150,		\
+	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
+	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_5050_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_5050_TX_POWER_VERSION,	\
+	.base_params = &iwl5000_base_params,			\
+	.eeprom_params = &iwl5000_eeprom_params,		\
+	.no_xtal_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl5150_agn_cfg = {
+	.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
+	IWL_DEVICE_5150,
+	.ht_params = &iwl5000_ht_params,
+
+};
+
+const struct iwl_cfg iwl5150_abg_cfg = {
+	.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
+	IWL_DEVICE_5150,
+};
+
+MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK));