Merge tag 'master-2014-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-12-08

Please pull this last batch of pending wireless updates for the 3.19 tree...

For the wireless bits, Johannes says:

"This time I have Felix's no-status rate control work, which will allow
drivers to work better with rate control even if they don't have perfect
status reporting. In addition to this, a small hwsim fix from Patrik,
one of the regulatory patches from Arik, and a number of cleanups and
fixes I did myself.

Of note is a patch where I disable CFG80211_WEXT so that compatibility
is no longer selectable - this is intended as a wake-up call for anyone
who's still using it, and is still easily worked around (it's a one-line
patch) before we fully remove the code as well in the future."

For the Bluetooth bits, Johan says:

"Here's one more bluetooth-next pull request for 3.19:

 - Minor cleanups for ieee802154 & mac802154
 - Fix for the kernel warning with !TASK_RUNNING reported by Kirill A.
   Shutemov
 - Support for another ath3k device
 - Fix for tracking link key based security level
 - Device tree bindings for btmrvl + a state update fix
 - Fix for wrong ACL flags on LE links"

And...

"In addition to the previous one this contains two more cleanups to
mac802154 as well as support for some new HCI features from the
Bluetooth 4.2 specification.

From the original request:

'Here's what should be the last bluetooth-next pull request for 3.19.
It's rather large but the majority of it is the Low Energy Secure
Connections feature that's part of the Bluetooth 4.2 specification. The
specification went public only this week so we couldn't publish the
corresponding code before that. The code itself can nevertheless be
considered fairly mature as it's been in development for over 6 months
and gone through several interoperability test events.

Besides LE SC the pull request contains an important fix for command
complete events for mgmt sockets which also fixes some leaks of hci_conn
objects when powering off or unplugging Bluetooth adapters.

A smaller feature that's part of the pull request is service discovery
support. This is like normal device discovery except that devices not
matching specific UUIDs or strong enough RSSI are filtered out.

Other changes that the pull request contains are firmware dump support
to the btmrvl driver, firmware download support for Broadcom BCM20702A0
variants, as well as some coding style cleanups in 6lowpan &
ieee802154/mac802154 code.'"

For the NFC bits, Samuel says:

"With this one we get:

- NFC digital improvements for DEP support: Chaining, NACK and ATN
  support added.

- NCI improvements: Support for p2p target, SE IO operand addition,
  SE operands extensions to support proprietary implementations, and
  a few fixes.

- NFC HCI improvements: OPEN_PIPE and NOTIFY_ALL_CLEARED support,
  and SE IO operand addition.

- A bunch of minor improvements and fixes for STMicro st21nfcb and
  st21nfca"

For the iwlwifi bits, Emmanuel says:

"Major works are CSA and TDLS. On top of that I have a new
firmware API for scan and a few rate control improvements.
Johannes find a few tricks to improve our CPU utilization
and adds support for a new spin of 7265 called 7265D.
Along with this a few random things that don't stand out."

And...

"I deprecate here -8.ucode since -9 has been published long ago.
Along with that I have a new activity, we have now better
a infrastructure for firmware debugging. This will allow to
have configurable probes insides the firmware.
Luca continues his work on NetDetect, this feature is now
complete. All the rest is minor fixes here and there."

For the Atheros bits, Kalle says:

"Only ath10k changes this time and no major changes. Most visible are:

o new debugfs interface for runtime firmware debugging (Yanbo)

o fix shared WEP (Sujith)

o don't rebuild whenever kernel version changes (Johannes)

o lots of refactoring to make it easier to add new hw support (Michal)

There's also smaller fixes and improvements with no point of listing
here."

In addition, there are a few last minute updates to ath5k,
ath9k, brcmfmac, brcmsmac, mwifiex, rt2x00, rtlwifi, and wil6210.
Also included is a pull of the wireless tree to pick-up the fixes
originally included in "pull request: wireless 2014-12-03"...

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 308 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index 401f7be36b93..f2a047f6bb3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -131,6 +131,9 @@ enum iwl_ucode_tlv_type {
 	IWL_UCODE_TLV_API_CHANGES_SET	= 29,
 	IWL_UCODE_TLV_ENABLED_CAPABILITIES	= 30,
 	IWL_UCODE_TLV_N_SCAN_CHANNELS		= 31,
+	IWL_UCODE_TLV_SEC_RT_USNIFFER	= 34,
+	IWL_UCODE_TLV_FW_DBG_DEST	= 38,
+	IWL_UCODE_TLV_FW_DBG_CONF	= 39,
 };
 
 struct iwl_ucode_tlv {
@@ -179,4 +182,309 @@ struct iwl_ucode_capa {
 	__le32 api_capa;
 } __packed;
 
+/**
+ * enum iwl_ucode_tlv_flag - ucode API flags
+ * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
+ *	was a separate TLV but moved here to save space.
+ * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
+ *	treats good CRC threshold as a boolean
+ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
+ * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
+ * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
+ * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
+ *	offload profile config command.
+ * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
+ *	(rather than two) IPv6 addresses
+ * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
+ *	from the probe request template.
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
+ * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
+ *	P2P client interfaces simultaneously if they are in different bindings.
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
+ *	P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
+ * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
+ * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
+ */
+enum iwl_ucode_tlv_flag {
+	IWL_UCODE_TLV_FLAGS_PAN			= BIT(0),
+	IWL_UCODE_TLV_FLAGS_NEWSCAN		= BIT(1),
+	IWL_UCODE_TLV_FLAGS_MFP			= BIT(2),
+	IWL_UCODE_TLV_FLAGS_P2P			= BIT(3),
+	IWL_UCODE_TLV_FLAGS_DW_BC_TABLE		= BIT(4),
+	IWL_UCODE_TLV_FLAGS_SHORT_BL		= BIT(7),
+	IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS	= BIT(10),
+	IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID	= BIT(12),
+	IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL	= BIT(15),
+	IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE	= BIT(16),
+	IWL_UCODE_TLV_FLAGS_P2P_PM		= BIT(21),
+	IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM	= BIT(22),
+	IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM	= BIT(23),
+	IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT	= BIT(24),
+	IWL_UCODE_TLV_FLAGS_EBS_SUPPORT		= BIT(25),
+	IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD	= BIT(26),
+	IWL_UCODE_TLV_FLAGS_BCAST_FILTERING	= BIT(29),
+	IWL_UCODE_TLV_FLAGS_GO_UAPSD		= BIT(30),
+};
+
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification
+ * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
+ * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA.
+ * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit.
+ * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API.
+ * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif.
+ * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
+ *	longer than the passive one, which is essential for fragmented scan.
+ */
+enum iwl_ucode_tlv_api {
+	IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID	= BIT(0),
+	IWL_UCODE_TLV_CAPA_EXTENDED_BEACON	= BIT(1),
+	IWL_UCODE_TLV_API_BT_COEX_SPLIT         = BIT(3),
+	IWL_UCODE_TLV_API_CSA_FLOW		= BIT(4),
+	IWL_UCODE_TLV_API_DISABLE_STA_TX	= BIT(5),
+	IWL_UCODE_TLV_API_LMAC_SCAN		= BIT(6),
+	IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF	= BIT(7),
+	IWL_UCODE_TLV_API_FRAGMENTED_SCAN	= BIT(8),
+};
+
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
+ * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
+ * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
+ * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
+ *	tx power value into TPC Report action frame and Link Measurement Report
+ *	action frame
+ * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
+ *	channel in DS parameter set element in probe requests.
+ * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
+ *	probe requests.
+ * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
+ * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
+ *	which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
+ */
+enum iwl_ucode_tlv_capa {
+	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT			= BIT(0),
+	IWL_UCODE_TLV_CAPA_LAR_SUPPORT			= BIT(1),
+	IWL_UCODE_TLV_CAPA_UMAC_SCAN			= BIT(2),
+	IWL_UCODE_TLV_CAPA_TDLS_SUPPORT			= BIT(6),
+	IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT	= BIT(8),
+	IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT	= BIT(9),
+	IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT	= BIT(10),
+	IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT		= BIT(11),
+	IWL_UCODE_TLV_CAPA_DQA_SUPPORT			= BIT(12),
+	IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH		= BIT(13),
+	IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT		= BIT(18),
+};
+
+/* The default calibrate table size if not specified by firmware file */
+#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE	18
+#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE		19
+#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE			253
+
+/* The default max probe length if not specified by the firmware file */
+#define IWL_DEFAULT_MAX_PROBE_LENGTH	200
+
+/*
+ * For 16.0 uCode and above, there is no differentiation between sections,
+ * just an offset to the HW address.
+ */
+#define IWL_UCODE_SECTION_MAX 12
+#define IWL_API_ARRAY_SIZE	1
+#define IWL_CAPABILITIES_ARRAY_SIZE	1
+#define CPU1_CPU2_SEPARATOR_SECTION	0xFFFFCCCC
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver)	(((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver)	(((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver)	(((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver)	((ver) & 0x000000FF)
+
+/*
+ * Calibration control struct.
+ * Sent as part of the phy configuration command.
+ * @flow_trigger: bitmap for which calibrations to perform according to
+ *		flow triggers.
+ * @event_trigger: bitmap for which calibrations to perform according to
+ *		event triggers.
+ */
+struct iwl_tlv_calib_ctrl {
+	__le32 flow_trigger;
+	__le32 event_trigger;
+} __packed;
+
+enum iwl_fw_phy_cfg {
+	FW_PHY_CFG_RADIO_TYPE_POS = 0,
+	FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
+	FW_PHY_CFG_RADIO_STEP_POS = 2,
+	FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
+	FW_PHY_CFG_RADIO_DASH_POS = 4,
+	FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
+	FW_PHY_CFG_TX_CHAIN_POS = 16,
+	FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
+	FW_PHY_CFG_RX_CHAIN_POS = 20,
+	FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+};
+
+#define IWL_UCODE_MAX_CS		1
+
+/**
+ * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
+ * @cipher: a cipher suite selector
+ * @flags: cipher scheme flags (currently reserved for a future use)
+ * @hdr_len: a size of MPDU security header
+ * @pn_len: a size of PN
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: bit shift needed to get key_idx
+ * @mic_len: mic length in bytes
+ * @hw_cipher: a HW cipher index used in host commands
+ */
+struct iwl_fw_cipher_scheme {
+	__le32 cipher;
+	u8 flags;
+	u8 hdr_len;
+	u8 pn_len;
+	u8 pn_off;
+	u8 key_idx_off;
+	u8 key_idx_mask;
+	u8 key_idx_shift;
+	u8 mic_len;
+	u8 hw_cipher;
+} __packed;
+
+enum iwl_fw_dbg_reg_operator {
+	CSR_ASSIGN,
+	CSR_SETBIT,
+	CSR_CLEARBIT,
+
+	PRPH_ASSIGN,
+	PRPH_SETBIT,
+	PRPH_CLEARBIT,
+};
+
+/**
+ * struct iwl_fw_dbg_reg_op - an operation on a register
+ *
+ * @op: %enum iwl_fw_dbg_reg_operator
+ * @addr: offset of the register
+ * @val: value
+ */
+struct iwl_fw_dbg_reg_op {
+	u8 op;
+	u8 reserved[3];
+	__le32 addr;
+	__le32 val;
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
+ *
+ * @SMEM_MODE: monitor stores the data in SMEM
+ * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
+ * @MARBH_MODE: monitor stores the data in MARBH buffer
+ */
+enum iwl_fw_dbg_monitor_mode {
+	SMEM_MODE = 0,
+	EXTERNAL_MODE = 1,
+	MARBH_MODE = 2,
+};
+
+/**
+ * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
+ *
+ * @version: version of the TLV - currently 0
+ * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
+ * @base_reg: addr of the base addr register (PRPH)
+ * @end_reg:  addr of the end addr register (PRPH)
+ * @write_ptr_reg: the addr of the reg of the write pointer
+ * @wrap_count: the addr of the reg of the wrap_count
+ * @base_shift: shift right of the base addr reg
+ * @end_shift: shift right of the end addr reg
+ * @reg_ops: array of registers operations
+ *
+ * This parses IWL_UCODE_TLV_FW_DBG_DEST
+ */
+struct iwl_fw_dbg_dest_tlv {
+	u8 version;
+	u8 monitor_mode;
+	u8 reserved[2];
+	__le32 base_reg;
+	__le32 end_reg;
+	__le32 write_ptr_reg;
+	__le32 wrap_count;
+	u8 base_shift;
+	u8 end_shift;
+	struct iwl_fw_dbg_reg_op reg_ops[0];
+} __packed;
+
+struct iwl_fw_dbg_conf_hcmd {
+	u8 id;
+	u8 reserved;
+	__le16 len;
+	u8 data[0];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger - a TLV that describes a debug configuration
+ *
+ * @enabled: is this trigger enabled
+ * @reserved:
+ * @len: length, in bytes, of the %trigger field
+ * @trigger: pointer to a trigger struct
+ */
+struct iwl_fw_dbg_trigger {
+	u8 enabled;
+	u8 reserved;
+	u8 len;
+	u8 trigger[0];
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_conf - configurations available
+ *
+ * @FW_DBG_CUSTOM: take this configuration from alive
+ *	Note that the trigger is NO-OP for this configuration
+ */
+enum iwl_fw_dbg_conf {
+	FW_DBG_CUSTOM = 0,
+
+	/* must be last */
+	FW_DBG_MAX,
+	FW_DBG_INVALID = 0xff,
+};
+
+/**
+ * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration
+ *
+ * @id: %enum iwl_fw_dbg_conf
+ * @usniffer: should the uSniffer image be used
+ * @num_of_hcmds: how many HCMDs to send are present here
+ * @hcmd: a variable length host command to be sent to apply the configuration.
+ *	If there is more than one HCMD to send, they will appear one after the
+ *	other and be sent in the order that they appear in.
+ * This parses IWL_UCODE_TLV_FW_DBG_CONF
+ */
+struct iwl_fw_dbg_conf_tlv {
+	u8 id;
+	u8 usniffer;
+	u8 reserved;
+	u8 num_of_hcmds;
+	struct iwl_fw_dbg_conf_hcmd hcmd;
+
+	/* struct iwl_fw_dbg_trigger sits after all variable length hcmds */
+} __packed;
+
 #endif  /* __iwl_fw_file_h__ */