iwlwifi: move under intel vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 0 insertions, 271 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/drivers/net/wireless/iwlwifi/iwl-op-mode.h
deleted file mode 100644
index 2a58d6833224..000000000000
--- a/drivers/net/wireless/iwlwifi/iwl-op-mode.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
- * Copyright(c) 2015        Intel Deutschland GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
- * Copyright(c) 2015        Intel Deutschland GmbH
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_op_mode_h__
-#define __iwl_op_mode_h__
-
-#include <linux/netdevice.h>
-#include <linux/debugfs.h>
-
-struct iwl_op_mode;
-struct iwl_trans;
-struct sk_buff;
-struct iwl_device_cmd;
-struct iwl_rx_cmd_buffer;
-struct iwl_fw;
-struct iwl_cfg;
-
-/**
- * DOC: Operational mode - what is it ?
- *
- * The operational mode (a.k.a. op_mode) is the layer that implements
- * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses
- * the transport API to access the HW. The op_mode doesn't need to know how the
- * underlying HW works, since the transport layer takes care of that.
- *
- * There can be several op_mode: i.e. different fw APIs will require two
- * different op_modes. This is why the op_mode is virtualized.
- */
-
-/**
- * DOC: Life cycle of the Operational mode
- *
- * The operational mode has a very simple life cycle.
- *
- *	1) The driver layer (iwl-drv.c) chooses the op_mode based on the
- *	   capabilities advertised by the fw file (in TLV format).
- *	2) The driver layer starts the op_mode (ops->start)
- *	3) The op_mode registers mac80211
- *	4) The op_mode is governed by mac80211
- *	5) The driver layer stops the op_mode
- */
-
-/**
- * struct iwl_op_mode_ops - op_mode specific operations
- *
- * The op_mode exports its ops so that external components can start it and
- * interact with it. The driver layer typically calls the start and stop
- * handlers, the transport layer calls the others.
- *
- * All the handlers MUST be implemented, except @rx_rss which can be left
- * out *iff* the opmode will never run on hardware with multi-queue capability.
- *
- * @start: start the op_mode. The transport layer is already allocated.
- *	May sleep
- * @stop: stop the op_mode. Must free all the memory allocated.
- *	May sleep
- * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the
- *	HCMD this Rx responds to. Can't sleep.
- * @rx_rss: data queue RX notification to the op_mode, for (data) notifications
- *	received on the RSS queue(s). The queue parameter indicates which of the
- *	RSS queues received this frame; it will always be non-zero.
- *	This method must not sleep.
- * @queue_full: notifies that a HW queue is full.
- *	Must be atomic and called with BH disabled.
- * @queue_not_full: notifies that a HW queue is not full any more.
- *	Must be atomic and called with BH disabled.
- * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that
- *	the radio is killed. Return %true if the device should be stopped by
- *	the transport immediately after the call. May sleep.
- * @free_skb: allows the transport layer to free skbs that haven't been
- *	reclaimed by the op_mode. This can happen when the driver is freed and
- *	there are Tx packets pending in the transport layer.
- *	Must be atomic
- * @nic_error: error notification. Must be atomic and must be called with BH
- *	disabled.
- * @cmd_queue_full: Called when the command queue gets full. Must be atomic and
- *	called with BH disabled.
- * @nic_config: configure NIC, called before firmware is started.
- *	May sleep
- * @wimax_active: invoked when WiMax becomes active. May sleep
- * @enter_d0i3: configure the fw to enter d0i3. return 1 to indicate d0i3
- *	entrance is aborted (e.g. due to held reference). May sleep.
- * @exit_d0i3: configure the fw to exit d0i3. May sleep.
- */
-struct iwl_op_mode_ops {
-	struct iwl_op_mode *(*start)(struct iwl_trans *trans,
-				     const struct iwl_cfg *cfg,
-				     const struct iwl_fw *fw,
-				     struct dentry *dbgfs_dir);
-	void (*stop)(struct iwl_op_mode *op_mode);
-	void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi,
-		   struct iwl_rx_cmd_buffer *rxb);
-	void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi,
-		       struct iwl_rx_cmd_buffer *rxb, unsigned int queue);
-	void (*queue_full)(struct iwl_op_mode *op_mode, int queue);
-	void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue);
-	bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state);
-	void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb);
-	void (*nic_error)(struct iwl_op_mode *op_mode);
-	void (*cmd_queue_full)(struct iwl_op_mode *op_mode);
-	void (*nic_config)(struct iwl_op_mode *op_mode);
-	void (*wimax_active)(struct iwl_op_mode *op_mode);
-	int (*enter_d0i3)(struct iwl_op_mode *op_mode);
-	int (*exit_d0i3)(struct iwl_op_mode *op_mode);
-};
-
-int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops);
-void iwl_opmode_deregister(const char *name);
-
-/**
- * struct iwl_op_mode - operational mode
- * @ops: pointer to its own ops
- *
- * This holds an implementation of the mac80211 / fw API.
- */
-struct iwl_op_mode {
-	const struct iwl_op_mode_ops *ops;
-
-	char op_mode_specific[0] __aligned(sizeof(void *));
-};
-
-static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode)
-{
-	might_sleep();
-	op_mode->ops->stop(op_mode);
-}
-
-static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode,
-				  struct napi_struct *napi,
-				  struct iwl_rx_cmd_buffer *rxb)
-{
-	return op_mode->ops->rx(op_mode, napi, rxb);
-}
-
-static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode,
-				      struct napi_struct *napi,
-				      struct iwl_rx_cmd_buffer *rxb,
-				      unsigned int queue)
-{
-	op_mode->ops->rx_rss(op_mode, napi, rxb, queue);
-}
-
-static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode,
-					  int queue)
-{
-	op_mode->ops->queue_full(op_mode, queue);
-}
-
-static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode,
-					      int queue)
-{
-	op_mode->ops->queue_not_full(op_mode, queue);
-}
-
-static inline bool __must_check
-iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state)
-{
-	might_sleep();
-	return op_mode->ops->hw_rf_kill(op_mode, state);
-}
-
-static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode,
-					struct sk_buff *skb)
-{
-	op_mode->ops->free_skb(op_mode, skb);
-}
-
-static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode)
-{
-	op_mode->ops->nic_error(op_mode);
-}
-
-static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode)
-{
-	op_mode->ops->cmd_queue_full(op_mode);
-}
-
-static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode)
-{
-	might_sleep();
-	op_mode->ops->nic_config(op_mode);
-}
-
-static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode)
-{
-	might_sleep();
-	op_mode->ops->wimax_active(op_mode);
-}
-
-static inline int iwl_op_mode_enter_d0i3(struct iwl_op_mode *op_mode)
-{
-	might_sleep();
-
-	if (!op_mode->ops->enter_d0i3)
-		return 0;
-	return op_mode->ops->enter_d0i3(op_mode);
-}
-
-static inline int iwl_op_mode_exit_d0i3(struct iwl_op_mode *op_mode)
-{
-	might_sleep();
-
-	if (!op_mode->ops->exit_d0i3)
-		return 0;
-	return op_mode->ops->exit_d0i3(op_mode);
-}
-
-#endif /* __iwl_op_mode_h__ */