orinoco: initiate cfg80211 conversion

Initialise and register a wiphy.

Store the orinoco_private structure in the new wiphy, and use the
net_device private area to store the wireless_dev. This results in a
change to the way we navigate from a net_device to the driver private
orinoco_private, which we encapsulate in the inline function ndev_priv.
Most of the remaining calls to netdev_priv are thus replaced by
ndev_priv.

We can immediately rely on cfg80211 to handle SIOCGIWNAME, so
orinoco_ioctl_getname is removed.

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 98 insertions, 0 deletions

diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
new file mode 100644
index 000000000000..9a616ddac091
--- /dev/null
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -0,0 +1,98 @@
+/* cfg80211 support
+ *
+ * See copyright notice in main.c
+ */
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "hw.h"
+#include "main.h"
+#include "orinoco.h"
+
+#include "cfg.h"
+
+/* Supported bitrates. Must agree with hw.c */
+static struct ieee80211_rate orinoco_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20 },
+	{ .bitrate = 55 },
+	{ .bitrate = 110 },
+};
+
+static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid;
+
+/* Called after orinoco_private is allocated. */
+void orinoco_wiphy_init(struct wiphy *wiphy)
+{
+	struct orinoco_private *priv = wiphy_priv(wiphy);
+
+	wiphy->privid = orinoco_wiphy_privid;
+
+	set_wiphy_dev(wiphy, priv->dev);
+}
+
+/* Called after firmware is initialised */
+int orinoco_wiphy_register(struct wiphy *wiphy)
+{
+	struct orinoco_private *priv = wiphy_priv(wiphy);
+	int i, channels = 0;
+
+	if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+		wiphy->max_scan_ssids = 1;
+	else
+		wiphy->max_scan_ssids = 0;
+
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+	/* TODO: should we set if we only have demo ad-hoc?
+	 *       (priv->has_port3)
+	 */
+	if (priv->has_ibss)
+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+
+	if (!priv->broken_monitor || force_monitor)
+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+
+	priv->band.bitrates = orinoco_rates;
+	priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates);
+
+	/* Only support channels allowed by the card EEPROM */
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (priv->channel_mask & (1 << i)) {
+			priv->channels[i].center_freq =
+				ieee80211_dsss_chan_to_freq(i+1);
+			channels++;
+		}
+	}
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = channels;
+
+	wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+	i = 0;
+	if (priv->has_wep) {
+		priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40;
+		i++;
+
+		if (priv->has_big_wep) {
+			priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104;
+			i++;
+		}
+	}
+	if (priv->has_wpa) {
+		priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP;
+		i++;
+	}
+	wiphy->cipher_suites = priv->cipher_suites;
+	wiphy->n_cipher_suites = i;
+
+	wiphy->rts_threshold = priv->rts_thresh;
+	if (!priv->has_mwo)
+		wiphy->frag_threshold = priv->frag_thresh;
+
+	return wiphy_register(wiphy);
+}
+
+const struct cfg80211_ops orinoco_cfg_ops = {
+
+};