Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

1 files changed, 105 insertions, 0 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index f85deda703fb..99d37e3efba6 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -69,11 +69,15 @@ struct qlink_msg_header {
  *	associated STAs due to inactivity. Inactivity timeout period is taken
  *	from QLINK_CMD_START_AP parameters.
  * @QLINK_HW_CAPAB_DFS_OFFLOAD: device implements DFS offload functionality
+ * @QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR: device supports MAC Address
+ *	Randomization in probe requests.
  */
 enum qlink_hw_capab {
 	QLINK_HW_CAPAB_REG_UPDATE		= BIT(0),
 	QLINK_HW_CAPAB_STA_INACT_TIMEOUT	= BIT(1),
 	QLINK_HW_CAPAB_DFS_OFFLOAD		= BIT(2),
+	QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR	= BIT(3),
+	QLINK_HW_CAPAB_PWR_MGMT			= BIT(4),
 };
 
 enum qlink_iface_type {
@@ -253,6 +257,8 @@ enum qlink_cmd_type {
 	QLINK_CMD_CHAN_STATS		= 0x0054,
 	QLINK_CMD_CONNECT		= 0x0060,
 	QLINK_CMD_DISCONNECT		= 0x0061,
+	QLINK_CMD_PM_SET		= 0x0062,
+	QLINK_CMD_WOWLAN_SET		= 0x0063,
 };
 
 /**
@@ -665,6 +671,54 @@ struct qlink_acl_data {
 	struct qlink_mac_address mac_addrs[0];
 } __packed;
 
+/**
+ * enum qlink_pm_mode - Power Management mode
+ *
+ * @QLINK_PM_OFF: normal mode, no power saving enabled
+ * @QLINK_PM_AUTO_STANDBY: enable auto power save mode
+ */
+enum qlink_pm_mode {
+	QLINK_PM_OFF		= 0,
+	QLINK_PM_AUTO_STANDBY	= 1,
+};
+
+/**
+ * struct qlink_cmd_pm_set - data for QLINK_CMD_PM_SET command
+ *
+ * @pm_standby timer: period of network inactivity in seconds before
+ *	putting a radio in power save mode
+ * @pm_mode: power management mode
+ */
+struct qlink_cmd_pm_set {
+	struct qlink_cmd chdr;
+	__le32 pm_standby_timer;
+	u8 pm_mode;
+} __packed;
+
+/**
+ * enum qlink_wowlan_trigger
+ *
+ * @QLINK_WOWLAN_TRIG_DISCONNECT: wakeup on disconnect
+ * @QLINK_WOWLAN_TRIG_MAGIC_PKT: wakeup on magic packet
+ * @QLINK_WOWLAN_TRIG_PATTERN_PKT: wakeup on user-defined packet
+ */
+enum qlink_wowlan_trigger {
+	QLINK_WOWLAN_TRIG_DISCONNECT	= BIT(0),
+	QLINK_WOWLAN_TRIG_MAGIC_PKT	= BIT(1),
+	QLINK_WOWLAN_TRIG_PATTERN_PKT	= BIT(2),
+};
+
+/**
+ * struct qlink_cmd_wowlan_set - data for QLINK_CMD_WOWLAN_SET command
+ *
+ * @triggers: requested bitmask of WoWLAN triggers
+ */
+struct qlink_cmd_wowlan_set {
+	struct qlink_cmd chdr;
+	__le32 triggers;
+	u8 data[0];
+} __packed;
+
 /* QLINK Command Responses messages related definitions
  */
 
@@ -1062,6 +1116,8 @@ struct qlink_event_radar {
  * @QTN_TLV_ID_STA_STATS: per-STA statistics as defined by
  *	&struct qlink_sta_stats. Valid values are marked as such in a bitmap
  *	carried by QTN_TLV_ID_STA_STATS_MAP.
+ * @QTN_TLV_ID_MAX_SCAN_SSIDS: maximum number of SSIDs the device can scan
+ *	for in any given scan.
  */
 enum qlink_tlv_id {
 	QTN_TLV_ID_FRAG_THRESH		= 0x0201,
@@ -1089,6 +1145,10 @@ enum qlink_tlv_id {
 	QTN_TLV_ID_HW_ID		= 0x0405,
 	QTN_TLV_ID_CALIBRATION_VER	= 0x0406,
 	QTN_TLV_ID_UBOOT_VER		= 0x0407,
+	QTN_TLV_ID_RANDOM_MAC_ADDR	= 0x0408,
+	QTN_TLV_ID_MAX_SCAN_SSIDS	= 0x0409,
+	QTN_TLV_ID_WOWLAN_CAPAB		= 0x0410,
+	QTN_TLV_ID_WOWLAN_PATTERN	= 0x0411,
 };
 
 struct qlink_tlv_hdr {
@@ -1360,4 +1420,49 @@ struct qlink_sta_stats {
 	u8 rsvd[1];
 };
 
+/**
+ * struct qlink_random_mac_addr - data for QTN_TLV_ID_RANDOM_MAC_ADDR TLV
+ *
+ * Specifies MAC address mask/value for generation random MAC address
+ * during scan.
+ *
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ *	are 0 in the mask should be randomised, bits that are 1 should
+ *	be taken from the @mac_addr
+ */
+struct qlink_random_mac_addr {
+	u8 mac_addr[ETH_ALEN];
+	u8 mac_addr_mask[ETH_ALEN];
+} __packed;
+
+/**
+ * struct qlink_wowlan_capab_data - data for QTN_TLV_ID_WOWLAN_CAPAB TLV
+ *
+ * WoWLAN capabilities supported by cards.
+ *
+ * @version: version of WoWLAN data structure, to ensure backward
+ *	compatibility for firmwares with limited WoWLAN support
+ * @len: Total length of WoWLAN data
+ * @data: supported WoWLAN features
+ */
+struct qlink_wowlan_capab_data {
+	__le16 version;
+	__le16 len;
+	u8 data[0];
+} __packed;
+
+/**
+ * struct qlink_wowlan_support - supported WoWLAN capabilities
+ *
+ * @n_patterns: number of supported wakeup patterns
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct qlink_wowlan_support {
+	__le32 n_patterns;
+	__le32 pattern_max_len;
+	__le32 pattern_min_len;
+} __packed;
+
 #endif /* _QTN_QLINK_H_ */