diff options
| author |   Gertjan van Wingerde <gwingerde@gmail.com> | 2010-06-03 10:51:59 +0200 |
|---|---|---|
| committer |   Ivo van Doorn <IvDoorn@gmail.com> | 2010-06-03 10:51:59 +0200 |
| commit | 785c3c06fb8f4bc3a8bb6ff39e8f6a70f889bde9 (patch) | |
| tree | 22688122ceed9c677835faf713b93060e2b41ca4 /drivers/net/wireless/rt2x00/rt2800.h | |
| parent | rt2x00: Remove RT2870 chipset identification. (diff) | |
| download | linux-dev-785c3c06fb8f4bc3a8bb6ff39e8f6a70f889bde9.tar.xz linux-dev-785c3c06fb8f4bc3a8bb6ff39e8f6a70f889bde9.zip | |
rt2x00: Move all register definitions for rt2800 to rt2800.h.
There is no point on having them separated across 3 files.
At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT
(as per the datasheet).
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800.h | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 35afe6376a4d..16bfaa8c4477 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -98,6 +98,21 @@ */ /* + * E2PROM_CSR: PCI EEPROM control register. + * RELOAD: Write 1 to reload eeprom content. + * TYPE: 0: 93c46, 1:93c66. + * LOAD_STATUS: 1:loading, 0:done. + */ +#define E2PROM_CSR 0x0004 +#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) +#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) +#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) +#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) +#define E2PROM_CSR_TYPE FIELD32(0x00000030) +#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) +#define E2PROM_CSR_RELOAD FIELD32(0x00000080) + +/* * OPT_14: Unknown register used by rt3xxx devices. */ #define OPT_14_CSR 0x0114 @@ -321,6 +336,39 @@ #define RX_DRX_IDX 0x029c /* + * USB_DMA_CFG + * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. + * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. + * PHY_CLEAR: phy watch dog enable. + * TX_CLEAR: Clear USB DMA TX path. + * TXOP_HALT: Halt TXOP count down when TX buffer is full. + * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. + * RX_BULK_EN: Enable USB DMA Rx. + * TX_BULK_EN: Enable USB DMA Tx. + * EP_OUT_VALID: OUT endpoint data valid. + * RX_BUSY: USB DMA RX FSM busy. + * TX_BUSY: USB DMA TX FSM busy. + */ +#define USB_DMA_CFG 0x02a0 +#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) +#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) +#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) +#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) +#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) +#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) +#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) +#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) +#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) +#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) +#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) + +/* + * US_CYC_CNT + */ +#define US_CYC_CNT 0x02a4 +#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) + +/* * PBF_SYS_CTRL * HOST_RAM_WRITE: enable Host program ram write selection */ |