rtlwifi: Update power-save routines for 062814 driver

Realtek released a new version of the drivers on 06/28/2014. This
patch implements the new power-save code. These changes also force
corresponding changes in the drivers.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 5 insertions, 66 deletions

diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
index 3bd41f958974..29dfc514212d 100644
--- a/drivers/net/wireless/rtlwifi/ps.h
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -11,10 +11,6 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
@@ -32,68 +28,9 @@
 
 #define MAX_SW_LPS_SLEEP_INTV	5
 
-/*---------------------------------------------
- * 3 The value of cmd: 4 bits
- *---------------------------------------------
- */
-#define    PWR_CMD_READ		0x00
-#define    PWR_CMD_WRITE	0x01
-#define    PWR_CMD_POLLING	0x02
-#define    PWR_CMD_DELAY	0x03
-#define    PWR_CMD_END		0x04
-
-/* define the base address of each block */
-#define	PWR_BASEADDR_MAC	0x00
-#define	PWR_BASEADDR_USB	0x01
-#define	PWR_BASEADDR_PCIE	0x02
-#define	PWR_BASEADDR_SDIO	0x03
-
-#define	PWR_FAB_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
-#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
-#define	PWR_CUT_A_MSK		BIT(1)
-#define	PWR_CUT_B_MSK		BIT(2)
-#define	PWR_CUT_C_MSK		BIT(3)
-#define	PWR_CUT_D_MSK		BIT(4)
-#define	PWR_CUT_E_MSK		BIT(5)
-#define	PWR_CUT_F_MSK		BIT(6)
-#define	PWR_CUT_G_MSK		BIT(7)
-#define	PWR_CUT_ALL_MSK		0xFF
-#define PWR_INTF_SDIO_MSK	BIT(0)
-#define PWR_INTF_USB_MSK	BIT(1)
-#define PWR_INTF_PCI_MSK	BIT(2)
-#define PWR_INTF_ALL_MSK	(BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-enum pwrseq_delay_unit {
-	PWRSEQ_DELAY_US,
-	PWRSEQ_DELAY_MS,
-};
-
-struct wlan_pwr_cfg {
-	u16 offset;
-	u8 cut_msk;
-	u8 fab_msk:4;
-	u8 interface_msk:4;
-	u8 base:4;
-	u8 cmd:4;
-	u8 msk;
-	u8 value;
-};
-
-#define	GET_PWR_CFG_OFFSET(__PWR_CMD)	(__PWR_CMD.offset)
-#define	GET_PWR_CFG_CUT_MASK(__PWR_CMD)	(__PWR_CMD.cut_msk)
-#define	GET_PWR_CFG_FAB_MASK(__PWR_CMD)	(__PWR_CMD.fab_msk)
-#define	GET_PWR_CFG_INTF_MASK(__PWR_CMD)	(__PWR_CMD.interface_msk)
-#define	GET_PWR_CFG_BASE(__PWR_CMD)	(__PWR_CMD.base)
-#define	GET_PWR_CFG_CMD(__PWR_CMD)	(__PWR_CMD.cmd)
-#define	GET_PWR_CFG_MASK(__PWR_CMD)	(__PWR_CMD.msk)
-#define	GET_PWR_CFG_VALUE(__PWR_CMD)	(__PWR_CMD.value)
-
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
-			      u8 fab_version, u8 interface_type,
-			      struct wlan_pwr_cfg pwrcfgcmd[]);
-
 bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
-			 enum rf_pwrstate state_toset, u32 changesource);
+			 enum rf_pwrstate state_toset, u32 changesource,
+			 bool protect_or_not);
 bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
 bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
 void rtl_ips_nic_off(struct ieee80211_hw *hw);
@@ -102,12 +39,14 @@ void rtl_ips_nic_off_wq_callback(void *data);
 void rtl_lps_enter(struct ieee80211_hw *hw);
 void rtl_lps_leave(struct ieee80211_hw *hw);
 
+void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode);
+
 void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len);
 void rtl_swlps_wq_callback(void *data);
 void rtl_swlps_rfon_wq_callback(void *data);
 void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
 void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
-void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
+void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state);
 void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
 void rtl_lps_change_work_callback(struct work_struct *work);