Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "This pull request is dedicated to the upcoming snowpocalypse parts 2
  and 3 in the Pacific Northwest:

   1) Drop profiles are broken because some drivers use dev_kfree_skb*
      instead of dev_consume_skb*, from Yang Wei.

   2) Fix IWLWIFI kconfig deps, from Luca Coelho.

   3) Fix percpu maps updating in bpftool, from Paolo Abeni.

   4) Missing station release in batman-adv, from Felix Fietkau.

   5) Fix some networking compat ioctl bugs, from Johannes Berg.

   6) ucc_geth must reset the BQL queue state when stopping the device,
      from Mathias Thore.

   7) Several XDP bug fixes in virtio_net from Toshiaki Makita.

   8) TSO packets must be sent always on queue 0 in stmmac, from Jose
      Abreu.

   9) Fix socket refcounting bug in RDS, from Eric Dumazet.

  10) Handle sparse cpu allocations in bpf selftests, from Martynas
      Pumputis.

  11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
      Feitkau.

  12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
      Greg Kroah-Hartman.

  13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
      ccid, from Eric Dumazet.

  14) Need to reload WoL password into bcmsysport device after deep
      sleeps, from Florian Fainelli.

  15) Remove filter from mask before freeing in cls_flower, from Petr
      Machata.

  16) Missing release and use after free in error paths of s390 qeth
      code, from Julian Wiedmann.

  17) Fix lockdep false positive in dsa code, from Marc Zyngier.

  18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.

  19) Fix EQ firmware assert in qed driver, from Manish Chopra.

  20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: dsa: b53: Fix for failure when irq is not defined in dt
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  net: Don't default Cavium PTP driver to 'y'
  net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net/mlx5e: Don't overwrite pedit action when multiple pedit used
  net/mlx5e: Update hw flows when encap source mac changed
  qed*: Advance drivers version to 8.37.0.20
  qed: Change verbosity for coalescing message.
  qede: Fix system crash on configuring channels.
  qed: Consider TX tcs while deriving the max num_queues for PF.
  ...

6 files changed, 35 insertions, 37 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 399b501f3c3c..e8891f5fc83a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -548,7 +548,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
 		.dev_id = 0,
-		.bus = ATH10K_BUS_PCI,
+		.bus = ATH10K_BUS_SNOC,
 		.name = "wcn3990 hw1.0",
 		.continuous_frag_desc = true,
 		.tx_chain_mask = 0x7,
diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 491ca3c8b43c..83d5bceea08f 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -1,6 +1,6 @@
 config IWLWIFI
 	tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) "
-	depends on PCI && HAS_IOMEM
+	depends on PCI && HAS_IOMEM && CFG80211
 	select FW_LOADER
 	---help---
 	  Select to build the driver supporting the:
@@ -47,6 +47,7 @@ if IWLWIFI
 config IWLWIFI_LEDS
 	bool
 	depends on LEDS_CLASS=y || LEDS_CLASS=IWLWIFI
+	depends on IWLMVM || IWLDVM
 	select LEDS_TRIGGERS
 	select MAC80211_LEDS
 	default y
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
index 497e762978cc..b2cabce1d74d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
@@ -212,24 +212,24 @@ void mt76x0_get_tx_power_per_rate(struct mt76x02_dev *dev)
 	mt76x02_add_rate_power_offset(t, delta);
 }
 
-void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info)
+void mt76x0_get_power_info(struct mt76x02_dev *dev, s8 *tp)
 {
 	struct mt76x0_chan_map {
 		u8 chan;
 		u8 offset;
 	} chan_map[] = {
-		{   2,  0 }, {   4,  1 }, {   6,  2 }, {   8,  3 },
-		{  10,  4 }, {  12,  5 }, {  14,  6 }, {  38,  0 },
-		{  44,  1 }, {  48,  2 }, {  54,  3 }, {  60,  4 },
-		{  64,  5 }, { 102,  6 }, { 108,  7 }, { 112,  8 },
-		{ 118,  9 }, { 124, 10 }, { 128, 11 }, { 134, 12 },
-		{ 140, 13 }, { 151, 14 }, { 157, 15 }, { 161, 16 },
-		{ 167, 17 }, { 171, 18 }, { 173, 19 },
+		{   2,  0 }, {   4,  2 }, {   6,  4 }, {   8,  6 },
+		{  10,  8 }, {  12, 10 }, {  14, 12 }, {  38,  0 },
+		{  44,  2 }, {  48,  4 }, {  54,  6 }, {  60,  8 },
+		{  64, 10 }, { 102, 12 }, { 108, 14 }, { 112, 16 },
+		{ 118, 18 }, { 124, 20 }, { 128, 22 }, { 134, 24 },
+		{ 140, 26 }, { 151, 28 }, { 157, 30 }, { 161, 32 },
+		{ 167, 34 }, { 171, 36 }, { 175, 38 },
 	};
 	struct ieee80211_channel *chan = dev->mt76.chandef.chan;
 	u8 offset, addr;
+	int i, idx = 0;
 	u16 data;
-	int i;
 
 	if (mt76x0_tssi_enabled(dev)) {
 		s8 target_power;
@@ -239,14 +239,14 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info)
 		else
 			data = mt76x02_eeprom_get(dev, MT_EE_2G_TARGET_POWER);
 		target_power = (data & 0xff) - dev->mt76.rate_power.ofdm[7];
-		info[0] = target_power + mt76x0_get_delta(dev);
-		info[1] = 0;
+		*tp = target_power + mt76x0_get_delta(dev);
 
 		return;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(chan_map); i++) {
-		if (chan_map[i].chan <= chan->hw_value) {
+		if (chan->hw_value <= chan_map[i].chan) {
+			idx = (chan->hw_value == chan_map[i].chan);
 			offset = chan_map[i].offset;
 			break;
 		}
@@ -258,13 +258,16 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info)
 		addr = MT_EE_TX_POWER_DELTA_BW80 + offset;
 	} else {
 		switch (chan->hw_value) {
+		case 42:
+			offset = 2;
+			break;
 		case 58:
 			offset = 8;
 			break;
 		case 106:
 			offset = 14;
 			break;
-		case 112:
+		case 122:
 			offset = 20;
 			break;
 		case 155:
@@ -277,14 +280,9 @@ void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info)
 	}
 
 	data = mt76x02_eeprom_get(dev, addr);
-
-	info[0] = data;
-	if (!info[0] || info[0] > 0x3f)
-		info[0] = 5;
-
-	info[1] = data >> 8;
-	if (!info[1] || info[1] > 0x3f)
-		info[1] = 5;
+	*tp = data >> (8 * idx);
+	if (*tp < 0 || *tp > 0x3f)
+		*tp = 5;
 }
 
 static int mt76x0_check_eeprom(struct mt76x02_dev *dev)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
index ee9ade9f3c8b..42b259f90b6d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
@@ -26,7 +26,7 @@ struct mt76x02_dev;
 int mt76x0_eeprom_init(struct mt76x02_dev *dev);
 void mt76x0_read_rx_gain(struct mt76x02_dev *dev);
 void mt76x0_get_tx_power_per_rate(struct mt76x02_dev *dev);
-void mt76x0_get_power_info(struct mt76x02_dev *dev, u8 *info);
+void mt76x0_get_power_info(struct mt76x02_dev *dev, s8 *tp);
 
 static inline s8 s6_to_s8(u32 val)
 {
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index 1eb1a802ed20..b6166703ad76 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -845,17 +845,17 @@ static void mt76x0_phy_tssi_calibrate(struct mt76x02_dev *dev)
 void mt76x0_phy_set_txpower(struct mt76x02_dev *dev)
 {
 	struct mt76_rate_power *t = &dev->mt76.rate_power;
-	u8 info[2];
+	s8 info;
 
 	mt76x0_get_tx_power_per_rate(dev);
-	mt76x0_get_power_info(dev, info);
+	mt76x0_get_power_info(dev, &info);
 
-	mt76x02_add_rate_power_offset(t, info[0]);
+	mt76x02_add_rate_power_offset(t, info);
 	mt76x02_limit_rate_power(t, dev->mt76.txpower_conf);
 	dev->mt76.txpower_cur = mt76x02_get_max_rate_power(t);
-	mt76x02_add_rate_power_offset(t, -info[0]);
+	mt76x02_add_rate_power_offset(t, -info);
 
-	mt76x02_phy_set_txpower(dev, info[0], info[1]);
+	mt76x02_phy_set_txpower(dev, info, info);
 }
 
 void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index bd10165d7eec..4d4b07701149 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -164,6 +164,12 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
 	}
 
 	sdio_claim_host(func);
+	/*
+	 * To guarantee that the SDIO card is power cycled, as required to make
+	 * the FW programming to succeed, let's do a brute force HW reset.
+	 */
+	mmc_hw_reset(card->host);
+
 	sdio_enable_func(func);
 	sdio_release_host(func);
 
@@ -174,20 +180,13 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
 {
 	struct sdio_func *func = dev_to_sdio_func(glue->dev);
 	struct mmc_card *card = func->card;
-	int error;
 
 	sdio_claim_host(func);
 	sdio_disable_func(func);
 	sdio_release_host(func);
 
 	/* Let runtime PM know the card is powered off */
-	error = pm_runtime_put(&card->dev);
-	if (error < 0 && error != -EBUSY) {
-		dev_err(&card->dev, "%s failed: %i\n", __func__, error);
-
-		return error;
-	}
-
+	pm_runtime_put(&card->dev);
 	return 0;
 }