diff options
| author |   Jean-Philippe Brucker <jean-philippe@linaro.org> | 2019-12-26 10:20:33 +0100 |
|---|---|---|
| committer |   Kalle Valo <kvalo@codeaurora.org> | 2020-01-26 17:41:18 +0200 |
| commit | 8c8e60fb86a90a30721bbd797f58f96b3980dcc1 (patch) | |
| tree | 0682ffeb4ba09b32d1457889561b232dfb677807 /drivers/net/wireless | |
| parent | brcmfmac: use true,false for bool variable (diff) | |
| download | linux-dev-8c8e60fb86a90a30721bbd797f58f96b3980dcc1.tar.xz linux-dev-8c8e60fb86a90a30721bbd797f58f96b3980dcc1.zip | |
brcmfmac: sdio: Fix OOB interrupt initialization on brcm43362
Commit 262f2b53f679 ("brcmfmac: call brcmf_attach() just before calling
brcmf_bus_started()") changed the initialization order of the brcmfmac
SDIO driver. Unfortunately since brcmf_sdiod_intr_register() is now
called before the sdiodev->bus_if initialization, it reads the wrong
chip ID and fails to initialize the GPIO on brcm43362. Thus the chip
cannot send interrupts and fails to probe:
[ 12.517023] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 12.531214] ieee80211 phy0: brcmf_bus_started: failed: -110
[ 12.536976] ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
[ 12.566467] brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
Initialize the bus interface earlier to ensure that
brcmf_sdiod_intr_register() properly sets up the OOB interrupt.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
Fixes: 262f2b53f679 ("brcmfmac: call brcmf_attach() just before calling brcmf_bus_started()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index f9df95bc7fa1..f9047db6a11d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4243,6 +4243,12 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, } if (err == 0) { + /* Assign bus interface call back */ + sdiod->bus_if->dev = sdiod->dev; + sdiod->bus_if->ops = &brcmf_sdio_bus_ops; + sdiod->bus_if->chip = bus->ci->chip; + sdiod->bus_if->chiprev = bus->ci->chiprev; + /* Allow full data communication using DPC from now on. */ brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA); @@ -4259,12 +4265,6 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, sdio_release_host(sdiod->func1); - /* Assign bus interface call back */ - sdiod->bus_if->dev = sdiod->dev; - sdiod->bus_if->ops = &brcmf_sdio_bus_ops; - sdiod->bus_if->chip = bus->ci->chip; - sdiod->bus_if->chiprev = bus->ci->chiprev; - err = brcmf_alloc(sdiod->dev, sdiod->settings); if (err) { brcmf_err("brcmf_alloc failed\n"); |