Merge tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
  contains fixes for a WiFi driver, which device is attached to the SDIO
  interface. Patches for the WiFi driver have been acked by the
  corresponding maintainers.

  Summary:

  MMC core:
   - Make switch to eMMC HS400 more robust for some controllers
   - Add two SDIO func API to manage re-tuning constraints
   - Prevent processing SDIO IRQs when the card is suspended

  MMC host:
   - sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
   - mtk-sd: Fixup support for SDIO IRQs
   - sdhci-pci-o2micro: Fixup support for tuning

  Wireless BRCMFMAC (SDIO):
   - Deal with expected transmission errors related to the idle states
     (handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
     on rk3288-veyron-minnie, rk3288-veyron-speedy and
     rk3288-veyron-mickey"

* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Prevent processing SDIO IRQs when the card is suspended
  mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
  brcmfmac: sdio: Don't tune while the card is off
  mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
  brcmfmac: sdio: Disable auto-tuning around commands expected to fail
  mmc: core: API to temporarily disable retuning for SDIO CRC errors
  Revert "brcmfmac: disable command decode in sdio_aos"
  mmc: mediatek: fix SDIO IRQ detection issue
  mmc: mediatek: fix SDIO IRQ interrupt handle flow
  mmc: core: complete HS400 before checking status
  mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H

1 files changed, 12 insertions, 5 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 22b73da42822..9a51f1ba87c3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -678,6 +678,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+	sdio_retune_crc_disable(bus->sdiodev->func1);
+
+	/* Cannot re-tune if device is asleep; defer till we're awake */
+	if (on)
+		sdio_retune_hold_now(bus->sdiodev->func1);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -738,6 +744,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	if (on)
+		sdio_retune_release(bus->sdiodev->func1);
+
+	sdio_retune_crc_enable(bus->sdiodev->func1);
+
 	return err;
 }
 
@@ -3375,11 +3386,7 @@ err:
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
-	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
-	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
 		return true;
 	else
 		return false;