Merge branch 'realtek-phy-next'

Heiner Kallweit says:

====================
net: phy: realtek: add support for integrated 2.5Gbps PHY in RTL8125

This series adds support for the integrated 2.5Gbps PHY in RTL8125.
First three patches add necessary functionality to phylib.

Changes in v2:
- added patch 1
- changed patch 4 to use a fake PHY ID that is injected by the
  network driver. This allows to use a dedicated PHY driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 104 insertions, 36 deletions

diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 16667fbac8bf..9ae3abb2daca 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -783,24 +783,43 @@ int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val)
 EXPORT_SYMBOL(phy_write_paged);
 
 /**
- * phy_modify_paged() - Convenience function for modifying a paged register
+ * phy_modify_paged_changed() - Function for modifying a paged register
  * @phydev: a pointer to a &struct phy_device
  * @page: the page for the phy
  * @regnum: register number
  * @mask: bit mask of bits to clear
  * @set: bit mask of bits to set
  *
- * Same rules as for phy_read() and phy_write().
+ * Returns negative errno, 0 if there was no change, and 1 in case of change
  */
-int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
-		     u16 mask, u16 set)
+int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum,
+			     u16 mask, u16 set)
 {
 	int ret = 0, oldpage;
 
 	oldpage = phy_select_page(phydev, page);
 	if (oldpage >= 0)
-		ret = __phy_modify(phydev, regnum, mask, set);
+		ret = __phy_modify_changed(phydev, regnum, mask, set);
 
 	return phy_restore_page(phydev, oldpage, ret);
 }
+EXPORT_SYMBOL(phy_modify_paged_changed);
+
+/**
+ * phy_modify_paged() - Convenience function for modifying a paged register
+ * @phydev: a pointer to a &struct phy_device
+ * @page: the page for the phy
+ * @regnum: register number
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * Same rules as for phy_read() and phy_write().
+ */
+int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
+		     u16 mask, u16 set)
+{
+	int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
+
+	return ret < 0 ? ret : 0;
+}
 EXPORT_SYMBOL(phy_modify_paged);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7ddd91df99e3..b039632de73a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1564,24 +1564,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable);
  */
 static int genphy_config_advert(struct phy_device *phydev)
 {
-	u32 advertise;
-	int bmsr, adv;
-	int err, changed = 0;
+	int err, bmsr, changed = 0;
+	u32 adv;
 
 	/* Only allow advertising what this PHY supports */
 	linkmode_and(phydev->advertising, phydev->advertising,
 		     phydev->supported);
-	if (!ethtool_convert_link_mode_to_legacy_u32(&advertise,
-						     phydev->advertising))
-		phydev_warn(phydev, "PHY advertising (%*pb) more modes than genphy supports, some modes not advertised.\n",
-			    __ETHTOOL_LINK_MODE_MASK_NBITS,
-			    phydev->advertising);
+
+	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
 
 	/* Setup standard advertisement */
 	err = phy_modify_changed(phydev, MII_ADVERTISE,
 				 ADVERTISE_ALL | ADVERTISE_100BASE4 |
 				 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-				 ethtool_adv_to_mii_adv_t(advertise));
+				 adv);
 	if (err < 0)
 		return err;
 	if (err > 0)
@@ -1598,13 +1594,7 @@ static int genphy_config_advert(struct phy_device *phydev)
 	if (!(bmsr & BMSR_ESTATEN))
 		return changed;
 
-	/* Configure gigabit if it's supported */
-	adv = 0;
-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-			      phydev->supported) ||
-	    linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-			      phydev->supported))
-		adv = ethtool_adv_to_mii_ctrl1000_t(advertise);
+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
 
 	err = phy_modify_changed(phydev, MII_CTRL1000,
 				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
@@ -1681,18 +1671,20 @@ int genphy_restart_aneg(struct phy_device *phydev)
 EXPORT_SYMBOL(genphy_restart_aneg);
 
 /**
- * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * __genphy_config_aneg - restart auto-negotiation or write BMCR
  * @phydev: target phy_device struct
+ * @changed: whether autoneg is requested
  *
  * Description: If auto-negotiation is enabled, we configure the
  *   advertising, and then restart auto-negotiation.  If it is not
  *   enabled, then we write the BMCR.
  */
-int genphy_config_aneg(struct phy_device *phydev)
+int __genphy_config_aneg(struct phy_device *phydev, bool changed)
 {
-	int err, changed;
+	int err;
 
-	changed = genphy_config_eee_advert(phydev);
+	if (genphy_config_eee_advert(phydev))
+		changed = true;
 
 	if (AUTONEG_ENABLE != phydev->autoneg)
 		return genphy_setup_forced(phydev);
@@ -1700,10 +1692,10 @@ int genphy_config_aneg(struct phy_device *phydev)
 	err = genphy_config_advert(phydev);
 	if (err < 0) /* error */
 		return err;
+	else if (err)
+		changed = true;
 
-	changed |= err;
-
-	if (changed == 0) {
+	if (!changed) {
 		/* Advertisement hasn't changed, but maybe aneg was never on to
 		 * begin with?  Or maybe phy was isolated?
 		 */
@@ -1713,18 +1705,15 @@ int genphy_config_aneg(struct phy_device *phydev)
 			return ctl;
 
 		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
-			changed = 1; /* do restart aneg */
+			changed = true; /* do restart aneg */
 	}
 
 	/* Only restart aneg if we are advertising something different
 	 * than we were before.
 	 */
-	if (changed > 0)
-		return genphy_restart_aneg(phydev);
-
-	return 0;
+	return changed ? genphy_restart_aneg(phydev) : 0;
 }
-EXPORT_SYMBOL(genphy_config_aneg);
+EXPORT_SYMBOL(__genphy_config_aneg);
 
 /**
  * genphy_aneg_done - return auto-negotiation status
@@ -1811,8 +1800,6 @@ int genphy_read_status(struct phy_device *phydev)
 	phydev->pause = 0;
 	phydev->asym_pause = 0;
 
-	linkmode_zero(phydev->lp_advertising);
-
 	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		if (phydev->is_gigabit_capable) {
 			lpagb = phy_read(phydev, MII_STAT1000);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index a669945eb829..5b466e80d956 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -39,6 +39,11 @@
 #define RTL8366RB_POWER_SAVE			0x15
 #define RTL8366RB_POWER_SAVE_ON			BIT(12)
 
+#define RTL_ADV_2500FULL			BIT(7)
+#define RTL_LPADV_10000FULL			BIT(11)
+#define RTL_LPADV_5000FULL			BIT(6)
+#define RTL_LPADV_2500FULL			BIT(5)
+
 MODULE_DESCRIPTION("Realtek PHY driver");
 MODULE_AUTHOR("Johnson Leung");
 MODULE_LICENSE("GPL");
@@ -256,6 +261,53 @@ static int rtl8366rb_config_init(struct phy_device *phydev)
 	return ret;
 }
 
+static int rtl8125_get_features(struct phy_device *phydev)
+{
+	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 phydev->supported);
+
+	return genphy_read_abilities(phydev);
+}
+
+static int rtl8125_config_aneg(struct phy_device *phydev)
+{
+	int ret = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		u16 adv2500 = 0;
+
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				      phydev->advertising))
+			adv2500 = RTL_ADV_2500FULL;
+
+		ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
+					       RTL_ADV_2500FULL, adv2500);
+		if (ret < 0)
+			return ret;
+	}
+
+	return __genphy_config_aneg(phydev, ret);
+}
+
+static int rtl8125_read_status(struct phy_device *phydev)
+{
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		int lpadv = phy_read_paged(phydev, 0xa5d, 0x13);
+
+		if (lpadv < 0)
+			return lpadv;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+			phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+			phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+	}
+
+	return genphy_read_status(phydev);
+}
+
 static struct phy_driver realtek_drvs[] = {
 	{
 		PHY_ID_MATCH_EXACT(0x00008201),
@@ -333,6 +385,16 @@ static struct phy_driver realtek_drvs[] = {
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
 	}, {
+		PHY_ID_MATCH_EXACT(0x001cca50),
+		.name		= "RTL8125 2.5Gbps internal",
+		.get_features	= rtl8125_get_features,
+		.config_aneg	= rtl8125_config_aneg,
+		.read_status	= rtl8125_read_status,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_page	= rtl821x_read_page,
+		.write_page	= rtl821x_write_page,
+	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.config_init	= &rtl8366rb_config_init,