NFC: pn544: Pass hardware variant information when downloading firmware

Different pn544 hardware variant may use different commands to download
new firmwares. The C2 does a regular firmware download while the C3 uses
a more secure protocol.
As a consequence we need to pass the hardware variant from the HCI SW
version command reply down to the pn544 i2c layer, in order to use the
right protocol at run time.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 13 insertions, 1 deletions

diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index d6185ff2f87b..c7e277cddb48 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -58,6 +58,14 @@ MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
 
 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
 
+/*
+ * Exposed through the 4 most significant bytes
+ * from the HCI SW_VERSION first byte, a.k.a.
+ * SW RomLib.
+ */
+#define PN544_HW_VARIANT_C2 0xa
+#define PN544_HW_VARIANT_C3 0xb
+
 #define PN544_FW_CMD_WRITE 0x08
 #define PN544_FW_CMD_CHECK 0x06
 
@@ -119,6 +127,8 @@ struct pn544_i2c_phy {
 	unsigned int gpio_fw;
 	unsigned int en_polarity;
 
+	u8 hw_variant;
+
 	struct work_struct fw_work;
 	int fw_work_state;
 	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
@@ -469,7 +479,8 @@ static struct nfc_phy_ops i2c_phy_ops = {
 	.disable = pn544_hci_i2c_disable,
 };
 
-static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name)
+static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
+					u8 hw_variant)
 {
 	struct pn544_i2c_phy *phy = phy_id;
 
@@ -477,6 +488,7 @@ static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name)
 
 	strcpy(phy->firmware_name, firmware_name);
 
+	phy->hw_variant = hw_variant;
 	phy->fw_work_state = FW_WORK_STATE_START;
 
 	schedule_work(&phy->fw_work);