aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/nfc/s3fwrn5/phy_common.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-12-15 13:22:29 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2020-12-15 13:22:29 -0800
commitd635a69dd4981cc51f90293f5f64268620ed1565 (patch)
tree5e0a758b402ea7d624c25c3a343545dd29e80f31 /drivers/nfc/s3fwrn5/phy_common.c
parentMerge branch 'akpm' (patches from Andrew) (diff)
parentnet: hns3: fix expression that is currently always true (diff)
downloadlinux-dev-d635a69dd4981cc51f90293f5f64268620ed1565.tar.xz
linux-dev-d635a69dd4981cc51f90293f5f64268620ed1565.zip
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
Diffstat (limited to 'drivers/nfc/s3fwrn5/phy_common.c')
-rw-r--r--drivers/nfc/s3fwrn5/phy_common.c75
1 files changed, 75 insertions, 0 deletions
diff --git a/drivers/nfc/s3fwrn5/phy_common.c b/drivers/nfc/s3fwrn5/phy_common.c
new file mode 100644
index 000000000000..497b02b30ae7
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/phy_common.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electrnoics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "phy_common.h"
+
+void s3fwrn5_phy_set_wake(void *phy_id, bool wake)
+{
+ struct phy_common *phy = phy_id;
+
+ mutex_lock(&phy->mutex);
+ gpio_set_value(phy->gpio_fw_wake, wake);
+ msleep(S3FWRN5_EN_WAIT_TIME);
+ mutex_unlock(&phy->mutex);
+}
+EXPORT_SYMBOL(s3fwrn5_phy_set_wake);
+
+bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode)
+{
+ if (phy->mode == mode)
+ return false;
+
+ phy->mode = mode;
+
+ gpio_set_value(phy->gpio_en, 1);
+ gpio_set_value(phy->gpio_fw_wake, 0);
+ if (mode == S3FWRN5_MODE_FW)
+ gpio_set_value(phy->gpio_fw_wake, 1);
+
+ if (mode != S3FWRN5_MODE_COLD) {
+ msleep(S3FWRN5_EN_WAIT_TIME);
+ gpio_set_value(phy->gpio_en, 0);
+ msleep(S3FWRN5_EN_WAIT_TIME);
+ }
+
+ return true;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_power_ctrl);
+
+void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode)
+{
+ struct phy_common *phy = phy_id;
+
+ mutex_lock(&phy->mutex);
+
+ s3fwrn5_phy_power_ctrl(phy, mode);
+
+ mutex_unlock(&phy->mutex);
+}
+EXPORT_SYMBOL(s3fwrn5_phy_set_mode);
+
+enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id)
+{
+ struct phy_common *phy = phy_id;
+ enum s3fwrn5_mode mode;
+
+ mutex_lock(&phy->mutex);
+
+ mode = phy->mode;
+
+ mutex_unlock(&phy->mutex);
+
+ return mode;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_get_mode);