mtd: nand: move of_get_nand_xxx() helpers into nand_base.c

Now that all drivers go through nand_set_flash_node() to parse the generic
NAND properties, we can move all of_get_nand_xxx() helpers in to
nand_base.c, make them static and remove of_mtd.c and of_mtd.h.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

2 files changed, 0 insertions, 156 deletions

diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 156c072b3117..e31bdc123c6e 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_OF_UNITTEST) += unittest.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
 obj-$(CONFIG_OF_PCI)	+= of_pci.o
 obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
-obj-$(CONFIG_OF_MTD)	+= of_mtd.o
 obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
 obj-$(CONFIG_OF_RESOLVE)  += resolver.o
 obj-$(CONFIG_OF_OVERLAY) += overlay.o
diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
deleted file mode 100644
index 15d056e181d2..000000000000
--- a/drivers/of/of_mtd.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * OF helpers for mtd.
- *
- * This file is released under the GPLv2
- *
- */
-#include <linux/kernel.h>
-#include <linux/of_mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/export.h>
-
-/**
- * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h
- * into the device tree binding of 'nand-ecc', so that MTD
- * device driver can get nand ecc from device tree.
- */
-static const char *nand_ecc_modes[] = {
-	[NAND_ECC_NONE]		= "none",
-	[NAND_ECC_SOFT]		= "soft",
-	[NAND_ECC_HW]		= "hw",
-	[NAND_ECC_HW_SYNDROME]	= "hw_syndrome",
-	[NAND_ECC_HW_OOB_FIRST]	= "hw_oob_first",
-	[NAND_ECC_SOFT_BCH]	= "soft_bch",
-};
-
-/**
- * of_get_nand_ecc_mode - Get nand ecc mode for given device_node
- * @np:	Pointer to the given device_node
- *
- * The function gets ecc mode string from property 'nand-ecc-mode',
- * and return its index in nand_ecc_modes table, or errno in error case.
- */
-int of_get_nand_ecc_mode(struct device_node *np)
-{
-	const char *pm;
-	int err, i;
-
-	err = of_property_read_string(np, "nand-ecc-mode", &pm);
-	if (err < 0)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++)
-		if (!strcasecmp(pm, nand_ecc_modes[i]))
-			return i;
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
-
-/**
- * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node
- * @np:	Pointer to the given device_node
- *
- * The function gets ecc algorithm and returns its enum value, or errno in error
- * case.
- */
-int of_get_nand_ecc_algo(struct device_node *np)
-{
-	const char *pm;
-	int err;
-
-	/*
-	 * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo.
-	 * It's not implemented yet as currently NAND subsystem ignores
-	 * algorithm explicitly set this way. Once it's handled we should
-	 * document & support new property.
-	 */
-
-	/*
-	 * For backward compatibility we also read "nand-ecc-mode" checking
-	 * for some obsoleted values that were specifying ECC algorithm.
-	 */
-	err = of_property_read_string(np, "nand-ecc-mode", &pm);
-	if (err < 0)
-		return err;
-
-	if (!strcasecmp(pm, "soft"))
-		return NAND_ECC_HAMMING;
-	else if (!strcasecmp(pm, "soft_bch"))
-		return NAND_ECC_BCH;
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo);
-
-/**
- * of_get_nand_ecc_step_size - Get ECC step size associated to
- * the required ECC strength (see below).
- * @np:	Pointer to the given device_node
- *
- * return the ECC step size, or errno in error case.
- */
-int of_get_nand_ecc_step_size(struct device_node *np)
-{
-	int ret;
-	u32 val;
-
-	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
-	return ret ? ret : val;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
-
-/**
- * of_get_nand_ecc_strength - Get required ECC strength over the
- * correspnding step size as defined by 'nand-ecc-size'
- * @np:	Pointer to the given device_node
- *
- * return the ECC strength, or errno in error case.
- */
-int of_get_nand_ecc_strength(struct device_node *np)
-{
-	int ret;
-	u32 val;
-
-	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
-	return ret ? ret : val;
-}
-EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
-
-/**
- * of_get_nand_bus_width - Get nand bus witdh for given device_node
- * @np:	Pointer to the given device_node
- *
- * return bus width option, or errno in error case.
- */
-int of_get_nand_bus_width(struct device_node *np)
-{
-	u32 val;
-
-	if (of_property_read_u32(np, "nand-bus-width", &val))
-		return 8;
-
-	switch(val) {
-	case 8:
-	case 16:
-		return val;
-	default:
-		return -EIO;
-	}
-}
-EXPORT_SYMBOL_GPL(of_get_nand_bus_width);
-
-/**
- * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node
- * @np:	Pointer to the given device_node
- *
- * return true if present false other wise
- */
-bool of_get_nand_on_flash_bbt(struct device_node *np)
-{
-	return of_property_read_bool(np, "nand-on-flash-bbt");
-}
-EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt);