diff options
| author |   Grant Grundler <grundler@parisc-linux.org> | 2009-04-20 04:28:22 +0000 |
|---|---|---|
| committer |   Kyle McMartin <kyle@mcmartin.ca> | 2009-07-03 03:34:07 +0000 |
| commit | fed99b1e86f5ff4f1b41e37264bb869da67d3174 (patch) | |
| tree | eea44830caf663e97041dbb90a2f74cb7e28a1b3 /drivers/parisc/lba_pci.c | |
| parent | parisc: fix ldcw inline assembler (diff) | |
| download | linux-dev-fed99b1e86f5ff4f1b41e37264bb869da67d3174.tar.xz linux-dev-fed99b1e86f5ff4f1b41e37264bb869da67d3174.zip | |
parisc: advertise PCI devs after "assign_resources"
Alex Chiang asked me why PARISC was calling pci_bus_add_devices()
and pci_bus_assign_resources() in the opposite order from everyone else.
No reason and I couldn't see any data dependency.
Patch below applies cleanly to 2.6.30-rc2.
Later, I suspected the code worked only because no drivers would be
loaded/ready until much later in the system initialization sequence.
Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2.
Not tested with any Dino controllers.
Not tested with PCI-PCI Bridge (TBD).
Reported-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Diffstat (limited to 'drivers/parisc/lba_pci.c')
| -rw-r--r-- | drivers/parisc/lba_pci.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 59fbbf128365..f2661e1255af 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1509,10 +1509,6 @@ lba_driver_probe(struct parisc_device *dev) lba_bus = lba_dev->hba.hba_bus = pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL); - if (lba_bus) { - lba_next_bus = lba_bus->subordinate + 1; - pci_bus_add_devices(lba_bus); - } /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { @@ -1533,7 +1529,6 @@ lba_driver_probe(struct parisc_device *dev) } pci_enable_bridges(lba_bus); - /* ** Once PCI register ops has walked the bus, access to config ** space is restricted. Avoids master aborts on config cycles. @@ -1543,6 +1538,11 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->flags |= LBA_FLAG_SKIP_PROBE; } + if (lba_bus) { + lba_next_bus = lba_bus->subordinate + 1; + pci_bus_add_devices(lba_bus); + } + /* Whew! Finally done! Tell services we got this one covered. */ return 0; } |