PCI: imx: Initial imx7d pm support

On imx7d the pcie-phy power domain is turned off in suspend and this can
make the system hang after resume when attempting any read from PCI.

Fix this by adding minimal suspend/resume code. This will prepare for
powering down on suspend and reset the block on resume.

Code is only for imx7d but a very similar sequence can be used for
other SOCs.

Original-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: commit log update]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

1 files changed, 92 insertions, 5 deletions

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 21e03c6567da..d13dae50dc99 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -596,6 +596,24 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 	return -EINVAL;
 }
 
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
@@ -614,11 +632,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	if (imx6_pcie->variant == IMX7D)
-		reset_control_deassert(imx6_pcie->apps_reset);
-	else
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	imx6_pcie_ltssm_enable(dev);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
@@ -737,6 +751,78 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = imx6_pcie_link_up,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	default:
+		dev_err(dev, "ltssm_disable not supported\n");
+	}
+}
+
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+	clk_disable_unprepare(imx6_pcie->pcie);
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+
+	if (imx6_pcie->variant == IMX7D) {
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	}
+}
+
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_clk_disable(imx6_pcie);
+	imx6_pcie_ltssm_disable(dev);
+
+	return 0;
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_assert_core_reset(imx6_pcie);
+	imx6_pcie_init_phy(imx6_pcie);
+	imx6_pcie_deassert_core_reset(imx6_pcie);
+	dw_pcie_setup_rc(pp);
+
+	ret = imx6_pcie_establish_link(imx6_pcie);
+	if (ret < 0)
+		dev_info(dev, "pcie link is down after resume.\n");
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				      imx6_pcie_resume_noirq)
+};
+
 static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -903,6 +989,7 @@ static struct platform_driver imx6_pcie_driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
 	},
 	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,