phy: Group vendor specific phy drivers

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 1153 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
new file mode 100644
index 000000000000..78ca62897784
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+/* QMP PHY QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER				0x00c
+#define QSERDES_COM_SSC_EN_CENTER			0x010
+#define QSERDES_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_COM_SSC_PER1				0x01c
+#define QSERDES_COM_SSC_PER2				0x020
+#define QSERDES_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN			0x034
+#define QSERDES_COM_CLK_ENABLE1				0x038
+#define QSERDES_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_COM_SYSCLK_BUF_ENABLE			0x040
+#define QSERDES_COM_PLL_IVCO				0x048
+#define QSERDES_COM_LOCK_CMP1_MODE0			0x04c
+#define QSERDES_COM_LOCK_CMP2_MODE0			0x050
+#define QSERDES_COM_LOCK_CMP3_MODE0			0x054
+#define QSERDES_COM_LOCK_CMP1_MODE1			0x058
+#define QSERDES_COM_LOCK_CMP2_MODE1			0x05c
+#define QSERDES_COM_LOCK_CMP3_MODE1			0x060
+#define QSERDES_COM_BG_TRIM				0x070
+#define QSERDES_COM_CLK_EP_DIV				0x074
+#define QSERDES_COM_CP_CTRL_MODE0			0x078
+#define QSERDES_COM_CP_CTRL_MODE1			0x07c
+#define QSERDES_COM_PLL_RCTRL_MODE0			0x084
+#define QSERDES_COM_PLL_RCTRL_MODE1			0x088
+#define QSERDES_COM_PLL_CCTRL_MODE0			0x090
+#define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
+#define QSERDES_COM_RESETSM_CNTRL			0x0b4
+#define QSERDES_COM_RESTRIM_CTRL			0x0bc
+#define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
+#define QSERDES_COM_LOCK_CMP_EN				0x0c8
+#define QSERDES_COM_LOCK_CMP_CFG			0x0cc
+#define QSERDES_COM_DEC_START_MODE0			0x0d0
+#define QSERDES_COM_DEC_START_MODE1			0x0d4
+#define QSERDES_COM_DIV_FRAC_START1_MODE0		0x0dc
+#define QSERDES_COM_DIV_FRAC_START2_MODE0		0x0e0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0		0x0e4
+#define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
+#define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
+#define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1		0x114
+#define QSERDES_COM_VCO_TUNE_CTRL			0x124
+#define QSERDES_COM_VCO_TUNE_MAP			0x128
+#define QSERDES_COM_VCO_TUNE1_MODE0			0x12c
+#define QSERDES_COM_VCO_TUNE2_MODE0			0x130
+#define QSERDES_COM_VCO_TUNE1_MODE1			0x134
+#define QSERDES_COM_VCO_TUNE2_MODE1			0x138
+#define QSERDES_COM_VCO_TUNE_TIMER1			0x144
+#define QSERDES_COM_VCO_TUNE_TIMER2			0x148
+#define QSERDES_COM_BG_CTRL				0x170
+#define QSERDES_COM_CLK_SELECT				0x174
+#define QSERDES_COM_HSCLK_SEL				0x178
+#define QSERDES_COM_CORECLK_DIV				0x184
+#define QSERDES_COM_CORE_CLK_EN				0x18c
+#define QSERDES_COM_C_READY_STATUS			0x190
+#define QSERDES_COM_CMN_CONFIG				0x194
+#define QSERDES_COM_SVS_MODE_CLK_SEL			0x19c
+#define QSERDES_COM_DEBUG_BUS0				0x1a0
+#define QSERDES_COM_DEBUG_BUS1				0x1a4
+#define QSERDES_COM_DEBUG_BUS2				0x1a8
+#define QSERDES_COM_DEBUG_BUS3				0x1ac
+#define QSERDES_COM_DEBUG_BUS_SEL			0x1b0
+#define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
+
+/* QMP PHY TX registers */
+#define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
+#define QSERDES_TX_DEBUG_BUS_SEL			0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
+#define QSERDES_TX_LANE_MODE				0x094
+#define QSERDES_TX_RCV_DETECT_LVL_2			0x0ac
+
+/* QMP PHY RX registers */
+#define QSERDES_RX_UCDR_SO_GAIN_HALF			0x010
+#define QSERDES_RX_UCDR_SO_GAIN				0x01c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN		0x040
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE	0x048
+#define QSERDES_RX_RX_TERM_BW				0x090
+#define QSERDES_RX_RX_EQ_GAIN1_LSB			0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB			0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB			0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB			0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3		0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4		0x0e0
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x10c
+#define QSERDES_RX_SIGDET_ENABLES			0x110
+#define QSERDES_RX_SIGDET_CNTRL				0x114
+#define QSERDES_RX_SIGDET_LVL				0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL		0x11c
+#define QSERDES_RX_RX_BAND				0x120
+#define QSERDES_RX_RX_INTERFACE_MODE			0x12c
+
+/* QMP PHY PCS registers */
+#define QPHY_POWER_DOWN_CONTROL				0x04
+#define QPHY_TXDEEMPH_M6DB_V0				0x24
+#define QPHY_TXDEEMPH_M3P5DB_V0				0x28
+#define QPHY_ENDPOINT_REFCLK_DRIVE			0x54
+#define QPHY_RX_IDLE_DTCT_CNTRL				0x58
+#define QPHY_POWER_STATE_CONFIG1			0x60
+#define QPHY_POWER_STATE_CONFIG2			0x64
+#define QPHY_POWER_STATE_CONFIG4			0x6c
+#define QPHY_LOCK_DETECT_CONFIG1			0x80
+#define QPHY_LOCK_DETECT_CONFIG2			0x84
+#define QPHY_LOCK_DETECT_CONFIG3			0x88
+#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
+#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET				BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN				BIT(0)
+#define REFCLK_DRV_DSBL				BIT(1)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START				BIT(0)
+#define PCS_START				BIT(1)
+#define PLL_READY_GATE_EN			BIT(3)
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS				BIT(6)
+/* QPHY_COM_PCS_READY_STATUS bit */
+#define PCS_READY				BIT(0)
+
+#define PHY_INIT_COMPLETE_TIMEOUT		1000
+#define POWER_DOWN_DELAY_US_MIN			10
+#define POWER_DOWN_DELAY_US_MAX			11
+
+#define MAX_PROP_NAME				32
+
+struct qmp_phy_init_tbl {
+	unsigned int offset;
+	unsigned int val;
+	/*
+	 * register part of layout ?
+	 * if yes, then offset gives index in the reg-layout
+	 */
+	int in_layout;
+};
+
+#define QMP_PHY_INIT_CFG(o, v)		\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+	}
+
+#define QMP_PHY_INIT_CFG_L(o, v)	\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+		.in_layout = 1,		\
+	}
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+	/* Common block control registers */
+	QPHY_COM_SW_RESET,
+	QPHY_COM_POWER_DOWN_CONTROL,
+	QPHY_COM_START_CONTROL,
+	QPHY_COM_PCS_READY_STATUS,
+	/* PCS registers */
+	QPHY_PLL_LOCK_CHK_DLY_TIME,
+	QPHY_FLL_CNTRL1,
+	QPHY_FLL_CNTRL2,
+	QPHY_FLL_CNT_VAL_L,
+	QPHY_FLL_CNT_VAL_H_TOL,
+	QPHY_FLL_MAN_CODE,
+	QPHY_SW_RESET,
+	QPHY_START_CTRL,
+	QPHY_PCS_READY_STATUS,
+};
+
+static const unsigned int pciephy_regs_layout[] = {
+	[QPHY_COM_SW_RESET]		= 0x400,
+	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
+	[QPHY_COM_START_CONTROL]	= 0x408,
+	[QPHY_COM_PCS_READY_STATUS]	= 0x448,
+	[QPHY_PLL_LOCK_CHK_DLY_TIME]	= 0xa8,
+	[QPHY_FLL_CNTRL1]		= 0xc4,
+	[QPHY_FLL_CNTRL2]		= 0xc8,
+	[QPHY_FLL_CNT_VAL_L]		= 0xcc,
+	[QPHY_FLL_CNT_VAL_H_TOL]	= 0xd0,
+	[QPHY_FLL_MAN_CODE]		= 0xd4,
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_READY_STATUS]		= 0x174,
+};
+
+static const unsigned int usb3phy_regs_layout[] = {
+	[QPHY_FLL_CNTRL1]		= 0xc0,
+	[QPHY_FLL_CNTRL2]		= 0xc4,
+	[QPHY_FLL_CNT_VAL_L]		= 0xc8,
+	[QPHY_FLL_CNT_VAL_H_TOL]	= 0xcc,
+	[QPHY_FLL_MAN_CODE]		= 0xd0,
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_READY_STATUS]		= 0x17c,
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESCODE_DIV_NUM, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_BAND, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x19),
+};
+
+static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_RX_IDLE_DTCT_CNTRL, 0x4c),
+	QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+
+	QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x05),
+
+	QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG4, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG1, 0xa3),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x04),
+	/* PLL and Loop filter settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	/* SSC settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xbb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+};
+
+static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
+	/* FLL settings */
+	QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL2, 0x03),
+	QMP_PHY_INIT_CFG_L(QPHY_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG_L(QPHY_FLL_CNT_VAL_H_TOL, 0x42),
+	QMP_PHY_INIT_CFG_L(QPHY_FLL_MAN_CODE, 0x85),
+
+	/* Lock Det settings */
+	QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+/* struct qmp_phy_cfg - per-PHY initialization config */
+struct qmp_phy_cfg {
+	/* phy-type - PCIE/UFS/USB */
+	unsigned int type;
+	/* number of lanes provided by phy */
+	int nlanes;
+
+	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+	const struct qmp_phy_init_tbl *serdes_tbl;
+	int serdes_tbl_num;
+	const struct qmp_phy_init_tbl *tx_tbl;
+	int tx_tbl_num;
+	const struct qmp_phy_init_tbl *rx_tbl;
+	int rx_tbl_num;
+	const struct qmp_phy_init_tbl *pcs_tbl;
+	int pcs_tbl_num;
+
+	/* clock ids to be requested */
+	const char * const *clk_list;
+	int num_clks;
+	/* resets to be requested */
+	const char * const *reset_list;
+	int num_resets;
+	/* regulators to be requested */
+	const char * const *vreg_list;
+	int num_vregs;
+
+	/* array of registers with different offsets */
+	const unsigned int *regs;
+
+	unsigned int start_ctrl;
+	unsigned int pwrdn_ctrl;
+	unsigned int mask_pcs_ready;
+	unsigned int mask_com_pcs_ready;
+
+	/* true, if PHY has a separate PHY_COM control block */
+	bool has_phy_com_ctrl;
+	/* true, if PHY has a reset for individual lanes */
+	bool has_lane_rst;
+	/* true, if PHY needs delay after POWER_DOWN */
+	bool has_pwrdn_delay;
+	/* power_down delay in usec */
+	int pwrdn_delay_min;
+	int pwrdn_delay_max;
+};
+
+/**
+ * struct qmp_phy - per-lane phy descriptor
+ *
+ * @phy: generic phy
+ * @tx: iomapped memory space for lane's tx
+ * @rx: iomapped memory space for lane's rx
+ * @pcs: iomapped memory space for lane's pcs
+ * @pipe_clk: pipe lock
+ * @index: lane index
+ * @qmp: QMP phy to which this lane belongs
+ * @lane_rst: lane's reset controller
+ */
+struct qmp_phy {
+	struct phy *phy;
+	void __iomem *tx;
+	void __iomem *rx;
+	void __iomem *pcs;
+	struct clk *pipe_clk;
+	unsigned int index;
+	struct qcom_qmp *qmp;
+	struct reset_control *lane_rst;
+};
+
+/**
+ * struct qcom_qmp - structure holding QMP phy block attributes
+ *
+ * @dev: device
+ * @serdes: iomapped memory space for phy's serdes
+ *
+ * @clks: array of clocks required by phy
+ * @resets: array of resets required by phy
+ * @vregs: regulator supplies bulk data
+ *
+ * @cfg: phy specific configuration
+ * @phys: array of per-lane phy descriptors
+ * @phy_mutex: mutex lock for PHY common block initialization
+ * @init_count: phy common block initialization count
+ */
+struct qcom_qmp {
+	struct device *dev;
+	void __iomem *serdes;
+
+	struct clk **clks;
+	struct reset_control **resets;
+	struct regulator_bulk_data *vregs;
+
+	const struct qmp_phy_cfg *cfg;
+	struct qmp_phy **phys;
+
+	struct mutex phy_mutex;
+	int init_count;
+};
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg |= val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg &= ~val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const msm8996_phy_clk_l[] = {
+	"aux", "cfg_ahb", "ref",
+};
+
+/* list of resets */
+static const char * const msm8996_pciephy_reset_l[] = {
+	"phy", "common", "cfg",
+};
+
+static const char * const msm8996_usb3phy_reset_l[] = {
+	"phy", "common",
+};
+
+/* list of regulators */
+static const char * const msm8996_phy_vreg_l[] = {
+	"vdda-phy", "vdda-pll",
+};
+
+static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 3,
+
+	.serdes_tbl		= msm8996_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_pcie_serdes_tbl),
+	.tx_tbl			= msm8996_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_pcie_tx_tbl),
+	.rx_tbl			= msm8996_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(msm8996_pcie_rx_tbl),
+	.pcs_tbl		= msm8996_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(msm8996_pcie_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= msm8996_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_pciephy_reset_l),
+	.vreg_list		= msm8996_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.regs			= pciephy_regs_layout,
+
+	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_com_pcs_ready	= PCS_READY,
+
+	.has_phy_com_ctrl	= true,
+	.has_lane_rst		= true,
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= msm8996_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8996_usb3_serdes_tbl),
+	.tx_tbl			= msm8996_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8996_usb3_tx_tbl),
+	.rx_tbl			= msm8996_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(msm8996_usb3_rx_tbl),
+	.pcs_tbl		= msm8996_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(msm8996_usb3_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= msm8996_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.regs			= usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.mask_pcs_ready		= PHYSTATUS,
+};
+
+static void qcom_qmp_phy_configure(void __iomem *base,
+				   const unsigned int *regs,
+				   const struct qmp_phy_init_tbl tbl[],
+				   int num)
+{
+	int i;
+	const struct qmp_phy_init_tbl *t = tbl;
+
+	if (!t)
+		return;
+
+	for (i = 0; i < num; i++, t++) {
+		if (t->in_layout)
+			writel(t->val, base + regs[t->offset]);
+		else
+			writel(t->val, base + t->offset);
+	}
+}
+
+static int qcom_qmp_phy_poweron(struct phy *phy)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+	struct qcom_qmp *qmp = qphy->qmp;
+	int num = qmp->cfg->num_vregs;
+	int ret;
+
+	dev_vdbg(&phy->dev, "Powering on QMP phy\n");
+
+	/* turn on regulator supplies */
+	ret = regulator_bulk_enable(num, qmp->vregs);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(qphy->pipe_clk);
+	if (ret) {
+		dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret);
+		regulator_bulk_disable(num, qmp->vregs);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int qcom_qmp_phy_poweroff(struct phy *phy)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+	struct qcom_qmp *qmp = qphy->qmp;
+
+	clk_disable_unprepare(qphy->pipe_clk);
+
+	regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs);
+
+	return 0;
+}
+
+static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
+{
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *serdes = qmp->serdes;
+	int ret, i;
+
+	mutex_lock(&qmp->phy_mutex);
+	if (qmp->init_count++) {
+		mutex_unlock(&qmp->phy_mutex);
+		return 0;
+	}
+
+	for (i = 0; i < cfg->num_resets; i++) {
+		ret = reset_control_deassert(qmp->resets[i]);
+		if (ret) {
+			dev_err(qmp->dev, "%s reset deassert failed\n",
+				qmp->cfg->reset_list[i]);
+			while (--i >= 0)
+				reset_control_assert(qmp->resets[i]);
+			goto err_rst;
+		}
+	}
+
+	if (cfg->has_phy_com_ctrl)
+		qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+			     SW_PWRDN);
+
+	/* Serdes configuration */
+	qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl,
+			       cfg->serdes_tbl_num);
+
+	if (cfg->has_phy_com_ctrl) {
+		void __iomem *status;
+		unsigned int mask, val;
+
+		qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+		qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+			     SERDES_START | PCS_START);
+
+		status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+		mask = cfg->mask_com_pcs_ready;
+
+		ret = readl_poll_timeout(status, val, (val & mask), 10,
+					 PHY_INIT_COMPLETE_TIMEOUT);
+		if (ret) {
+			dev_err(qmp->dev,
+				"phy common block init timed-out\n");
+			goto err_com_init;
+		}
+	}
+
+	mutex_unlock(&qmp->phy_mutex);
+
+	return 0;
+
+err_com_init:
+	while (--i >= 0)
+		reset_control_assert(qmp->resets[i]);
+err_rst:
+	mutex_unlock(&qmp->phy_mutex);
+	return ret;
+}
+
+static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
+{
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *serdes = qmp->serdes;
+	int i = cfg->num_resets;
+
+	mutex_lock(&qmp->phy_mutex);
+	if (--qmp->init_count) {
+		mutex_unlock(&qmp->phy_mutex);
+		return 0;
+	}
+
+	if (cfg->has_phy_com_ctrl) {
+		qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+			     SERDES_START | PCS_START);
+		qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET],
+			     SW_RESET);
+		qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
+			     SW_PWRDN);
+	}
+
+	while (--i >= 0)
+		reset_control_assert(qmp->resets[i]);
+
+	mutex_unlock(&qmp->phy_mutex);
+
+	return 0;
+}
+
+/* PHY Initialization */
+static int qcom_qmp_phy_init(struct phy *phy)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+	struct qcom_qmp *qmp = qphy->qmp;
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *tx = qphy->tx;
+	void __iomem *rx = qphy->rx;
+	void __iomem *pcs = qphy->pcs;
+	void __iomem *status;
+	unsigned int mask, val;
+	int ret, i;
+
+	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
+
+	for (i = 0; i < qmp->cfg->num_clks; i++) {
+		ret = clk_prepare_enable(qmp->clks[i]);
+		if (ret) {
+			dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
+				qmp->cfg->clk_list[i], ret);
+			while (--i >= 0)
+				clk_disable_unprepare(qmp->clks[i]);
+		}
+	}
+
+	ret = qcom_qmp_phy_com_init(qmp);
+	if (ret)
+		goto err_com_init;
+
+	if (cfg->has_lane_rst) {
+		ret = reset_control_deassert(qphy->lane_rst);
+		if (ret) {
+			dev_err(qmp->dev, "lane%d reset deassert failed\n",
+				qphy->index);
+			goto err_lane_rst;
+		}
+	}
+
+	/* Tx, Rx, and PCS configurations */
+	qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num);
+	qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num);
+	qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+
+	/*
+	 * Pull out PHY from POWER DOWN state.
+	 * This is active low enable signal to power-down PHY.
+	 */
+	qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+	if (cfg->has_pwrdn_delay)
+		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
+
+	/* start SerDes and Phy-Coding-Sublayer */
+	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+	/* Pull PHY out of reset state */
+	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+	mask = cfg->mask_pcs_ready;
+
+	ret = readl_poll_timeout(status, val, !(val & mask), 1,
+				 PHY_INIT_COMPLETE_TIMEOUT);
+	if (ret) {
+		dev_err(qmp->dev, "phy initialization timed-out\n");
+		goto err_pcs_ready;
+	}
+
+	return ret;
+
+err_pcs_ready:
+	if (cfg->has_lane_rst)
+		reset_control_assert(qphy->lane_rst);
+err_lane_rst:
+	qcom_qmp_phy_com_exit(qmp);
+err_com_init:
+	while (--i >= 0)
+		clk_disable_unprepare(qmp->clks[i]);
+
+	return ret;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+	struct qmp_phy *qphy = phy_get_drvdata(phy);
+	struct qcom_qmp *qmp = qphy->qmp;
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	int i = cfg->num_clks;
+
+	/* PHY reset */
+	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+	/* stop SerDes and Phy-Coding-Sublayer */
+	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+	/* Put PHY into POWER DOWN state: active low */
+	qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl);
+
+	if (cfg->has_lane_rst)
+		reset_control_assert(qphy->lane_rst);
+
+	qcom_qmp_phy_com_exit(qmp);
+
+	while (--i >= 0)
+		clk_disable_unprepare(qmp->clks[i]);
+
+	return 0;
+}
+
+static int qcom_qmp_phy_vreg_init(struct device *dev)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	int num = qmp->cfg->num_vregs;
+	int i;
+
+	qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
+	if (!qmp->vregs)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++)
+		qmp->vregs[i].supply = qmp->cfg->vreg_list[i];
+
+	return devm_regulator_bulk_get(dev, num, qmp->vregs);
+}
+
+static int qcom_qmp_phy_reset_init(struct device *dev)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	int i;
+
+	qmp->resets = devm_kcalloc(dev, qmp->cfg->num_resets,
+				   sizeof(*qmp->resets), GFP_KERNEL);
+	if (!qmp->resets)
+		return -ENOMEM;
+
+	for (i = 0; i < qmp->cfg->num_resets; i++) {
+		struct reset_control *rst;
+		const char *name = qmp->cfg->reset_list[i];
+
+		rst = devm_reset_control_get(dev, name);
+		if (IS_ERR(rst)) {
+			dev_err(dev, "failed to get %s reset\n", name);
+			return PTR_ERR(rst);
+		}
+		qmp->resets[i] = rst;
+	}
+
+	return 0;
+}
+
+static int qcom_qmp_phy_clk_init(struct device *dev)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	int ret, i;
+
+	qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks,
+				 sizeof(*qmp->clks), GFP_KERNEL);
+	if (!qmp->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < qmp->cfg->num_clks; i++) {
+		struct clk *_clk;
+		const char *name = qmp->cfg->clk_list[i];
+
+		_clk = devm_clk_get(dev, name);
+		if (IS_ERR(_clk)) {
+			ret = PTR_ERR(_clk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to get %s clk, %d\n",
+					name, ret);
+			return ret;
+		}
+		qmp->clks[i] = _clk;
+	}
+
+	return 0;
+}
+
+/*
+ * Register a fixed rate pipe clock.
+ *
+ * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_pipe_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_pipe_clksrc here. The gcc driver takes care
+ * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
+ * Below picture shows this relationship.
+ *
+ *         +---------------+
+ *         |   PHY block   |<<---------------------------------------+
+ *         |               |                                         |
+ *         |   +-------+   |                   +-----+               |
+ *   I/P---^-->|  PLL  |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
+ *    clk  |   +-------+   |                   +-----+
+ *         +---------------+
+ */
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
+{
+	char name[24];
+	struct clk_fixed_rate *fixed;
+	struct clk_init_data init = { };
+
+	switch (qmp->cfg->type) {
+	case PHY_TYPE_USB3:
+		snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
+		break;
+	case PHY_TYPE_PCIE:
+		snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
+		break;
+	default:
+		/* not all phys register pipe clocks, so return success */
+		return 0;
+	}
+
+	fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
+	if (!fixed)
+		return -ENOMEM;
+
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+
+	/* controllers using QMP phys use 125MHz pipe clock interface */
+	fixed->fixed_rate = 125000000;
+	fixed->hw.init = &init;
+
+	return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
+
+static const struct phy_ops qcom_qmp_phy_gen_ops = {
+	.init		= qcom_qmp_phy_init,
+	.exit		= qcom_qmp_phy_exit,
+	.power_on	= qcom_qmp_phy_poweron,
+	.power_off	= qcom_qmp_phy_poweroff,
+	.owner		= THIS_MODULE,
+};
+
+static
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
+{
+	struct qcom_qmp *qmp = dev_get_drvdata(dev);
+	struct phy *generic_phy;
+	struct qmp_phy *qphy;
+	char prop_name[MAX_PROP_NAME];
+	int ret;
+
+	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+	if (!qphy)
+		return -ENOMEM;
+
+	/*
+	 * Get memory resources for each phy lane:
+	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+	 */
+	qphy->tx = of_iomap(np, 0);
+	if (!qphy->tx)
+		return -ENOMEM;
+
+	qphy->rx = of_iomap(np, 1);
+	if (!qphy->rx)
+		return -ENOMEM;
+
+	qphy->pcs = of_iomap(np, 2);
+	if (!qphy->pcs)
+		return -ENOMEM;
+
+	/*
+	 * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3
+	 * based phys, so they essentially have pipe clock. So,
+	 * we return error in case phy is USB3 or PIPE type.
+	 * Otherwise, we initialize pipe clock to NULL for
+	 * all phys that don't need this.
+	 */
+	snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
+	qphy->pipe_clk = of_clk_get_by_name(np, prop_name);
+	if (IS_ERR(qphy->pipe_clk)) {
+		if (qmp->cfg->type == PHY_TYPE_PCIE ||
+		    qmp->cfg->type == PHY_TYPE_USB3) {
+			ret = PTR_ERR(qphy->pipe_clk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev,
+					"failed to get lane%d pipe_clk, %d\n",
+					id, ret);
+			return ret;
+		}
+		qphy->pipe_clk = NULL;
+	}
+
+	/* Get lane reset, if any */
+	if (qmp->cfg->has_lane_rst) {
+		snprintf(prop_name, sizeof(prop_name), "lane%d", id);
+		qphy->lane_rst = of_reset_control_get(np, prop_name);
+		if (IS_ERR(qphy->lane_rst)) {
+			dev_err(dev, "failed to get lane%d reset\n", id);
+			return PTR_ERR(qphy->lane_rst);
+		}
+	}
+
+	generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops);
+	if (IS_ERR(generic_phy)) {
+		ret = PTR_ERR(generic_phy);
+		dev_err(dev, "failed to create qphy %d\n", ret);
+		return ret;
+	}
+
+	qphy->phy = generic_phy;
+	qphy->index = id;
+	qphy->qmp = qmp;
+	qmp->phys[id] = qphy;
+	phy_set_drvdata(generic_phy, qphy);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
+	{
+		.compatible = "qcom,msm8996-qmp-pcie-phy",
+		.data = &msm8996_pciephy_cfg,
+	}, {
+		.compatible = "qcom,msm8996-qmp-usb3-phy",
+		.data = &msm8996_usb3phy_cfg,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+
+static int qcom_qmp_phy_probe(struct platform_device *pdev)
+{
+	struct qcom_qmp *qmp;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct device_node *child;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+	int num, id;
+	int ret;
+
+	qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
+	if (!qmp)
+		return -ENOMEM;
+
+	qmp->dev = dev;
+	dev_set_drvdata(dev, qmp);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* per PHY serdes; usually located at base address */
+	qmp->serdes = base;
+
+	mutex_init(&qmp->phy_mutex);
+
+	/* Get the specific init parameters of QMP phy */
+	qmp->cfg = of_device_get_match_data(dev);
+
+	ret = qcom_qmp_phy_clk_init(dev);
+	if (ret)
+		return ret;
+
+	ret = qcom_qmp_phy_reset_init(dev);
+	if (ret)
+		return ret;
+
+	ret = qcom_qmp_phy_vreg_init(dev);
+	if (ret) {
+		dev_err(dev, "failed to get regulator supplies\n");
+		return ret;
+	}
+
+	num = of_get_available_child_count(dev->of_node);
+	/* do we have a rogue child node ? */
+	if (num > qmp->cfg->nlanes)
+		return -EINVAL;
+
+	qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
+	if (!qmp->phys)
+		return -ENOMEM;
+
+	id = 0;
+	for_each_available_child_of_node(dev->of_node, child) {
+		/* Create per-lane phy */
+		ret = qcom_qmp_phy_create(dev, child, id);
+		if (ret) {
+			dev_err(dev, "failed to create lane%d phy, %d\n",
+				id, ret);
+			return ret;
+		}
+
+		/*
+		 * Register the pipe clock provided by phy.
+		 * See function description to see details of this pipe clock.
+		 */
+		ret = phy_pipe_clk_register(qmp, id);
+		if (ret) {
+			dev_err(qmp->dev,
+				"failed to register pipe clock source\n");
+			return ret;
+		}
+		id++;
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (!IS_ERR(phy_provider))
+		dev_info(dev, "Registered Qcom-QMP phy\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver qcom_qmp_phy_driver = {
+	.probe		= qcom_qmp_phy_probe,
+	.driver = {
+		.name	= "qcom-qmp-phy",
+		.of_match_table = qcom_qmp_phy_of_match_table,
+	},
+};
+
+module_platform_driver(qcom_qmp_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QMP PHY driver");
+MODULE_LICENSE("GPL v2");