phy: qcom-qmp: pcs-v3: add missing registers

Add missing registers, verified against:
- msm-4.19's qcom,usb3-11nm-qmp-combo.h

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220705094320.1313312-26-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
index ac13f2989a73..10dbbb006201 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v3.h
@@ -7,7 +7,9 @@
 #define QCOM_PHY_QMP_PCS_V3_H_
 
 /* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_SW_RESET				0x000
 #define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_START_CONTROL			0x008
 #define QPHY_V3_PCS_TXMGN_V0				0x00c
 #define QPHY_V3_PCS_TXMGN_V1				0x010
 #define QPHY_V3_PCS_TXMGN_V2				0x014
@@ -31,6 +33,7 @@
 #define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
 #define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
 #define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG3			0x068
 #define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
 #define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
@@ -40,24 +43,103 @@
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
 #define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
 #define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_SIGDET_LOW_2_IDLE_TIME		0x090
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_L		0x094
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_H		0x098
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_SYSCLK		0x09c
 #define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
 #define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
+#define QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL		0x0ac
 #define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_LFPS_TX_END_CNT_P2U3_START		0x0b4
 #define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
 #define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_TXONESZEROS_RUN_LENGTH		0x0c0
 #define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
 #define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
 #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
 #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
 #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL		0x0d8
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0dc
+#define QPHY_V3_PCS_ARCVR_DTCT_EN_PERIOD		0x0e0
+#define QPHY_V3_PCS_ARCVR_DTCT_CM_DLY			0x0e4
+#define QPHY_V3_PCS_ALFPS_DEGLITCH_VAL			0x0e8
+#define QPHY_V3_PCS_INSIG_SW_CTRL1			0x0ec
+#define QPHY_V3_PCS_INSIG_SW_CTRL2			0x0f0
+#define QPHY_V3_PCS_INSIG_SW_CTRL3			0x0f4
+#define QPHY_V3_PCS_INSIG_MX_CTRL1			0x0f8
+#define QPHY_V3_PCS_INSIG_MX_CTRL2			0x0fc
+#define QPHY_V3_PCS_INSIG_MX_CTRL3			0x100
+#define QPHY_V3_PCS_OUTSIG_SW_CTRL1			0x104
+#define QPHY_V3_PCS_OUTSIG_MX_CTRL1			0x108
+#define QPHY_V3_PCS_CLK_DEBUG_BYPASS_CTRL		0x10c
+#define QPHY_V3_PCS_TEST_CONTROL			0x110
+#define QPHY_V3_PCS_TEST_CONTROL2			0x114
+#define QPHY_V3_PCS_TEST_CONTROL3			0x118
+#define QPHY_V3_PCS_TEST_CONTROL4			0x11c
+#define QPHY_V3_PCS_TEST_CONTROL5			0x120
+#define QPHY_V3_PCS_TEST_CONTROL6			0x124
+#define QPHY_V3_PCS_TEST_CONTROL7			0x128
+#define QPHY_V3_PCS_COM_RESET_CONTROL			0x12c
+#define QPHY_V3_PCS_BIST_CTRL				0x130
+#define QPHY_V3_PCS_PRBS_POLY0				0x134
+#define QPHY_V3_PCS_PRBS_POLY1				0x138
+#define QPHY_V3_PCS_PRBS_SEED0				0x13c
+#define QPHY_V3_PCS_PRBS_SEED1				0x140
+#define QPHY_V3_PCS_FIXED_PAT_CTRL			0x144
+#define QPHY_V3_PCS_FIXED_PAT0				0x148
+#define QPHY_V3_PCS_FIXED_PAT1				0x14c
+#define QPHY_V3_PCS_FIXED_PAT2				0x150
+#define QPHY_V3_PCS_FIXED_PAT3				0x154
+#define QPHY_V3_PCS_COM_CLK_SWITCH_CTRL			0x158
+#define QPHY_V3_PCS_ELECIDLE_DLY_SEL			0x15c
+#define QPHY_V3_PCS_SPARE1				0x160
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_L_STATUS		0x164
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_H_STATUS		0x168
+#define QPHY_V3_PCS_BIST_CHK_STATUS			0x16c
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x170
+#define QPHY_V3_PCS_PCS_STATUS				0x174
+#define QPHY_V3_PCS_PCS_STATUS2				0x178
+#define QPHY_V3_PCS_PCS_STATUS3				0x17c
+#define QPHY_V3_PCS_COM_RESET_STATUS			0x180
+#define QPHY_V3_PCS_OSC_DTCT_STATUS			0x184
+#define QPHY_V3_PCS_REVISION_ID0			0x188
+#define QPHY_V3_PCS_REVISION_ID1			0x18c
+#define QPHY_V3_PCS_REVISION_ID2			0x190
+#define QPHY_V3_PCS_REVISION_ID3			0x194
+#define QPHY_V3_PCS_DEBUG_BUS_0_STATUS			0x198
+#define QPHY_V3_PCS_DEBUG_BUS_1_STATUS			0x19c
+#define QPHY_V3_PCS_DEBUG_BUS_2_STATUS			0x1a0
+#define QPHY_V3_PCS_DEBUG_BUS_3_STATUS			0x1a4
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1a8
 #define QPHY_V3_PCS_OSC_DTCT_ACTIONS			0x1ac
 #define QPHY_V3_PCS_SIGDET_CNTRL			0x1b0
+#define QPHY_V3_PCS_IDAC_CAL_CNTRL			0x1b4
+#define QPHY_V3_PCS_CMN_ACK_OUT_SEL			0x1b8
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME_SYSCLK	0x1bc
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_STATUS		0x1c0
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL		0x1c4
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_SYSCLK	0x1c8
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_AUXCLK	0x1cc
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_L		0x1d0
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_H		0x1d4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
 #define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL2		0x1e4
+#define QPHY_V3_PCS_RXTERMINATION_DLY_SEL		0x1e8
+#define QPHY_V3_PCS_LFPS_PER_TIMER_VAL			0x1ec
+#define QPHY_V3_PCS_SIGDET_STARTUP_TIMER_VAL		0x1f0
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG4			0x1f4
+#define QPHY_V3_PCS_RX_SIGDET_DTCT_CNTRL		0x1f8
+#define QPHY_V3_PCS_PCS_STATUS4				0x1fc
+#define QPHY_V3_PCS_PCS_STATUS4_CLEAR			0x200
+#define QPHY_V3_PCS_DEC_ERROR_COUNT_STATUS		0x204
+#define QPHY_V3_PCS_COMMA_POS_STATUS			0x208
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG3			0x214
 
 #endif