aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-ocelot.c
diff options
context:
space:
mode:
authorQuentin Schulz <quentin.schulz@bootlin.com>2018-07-25 14:26:21 +0200
committerLinus Walleij <linus.walleij@linaro.org>2018-08-06 13:00:17 +0200
commitbe36abb71d878f3320412a84e6bbec8dd796010c (patch)
tree21b80e5e6c09b818ab62d47473a8ac1f116078fe /drivers/pinctrl/pinctrl-ocelot.c
parentpinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() (diff)
downloadlinux-dev-be36abb71d878f3320412a84e6bbec8dd796010c.tar.xz
linux-dev-be36abb71d878f3320412a84e6bbec8dd796010c.zip
pinctrl: ocelot: add support for interrupt controller
This GPIO controller can serve as an interrupt controller as well on the GPIOs it handles. An interrupt is generated whenever a GPIO line changes and the interrupt for this GPIO line is enabled. This means that both the changes from low to high and high to low generate an interrupt. For some use cases, it makes sense to ignore the high to low change and not generate an interrupt. Such a use case is a line that is hold in a level high/low manner until the event holding the line gets acked. This can be achieved by making sure the interrupt on the GPIO controller side gets acked and masked only after the line gets hold in its default state, this is what's done with the fasteoi functions. Only IRQ_TYPE_EDGE_BOTH and IRQ_TYPE_LEVEL_HIGH are supported for now. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-ocelot.c')
-rw-r--r--drivers/pinctrl/pinctrl-ocelot.c102
1 files changed, 100 insertions, 2 deletions
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index e93669f4d1c8..f9fc2b3a8731 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
@@ -427,11 +428,98 @@ static const struct gpio_chip ocelot_gpiolib_chip = {
.owner = THIS_MODULE,
};
+static void ocelot_irq_mask(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+
+ regmap_update_bits(info->map, OCELOT_GPIO_INTR_ENA, BIT(gpio), 0);
+}
+
+static void ocelot_irq_unmask(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+
+ regmap_update_bits(info->map, OCELOT_GPIO_INTR_ENA, BIT(gpio),
+ BIT(gpio));
+}
+
+static void ocelot_irq_ack(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+
+ regmap_write_bits(info->map, OCELOT_GPIO_INTR, BIT(gpio), BIT(gpio));
+}
+
+static int ocelot_irq_set_type(struct irq_data *data, unsigned int type);
+
+static struct irq_chip ocelot_eoi_irqchip = {
+ .name = "gpio",
+ .irq_mask = ocelot_irq_mask,
+ .irq_eoi = ocelot_irq_ack,
+ .irq_unmask = ocelot_irq_unmask,
+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+ .irq_set_type = ocelot_irq_set_type,
+};
+
+static struct irq_chip ocelot_irqchip = {
+ .name = "gpio",
+ .irq_mask = ocelot_irq_mask,
+ .irq_ack = ocelot_irq_ack,
+ .irq_unmask = ocelot_irq_unmask,
+ .irq_set_type = ocelot_irq_set_type,
+};
+
+static int ocelot_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ type &= IRQ_TYPE_SENSE_MASK;
+
+ if (!(type & (IRQ_TYPE_EDGE_BOTH | IRQ_TYPE_LEVEL_HIGH)))
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_LEVEL_HIGH)
+ irq_set_chip_handler_name_locked(data, &ocelot_eoi_irqchip,
+ handle_fasteoi_irq, NULL);
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ irq_set_chip_handler_name_locked(data, &ocelot_irqchip,
+ handle_edge_irq, NULL);
+
+ return 0;
+}
+
+static void ocelot_irq_handler(struct irq_desc *desc)
+{
+ struct irq_chip *parent_chip = irq_desc_get_chip(desc);
+ struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+ struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+ unsigned int reg = 0, irq;
+ unsigned long irqs;
+
+ regmap_read(info->map, OCELOT_GPIO_INTR_IDENT, &reg);
+ if (!reg)
+ return;
+
+ chained_irq_enter(parent_chip, desc);
+
+ irqs = reg;
+
+ for_each_set_bit(irq, &irqs, OCELOT_PINS) {
+ generic_handle_irq(irq_linear_revmap(chip->irq.domain, irq));
+ }
+
+ chained_irq_exit(parent_chip, desc);
+}
+
static int ocelot_gpiochip_register(struct platform_device *pdev,
struct ocelot_pinctrl *info)
{
struct gpio_chip *gc;
- int ret;
+ int ret, irq;
info->gpio_chip = ocelot_gpiolib_chip;
@@ -446,7 +534,17 @@ static int ocelot_gpiochip_register(struct platform_device *pdev,
if (ret)
return ret;
- /* TODO: this can be used as an irqchip but no board is using that */
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (irq <= 0)
+ return irq;
+
+ ret = gpiochip_irqchip_add(gc, &ocelot_irqchip, 0, handle_edge_irq,
+ IRQ_TYPE_NONE);
+ if (ret)
+ return ret;
+
+ gpiochip_set_chained_irqchip(gc, &ocelot_irqchip, irq,
+ ocelot_irq_handler);
return 0;
}