Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

7 files changed, 86 insertions, 106 deletions

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e3a2518503ed..bd21655c37a6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -508,15 +508,6 @@ config  PWM_TIEHRPWM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-tiehrpwm.
 
-config  PWM_TIPWMSS
-	bool
-	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
-	help
-	  PWM Subsystem driver support for AM33xx SOC.
-
-	  PWM submodules require PWM config space access from submodule
-	  drivers and require common parent driver support.
-
 config PWM_TWL
 	tristate "TWL4030/6030 PWM support"
 	depends on TWL4030_CORE
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 26326adf71d7..9a475073dafc 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
 obj-$(CONFIG_PWM_TIEHRPWM)	+= pwm-tiehrpwm.o
-obj-$(CONFIG_PWM_TIPWMSS)	+= pwm-tipwmss.o
 obj-$(CONFIG_PWM_TWL)		+= pwm-twl.o
 obj-$(CONFIG_PWM_TWL_LED)	+= pwm-twl-led.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 6ad51aa60c03..f877e77d9184 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -472,14 +472,7 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
 		if (err)
 			return err;
 
-		/*
-		 * .apply might have to round some values in *state, if possible
-		 * read the actually implemented value back.
-		 */
-		if (chip->ops->get_state)
-			chip->ops->get_state(chip, pwm, &pwm->state);
-		else
-			pwm->state = *state;
+		pwm->state = *state;
 	} else {
 		/*
 		 * FIXME: restore the initial state in case of error.
diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
index 56c38cfae92c..1f829edd8ee7 100644
--- a/drivers/pwm/pwm-bcm-iproc.c
+++ b/drivers/pwm/pwm-bcm-iproc.c
@@ -187,6 +187,7 @@ static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 static const struct pwm_ops iproc_pwm_ops = {
 	.apply = iproc_pwmc_apply,
 	.get_state = iproc_pwmc_get_state,
+	.owner = THIS_MODULE,
 };
 
 static int iproc_pwmc_probe(struct platform_device *pdev)
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
index 359b08596d9e..7ff48c14fae8 100644
--- a/drivers/pwm/pwm-stm32.c
+++ b/drivers/pwm/pwm-stm32.c
@@ -12,6 +12,7 @@
 #include <linux/mfd/stm32-timers.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
@@ -19,6 +20,12 @@
 #define CCMR_CHANNEL_MASK  0xFF
 #define MAX_BREAKINPUT 2
 
+struct stm32_breakinput {
+	u32 index;
+	u32 level;
+	u32 filter;
+};
+
 struct stm32_pwm {
 	struct pwm_chip chip;
 	struct mutex lock; /* protect pwm config/enable */
@@ -26,15 +33,11 @@ struct stm32_pwm {
 	struct regmap *regmap;
 	u32 max_arr;
 	bool have_complementary_output;
+	struct stm32_breakinput breakinputs[MAX_BREAKINPUT];
+	unsigned int num_breakinputs;
 	u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
 };
 
-struct stm32_breakinput {
-	u32 index;
-	u32 level;
-	u32 filter;
-};
-
 static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
 {
 	return container_of(chip, struct stm32_pwm, chip);
@@ -488,22 +491,19 @@ static const struct pwm_ops stm32pwm_ops = {
 };
 
 static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
-				    int index, int level, int filter)
+				    const struct stm32_breakinput *bi)
 {
-	u32 bke = (index == 0) ? TIM_BDTR_BKE : TIM_BDTR_BK2E;
-	int shift = (index == 0) ? TIM_BDTR_BKF_SHIFT : TIM_BDTR_BK2F_SHIFT;
-	u32 mask = (index == 0) ? TIM_BDTR_BKE | TIM_BDTR_BKP | TIM_BDTR_BKF
-				: TIM_BDTR_BK2E | TIM_BDTR_BK2P | TIM_BDTR_BK2F;
-	u32 bdtr = bke;
+	u32 shift = TIM_BDTR_BKF_SHIFT(bi->index);
+	u32 bke = TIM_BDTR_BKE(bi->index);
+	u32 bkp = TIM_BDTR_BKP(bi->index);
+	u32 bkf = TIM_BDTR_BKF(bi->index);
+	u32 mask = bkf | bkp | bke;
+	u32 bdtr;
 
-	/*
-	 * The both bits could be set since only one will be wrote
-	 * due to mask value.
-	 */
-	if (level)
-		bdtr |= TIM_BDTR_BKP | TIM_BDTR_BK2P;
+	bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke;
 
-	bdtr |= (filter & TIM_BDTR_BKF_MASK) << shift;
+	if (bi->level)
+		bdtr |= bkp;
 
 	regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
 
@@ -512,11 +512,25 @@ static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
 	return (bdtr & bke) ? 0 : -EINVAL;
 }
 
-static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
+static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv,
 				       struct device_node *np)
 {
-	struct stm32_breakinput breakinput[MAX_BREAKINPUT];
-	int nb, ret, i, array_size;
+	int nb, ret, array_size;
+	unsigned int i;
 
 	nb = of_property_count_elems_of_size(np, "st,breakinput",
 					     sizeof(struct stm32_breakinput));
@@ -531,20 +545,21 @@ static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
 	if (nb > MAX_BREAKINPUT)
 		return -EINVAL;
 
+	priv->num_breakinputs = nb;
 	array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
 	ret = of_property_read_u32_array(np, "st,breakinput",
-					 (u32 *)breakinput, array_size);
+					 (u32 *)priv->breakinputs, array_size);
 	if (ret)
 		return ret;
 
-	for (i = 0; i < nb && !ret; i++) {
-		ret = stm32_pwm_set_breakinput(priv,
-					       breakinput[i].index,
-					       breakinput[i].level,
-					       breakinput[i].filter);
+	for (i = 0; i < priv->num_breakinputs; i++) {
+		if (priv->breakinputs[i].index > 1 ||
+		    priv->breakinputs[i].level > 1 ||
+		    priv->breakinputs[i].filter > 15)
+			return -EINVAL;
 	}
 
-	return ret;
+	return stm32_pwm_apply_breakinputs(priv);
 }
 
 static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
@@ -614,7 +629,7 @@ static int stm32_pwm_probe(struct platform_device *pdev)
 	if (!priv->regmap || !priv->clk)
 		return -EINVAL;
 
-	ret = stm32_pwm_apply_breakinputs(priv, np);
+	ret = stm32_pwm_probe_breakinputs(priv, np);
 	if (ret)
 		return ret;
 
@@ -647,6 +662,42 @@ static int stm32_pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused stm32_pwm_suspend(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	unsigned int i;
+	u32 ccer, mask;
+
+	/* Look for active channels */
+	ccer = active_channels(priv);
+
+	for (i = 0; i < priv->chip.npwm; i++) {
+		mask = TIM_CCER_CC1E << (i * 4);
+		if (ccer & mask) {
+			dev_err(dev, "PWM %u still in use by consumer %s\n",
+				i, priv->chip.pwms[i].label);
+			return -EBUSY;
+		}
+	}
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_resume(struct device *dev)
+{
+	struct stm32_pwm *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
+	/* restore breakinput registers that may have been lost in low power */
+	return stm32_pwm_apply_breakinputs(priv);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume);
+
 static const struct of_device_id stm32_pwm_of_match[] = {
 	{ .compatible = "st,stm32-pwm",	},
 	{ /* end node */ },
@@ -659,6 +710,7 @@ static struct platform_driver stm32_pwm_driver = {
 	.driver	= {
 		.name = "stm32-pwm",
 		.of_match_table = stm32_pwm_of_match,
+		.pm = &stm32_pwm_pm_ops,
 	},
 };
 module_platform_driver(stm32_pwm_driver);
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 6f5840a1a82d..581d23287333 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
 
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 }
 
@@ -156,7 +156,6 @@ static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
 	if (sun4i_pwm->data->has_prescaler_bypass) {
 		/* First, test without any prescaler when available */
 		prescaler = PWM_PRESCAL_MASK;
-		pval = 1;
 		/*
 		 * When not using any prescaler, the clock period in nanoseconds
 		 * is not an integer so round it half up instead of
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c
deleted file mode 100644
index e9c26c94251b..000000000000
--- a/drivers/pwm/pwm-tipwmss.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * TI PWM Subsystem driver
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-#include <linux/of_device.h>
-
-static const struct of_device_id pwmss_of_match[] = {
-	{ .compatible	= "ti,am33xx-pwmss" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, pwmss_of_match);
-
-static int pwmss_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct device_node *node = pdev->dev.of_node;
-
-	pm_runtime_enable(&pdev->dev);
-
-	/* Populate all the child nodes here... */
-	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
-	if (ret)
-		dev_err(&pdev->dev, "no child node found\n");
-
-	return ret;
-}
-
-static int pwmss_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver pwmss_driver = {
-	.driver	= {
-		.name	= "pwmss",
-		.of_match_table	= pwmss_of_match,
-	},
-	.probe	= pwmss_probe,
-	.remove	= pwmss_remove,
-};
-
-module_platform_driver(pwmss_driver);
-
-MODULE_DESCRIPTION("PWM Subsystem driver");
-MODULE_AUTHOR("Texas Instruments");
-MODULE_LICENSE("GPL");