aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pwm
diff options
context:
space:
mode:
authorPaul Cercueil <paul@crapouillou.net>2020-03-23 15:24:20 +0100
committerThierry Reding <thierry.reding@gmail.com>2020-03-30 18:03:09 +0200
commitc2693514a0a1ec3abcb4673775af3edc797e8a07 (patch)
treeef380b00d25a48e8b41a8b52eb4f945a36f786bd /drivers/pwm
parentpwm: jz4740: Improve algorithm of clock calculation (diff)
downloadlinux-dev-c2693514a0a1ec3abcb4673775af3edc797e8a07.tar.xz
linux-dev-c2693514a0a1ec3abcb4673775af3edc797e8a07.zip
pwm: jz4740: Obtain regmap from parent node
The TCU registers are shared between a handful of drivers, accessing them through the same regmap. While this driver is devicetree-compatible, it is never (as of now) probed from devicetree, so this change does not introduce a ABI problem with current devicetree files. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'drivers/pwm')
-rw-r--r--drivers/pwm/Kconfig1
-rw-r--r--drivers/pwm/pwm-jz4740.c67
2 files changed, 44 insertions, 24 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 6729b0ba1252..eebbc917ac97 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -236,6 +236,7 @@ config PWM_JZ4740
tristate "Ingenic JZ47xx PWM support"
depends on MACH_INGENIC
depends on COMMON_CLK
+ select MFD_SYSCON
help
Generic PWM framework driver for Ingenic JZ47xx based
machines.
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index f4c6c69d0bf6..549e6c750bac 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -13,17 +13,19 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
-
-#include <asm/mach-jz4740/timer.h>
+#include <linux/regmap.h>
#define NUM_PWM 8
struct jz4740_pwm_chip {
struct pwm_chip chip;
+ struct regmap *map;
};
static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -76,36 +78,39 @@ static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
+
+ /* Enable PWM output */
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
- ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
- jz4740_timer_enable(pwm->hwpwm);
+ /* Start counter */
+ regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
return 0;
}
static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
/*
* Set duty > period. This trick allows the TCU channels in TCU2 mode to
* properly return to their init level.
*/
- jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
- jz4740_timer_set_period(pwm->hwpwm, 0x0);
+ regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
+ regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
/*
* Disable PWM output.
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
- ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, 0);
/* Stop counter */
- jz4740_timer_disable(pwm->hwpwm);
+ regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
}
static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -115,7 +120,6 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long long tmp = 0xffffull * NSEC_PER_SEC;
struct clk *clk = pwm_get_chip_data(pwm);
unsigned long period, duty;
- uint16_t ctrl;
long rate;
int err;
@@ -163,24 +167,32 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- jz4740_timer_set_count(pwm->hwpwm, 0);
- jz4740_timer_set_duty(pwm->hwpwm, duty);
- jz4740_timer_set_period(pwm->hwpwm, period);
+ /* Reset counter to 0 */
+ regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
+
+ /* Set duty */
+ regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
- ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
- ctrl |= JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+ /* Set period */
+ regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
+ /* Set abrupt shutdown */
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+ /* Set polarity */
switch (state->polarity) {
case PWM_POLARITY_NORMAL:
- ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH, 0);
break;
case PWM_POLARITY_INVERSED:
- ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH,
+ TCU_TCSR_PWM_INITL_HIGH);
break;
}
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-
if (state->enabled)
jz4740_pwm_enable(chip, pwm);
@@ -196,13 +208,20 @@ static const struct pwm_ops jz4740_pwm_ops = {
static int jz4740_pwm_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct jz4740_pwm_chip *jz4740;
- jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+ jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
if (!jz4740)
return -ENOMEM;
- jz4740->chip.dev = &pdev->dev;
+ jz4740->map = device_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(jz4740->map)) {
+ dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz4740->map));
+ return PTR_ERR(jz4740->map);
+ }
+
+ jz4740->chip.dev = dev;
jz4740->chip.ops = &jz4740_pwm_ops;
jz4740->chip.npwm = NUM_PWM;
jz4740->chip.base = -1;